Best Neewer Monopod Heads in 2026

360 Degree Swivel: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle

Comes with 3/8'' Bottom Screw Thread; You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing

1/4"" Arca Type QR Plate; Easy to set up in seconds, it has both horizontal and vertical bubble level to enhance perception of position

Patenet CLAW quick release design and creative cold shoe design--ULANZI patent design offers camera Super Quick Release Mount instead of screwing, also offers vlog microphone mount solution.

Slide lock, safe and secure--Slide lock to avoid damage of mistouch.

Available for CLAW system--Quick release top cap mount could connect CLAW series products, swtich easily and quickly.

Gimbal-type design allows you to rotate your lens around its center of gravity and thus easily manipulate very large lenses

Rugged design offers stiffness, capacity and smooth tilt movement in a compact and lightweight package (349 grams)

Arca Swiss style clamp supports a variety of medium and telephoto lenses. Improves lens carrying comfort

📹 Professional Video Head: Comes with 1/4 inch mounting screws which fit most standard video equipment; Standard 3/8 inch threaded screw port on the bottom makes it suitable for all tripods, monopods, light stands, and camera sliders.

📹 Removable assembly: fully adjustable pan/tilt arm can be operated on either side of the head.

📹 Ergonomic Design: Fluid head pan/tilt locking,360° pan and +90°/-83° tilt range; effortless photography and videography shooting.

【ArcaSwiss + Quick Release Plate】- Arca Swiss + standard quick release plate, wide compatibility. There have limited screw to prevent the camera from falling. If you remove the limit screw, we reserve a place for you to save it to prevent loss.

【360 Degree Swivel】: ULANZI Ball Head Weights Only 119g, but provides 10KG/22lbs Loading Capacity. ULANZI Ball Head Equips with 2 U-shaped slots for Horizontal/Vertical/Side Adjustment, Set Your Camera at Any Angle.

【360°Rotatable Patent Cold Shoe Design】- This Ball Head is our patented design, which perfectly solves the problem that other ball head on the market cannot install the camera and microphone at the same time. The cold shoe is 360° rotatable, adjust your best angle for your micrphone or light.

❥ Specifications: 8KG/17.64lbs Max. Loading Capacity. Height: 3.9inch /10cm; Base Diameter: 2.16inch/55mm; Weight: 13.3oz/377g.

❥ 360 Degrees Swivel: 3 independent control knobs for horizontal, vertical, and side adjustment, adjust different rotation angle. Built in bubble level indicators. Also support panoramic shoots.

❥ All-metal ball head: Ball head diameter is 36mm / 1.4in, very smooth hand feel and excellent durability.

REMOVABLE HANDLE: It comes with a non skid handle bar, convenient Turn the Ball Head with handle in the film, ideal for outdoor and indoor professional shooting, allowing quick level adjustment and precise shooting

360 DEGREE SWIVEL: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle

3/8" BOTTOM SCREW THREAD: Ball Head Comes with 3/8" Bottom Screw Thread, You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing

【UNIVERSAL COMPATIBILITY】SmallRig mini ball head features 1/4 " thread QR plate screw, 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread which is suitable for most DSLR cameras, camcorders, tripods, sliders, monopods.

【360 Degree Swivel Tripod Head】 Ensure 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt and -50°/+50° lateral tilt for multi-angle adjustment including horizontal shooting and vertical shooting.

【PRECISION PANNING BASE】The base of SmallRig ball head is finely laser-engraved in 5° increments from ±0°-330° for tracking progressive panning, ideal for multi-shot panoramic photography

【Lower-profile More Stable】Compared with traditional tripod ball head, the gravity center of ARTCISE LB52 is lowered 15%, low-profile ball head design create stronger locking force and higher stability.

【Sturdy And Durable】This low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, anodized surface, it is very strong and durable.

【Excellent Design】This ball head adopt double U-shaped groove design, You can easily switch into vertical shooting mode from horizontal mode.52mm large ball provides 66lbs /30KG loading capacity.

HIGH STABILITY: Low profile ball head design create stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability

WIDE COMPATIBILITY: Equipped with 1/4"" screw, the removable Arca type quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod

FREE ROTATION BALL HEAD: Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions

【Low Profile More Stable Ball Head】 This ball head uses a low center of gravity design, CNC machining with a 0.1mm tolerance, and a 44mm large ball diameter, making it extremely stable. The arca type quick release plate is easy to use, and the security slot helps protect your camera

【Heavy Duty with All-Metal Structure】 Adopt lightweight all-metal structure with double groove, Vertical Rotation Angle: 0-135 degrees, this ball head with 1/4” screw quick release plate makes it easy to mount your camera, DV camcorder, telescope, and more, load capacity up to 55lb/25kg. Weight is 19.05oz/0.54kg

【Precise Adjustments】 The ball head has a 360° panning base and double bubble levels to meet the needs of precision photography and panoramic photography

professional plate enables quick and easy transfer among your camera and tripod. Save your time and energy, lessen the potential abrasion to the bottom screw thread of your camera.

Solid built by aluminum alloy, longer longevity compared to those made of plastic.

Double lock lever deliver ensurance and safety for your camera in case accidental fall off.

【Arca-Swiss quick release plate】Straight-grain knobs (non-apron design, no idling). Compared with ordinary quick release boards, it is more slip resistant and anti-dropping. Compatible with Arca-Swiss standard quick release plate of Manfrotto be free. ※Clamping range: 40-45mm

【Build In Bubble Level】There are three levels of level included (both sides of the quick release plate & the side of the locking knob), to help you perceive your position more accurately.

【Corrosion resistance & anti-skid】 The quick release plate is made of high-strength aluminum alloy material, which has undergone anodized surface treatment, which is corrosion-resistant and wear-resistant; it has a non-slip function, which can well protect the camera. ※L-shaped inner hexagonal small wrench is included. The design is simple and light. Both ends of the (wrench) can be used.

Made of metal with solid construction, it is durable and tough enough.

360 Degree Panoramic Base with 2 twist locks can set your camera at different angle easily.

1/4 inch quick shoe plate is suitable for DSLR cameras and camcorders,3/8 inch screw thread hole is for connecting tripod, monopod, slider and other stands.

【High Quality】- The fluid head is made of all-metal precision machining, which is firm and stable. The fluid head mount maximum load is 16 pounds / 7.3 kg.

【Easy To Adjust】- The video fluid head can be rotated 360 degrees horizontally and the tilt range is -70°to 90°. The rotation is smooth and the lock is firm.

【Excellent Design】 - The detachable handle can be installed on the left or right side according to your needs. The safety lock protects your camera from accidents at all times and the built-in horizontal bubble helps to adjust the level.

【Excellent Quality】The panoramic tripod ball head with handle made of ultra-high strength aviation aluminium alloy, CNC processed, 0.1MM machining tolerance, anodic oxidation. In a word, the ball head mount is solid ,stable and high quality.

【Removable Handle】The compact mini tripod ball head is equipped with a fast moving handle, which improves the operation efficiency by three times. You can install or disassemble the handle according to your needs and preferences.

【Large Load-bearing, Compact and Portable】The maximum load-bearing capacity of ball head camera mount is 22.1 lbs/10kg. Weight：0.82 pounds, ball head diameter 28 mm.

HIGH STABILITY: 28mm low profile ball head design creates stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability

FREE ROTATION BALL HEAD: Upgraded design with 360 Degree Panoramic Base with 2 twist locks which can set your camera at different angle easily and quickly tighten or loosen the ball

WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable Arca type QR plate is suitable for most DSLR cameras and camcorders. 3/8" screw hole at the bottom can be attached to tripod, monopod, slider and other stands

✅[Rich sets]The kit includes: (1)Tripod ball head kit (2)One extra quick shoe plate (3) 2PCS screw converter (4)One phone clip；Note:Camera and tripod are not included.

✅ [Upgrade design]The diameter of the tripod ball head is 36mm and it can rotate 360 degrees.The camera can be adjusted to different angles with the help of 3 adjustment knobs. One of the knobs has been upgraded from the relative design to the side design, which is better for a reflexed tripod.

✅[Flexible collocation]The bottom of the gimbal has a 3/8 inch thread, which is suitable for most tripods and monopods. Free 2PCS 3/8 to 1/4 screw converter. To match more equipment.The top 60mm quick release plate meets the Arca-Swiss standard，can be flexibly matched with cameras, camcorders, phones, projectors, thermometers and other equipment.

KIT INCLUDES: (1)Tripod Ball Head, (2)Quick Shoe Plate; Note: Camera and tripod are not included

360 DEGREE SWIVEL: Equipped with 3 knobs for adjustment, you are able to set your camera at different angle

3/8 INCH BOTTOM SCREW THREAD: Tripod Ball Head Comes with 3/8'' Bottom Screw Thread, You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing

【Low Profile Ball Head】 Featuring a lower center of gravity, this camera head is more stable and able to support a load up to 33lb (15kg). The 3/8” bottom thread with the 3/8” to 1/4” screw adapter fits most tripods, Monopod, Slider

【Arca-Swiss Compatible QR Plate】 The 38mm Arca-type quick release plate ensures safe and rapid camera mounting, and the 1/4” mounting screw is compatible with a broad range of DSLR cameras, mirrorless cameras, and camcorders. Rubber pads protect your pricey device against scratches

【360° Rotation & 90° Tilt Motion】 Swivel the 36mm ball head at 360° or tilt it at 90° in the U-shaped notch for flexible camera positioning. The panning base with a 360° scale enables precise and fluid panorama photography. And a bubble level helps you easily keep the horizon straight

<p>SOLID CONSTRUCTION: All-metal design, sturdy and durable, Made of aluminium alloy material, CNC precision processing, and surface adopts anti-oxidation treatment; The force of all-metal locking knobs are very strong to make sure the safety of your camera

<p>COMPATIBILITY: It can be mounted on the tripod, monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable; QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds)

<p>VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees

<p>COMPATIBILITY: Max Load Up to 22.05 lbs/ 10 Kilograms, 3/8 inch screw hole on the bottom for your tripods, 1/4 inch screw for your cameras/camcorders, supports GoPros, smartphones, cameras & DSLRs, Tripod & Monopod Heads

<p>DURABLE IN USE: Made of finely crafted aluminum alloy, solid and durable with efficient shock absorption, sound heat and corrosion resistance; Easy to Install and remove

<p>BUBBLE LEVEL: Easy way to keep the camera balanced (the little hoodle in the center); Lock knob will lock effectively and help move smoothly to allow for precise adjustments on the go

【CREATIVE PHOTOGRAPHIC PARTNER】This bracket can be used for both vertical and horizontal shooting, can quickly switch from 'landscape' to 'portrait', instead of using a ball joint, which needs to keep level, also can do great job

【WILD APPLICATION AND COMPATIBILITY】This quick release plate is suitable for most of cameras or DSLR, such as Canon EOS 80D T6 5D mark i 6D D800 T6i 1300D Sony a7riii a7rii A7S a6000 a6300 Nikon D750 D850 D3400 D5600 D7200 and can be use on stabilizer gimbal too

【PERFECT MILLING AND STURDY USE】Made by aviation aluminum with highly-precise CNC technique, the bracket features light weight, high strength and good durability, which will absolutely worth the money and can work with a super long life

【360 Degree Swivel Tripod Head】Ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography ，POYINCO Ball Head Equips with 2 U-shaped slots for Horizontal/Vertical/Side Adjustment, Set Your Camera at Any Angle.

【Wide Compatibility】1/4" thread hole at the bottom of the ball head and easy to install tripod, monopod, camera slider, and a mini tripod. With 1/4" screw on the top, for installing the camera,Monopod, DSLR, Phone, Gopro,and so on.

【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your needs at different angle.

➤TRIPOD FLUID HEAD - Made of high quality Aluminum Alloy,newest design of fluid drag pan head with precise craftwork,durable and tough,provide high-end solutions for photographers.

➤EXTENDED HANDLE - This Tripod Pan Head with upgraded handle which covered by non-skid handle bar,convenient to turn the ball head with extended handle,ideal for both indoor & outdoor professional shooting,allowing quick level ajustment and precise shooting!

➤360 DEGREE SWIVEL - Equipped with 3 knobs for horizontal, vertical, and side adjustment,360 degree horizontally and -70 to 90 degree vertically,support panoramic shoots,providing a wide range of shooting horizens.

360 Degree Swivel Mini Tripod Ball Head with 1/4" Screw Thread Base for DSLR Camera Camcorder.

Material: aluminum alloy and metal. High quality and durable. Package comes with a high quality 1/4 inch to 3/8 inch convert screw adapters.

360 Degree Rotating Head for Phone & Light Weight Camera, Max Load 6.6lbs/3kg.

STRONG AND WELL MADE: The 200PL-14 tripod quick release plate is made of aluminum alloy material and is processed by precise numerical control, and the surface is covered with a waterproof and anti-rust coating, no rust and no fading with good durability, it is solid but not too heavy.

EXCELLENT COMPATIBILITY: The quick release plate for manfrotto is compatible with MFTO tripod head with RC2 Rapid Connect System, including 322RC2, 468MGRC2, XPRO, 498RC2, 496RC2, 494RC2, MH804-3W, 468MGRC2, 234RC, 700RC2, and more .

QUICK INSTALL: With standard 1/4 inch quick-release screw on the bottom can help you install faster, and allows you to release and set up between camera/tripod/monopod quickly.

【THE ONLY Z TILT TRIPOD HEAD WITH ARCA-SWISS SLOT】Equipped with a standard Arca-Swiss slot (38MM), which can be inserted in a standard Arca-Swiss clamp directly; Meanwhile comes with 1/4" and 3/8" thread screw hole on the bottom to connect tripod, video track slider, stabilizer gimbal, quick release plate, monopod, camera rig, camera cage and other different devices of photography

【COMPACT AND PORTABLE】It’s designed as foldable and portable, net weight is only 150g/0.33lb, compact folded size is 3.35x1.5x0.73inch, the most portable one on the market, while the old model weighs 300g/0.66lb with a bigger size; our portable quick release bracket will not increase your burden, but still powerful

【SUPER SECURITY WITH WING NUT LOCKING】Comes with wing-nut locking on each joint, no need any hex key to adjust. It's more convenient and quick to lock the position and angle. Compare to the old model, there will be no distortion or looseness due to the load of cameras, also saves you the trouble of finding screws

The use of high-strength aluminum T6 aeronautical grade build, hard anodized surface, wear anti-scratch, texture and beautiful.

The tripod head support 360 degrees horizontally moving and 180 degrees vertically moving.Max Load up to 12kg.

The tripod head has 360-degree scale, to facilitate the splicing of the shooting . Loosen the handle to adjust the three-dimensional head,tighten the handle can fix the three-dimensional head

📷【3 IN 1 MOTORIZED SLIDER】This new motorized monopod perfectly combines the sliding movement of a slider and the lifting movement of a jib arm, in exquisite body size. With Slypod Pro, unique shots at any possible angle can be captured smoothly and precisely, from horizontal to oblique, vertical to hanging and encircling.

📷【REACH FURTHER MOVE FASTER】With the new upgrade, the Slypod Pro can extend out 520mm for a total length of 1380mm.5.5H Running Battery and can be charged by an external power supply.It also features the Arca-swiss quick release system and enhanced universal pan & tilt head design to create a foldable tripod with a built-in reverse lock.

📷【POWERFUL ROBUST & LIGHTWEIGHT】Slypod Pro is made of sturdy and light-weight carbon fiber supported by a robust foldable tripod base. The portable Slypod Pro only weighs 1460g,Horizontal Load 3.5KG and Vertical Load 6KG,so you can easily disassemble the tripod base and accommodate a backpack when heading to the next adventure.