Best Rockford Fosgate Multichannel Amplifiers in 2026

✔Suitable for Oticon miniFIT RITE receiver wires such as Oticon Alta, Nera and Ria RITE and miniRITE

✔Pack of 3 / 6 wax guard filters sets

✔Grey dial works as a removal tool

1. For brands: Phonak, Resound, Widex, Unitron, Jungle Care, and more. You could get confirmation by click "Ask a question" in our Amazon's storefront page.

2. Quantity: We offer two options for each color - 5-pack (40 filters) & 10-pack (80 filters)

3. Easy to use: Just follow the picture guide or the description as below stated.

Excellent for voice as well as bass

2 ohms

400 watts

✔FIT FOR ALL- This cleaning kit is suitable for all hearing aids, hearing amplifier, Apple AirPods, iPhone earbuds and other regular earphones and headphones. This cleaner set includes all the necessary tools to properly and quickly clean and remove earwax, moisture and dirt on your devices.

✔ALL IN ONE- This earphone cleaner includes 8 pieces: 3 different cleaning brushes, a tube/vent cleaner, a disassembly tool, a screw driver, a cleaning cloth and a zip-up case. This tool kit is intelligently designed to meet all potential cleaning need and ensure fast and effective cleaning.

✔NICE AND CONVENIENT- All brushes and tools are delicately packed in a nice and small zipping case that can be easily put into your pocket, handbag or other bags. You can carry it to anywhere in anytime. This cleaning kit will keep your hearing aids from earwax and moisture, prevent damage and minimize maintenance or replacement of your hearing aids.

1 x Taramps TS400X4 Full Range Amplifier

Quantity: 1 Amplifier Number of Channels: 04 Max Power at 13.8 VDC 2 Ohms: 400W (4 x 100W RMS) Max Power at: 13.8 VDC 4 Ohms: 252W (4 x 63W RMS) Bridged at 13.8 VDC 4 Ohms: 400W (2 x 200W RMS)

Input Sensitivity: 200mV (Vol=Max) Signal to Noise Ratio: greater than 90dB Frequency Response: (Full Range): 18Hz to 30kHz (-3dB) High Pass Crossover (HPF): 90Hz (-12dB / 8th) Low Pass Crossover (LPF): 90Hz (-12dB / 8th)

Power: A true 200-watt experience. Unlike most amplifiers or receivers, the Monolith's 200 watts per channel rating is measured with all seven channels driven across the full power bandwidth of 20Hz to 20kHz into 8-ohm loads

Dynamics: High resolution audio delivers the best in music and movie soundtracks. You deserve an amplifier capable of delivering clear and clean audio across a wide dynamic range!

More than 120dB signal to noise ratio, the Monolith 7X can clearly and accurately articulate the quietest portions, the loudest portions, and everything in between.

400 W MAX Power @ 2 Ohm x 4 Channels

200 W MAX Power @ 4 Ohm x 4 Channels

800 W MAX Bridged Power @ 4 Ohm x 2 Channels

TRUE RMS WATTS POWER: Full Range power amplifier delivers an impressive 13.8V 220W RMS @ 4-ohms - 280 W RMS @ 2-ohms - 280 W RMS @ 4-ohms Frequency response: 20Hz - 20KHz

HIGH & LOW-PASS CROSSOVER: Variable: (HPF) 120Hz - 3kHz Variable: (LPF) 50Hz - 250Hz Subwoofers reproduce sound based on a number of different range frequencies. Set the exact sound specifications for the bass frequency reproduction

MULTICHANNEL: This amplifier has up to four (4) channels for you to increase sound quality and clarity for your speakers or subwoofer audio

DS18 GEN-X3700.4D has the following RMS power: at 2 Ohms 225 watts / at 4 Ohms 150 watts / Bridge Powered at 4 Ohm 375 watts - THD Distortion 0.08%

Designed, Engineered, Developed, and Quality Controlled in the USA - Minimum THD at Rated Power: 98dB. Under Voltage Protection at 10V. Over Voltage Protection at 15V. Frequency Response: 20Hz - 20KHz. Fuse Rating 40A x 3

High-Speed MOSFET Power Supply Optical Coupler Class "A/B"Technology. Fully Adjustable 12dB. Low Pass Filter: 50Hz - 500Hz. High Pass Filter: 50Hz - 500Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control.

1 or 2 output channels with 40W, 80W, 120W per channel

Built-in 70V and 100V

Fan less, space-saving 1U design

This listing contains: (1) V1200.5 2400 Watt 5 Channel Class A/B Amplifier (1) Remote Bass Knob with Connector cable

4 x 75W + 1 x 300W @ 4 Ohms 4 x 150W + 1 x 600W @ 2 Ohms 2 x 300W + 1 x 300W @ 4 Ohm N/A + 1 x 600 @ 2 Ohm

Features: Nickel Plated Terminals Low Level Inputs Remote Bass Knob Included Mil Spec Double-Sided Glass Epoxy FR Circuit Board 4-Way Protection Circuitry: Thermal, Short Circuit, Overload and DC Offset Variable Low-Pass Crossover: 50Hz - 250Hz Variable Input Sensitivity: 200mV - 6V Phase Control: 0 - 180 Degree 45Hz Bass Boost: 0 - 12dB S/N Ratio: > 85dB THD: 0.08%

【Multi-Room Flexibility and Plenty of Power 】True multi-room workhorse that performs well with in-ceiling, indoor or outdoor speakers, the MZ-series amplifiers rated at 50 watts per channel into 8 ohms and 80 watts per channel into 4 ohms. With the Stereo/Bridge switch in the Bridge mode, each zone of channels are combined for a higher powered mono output of 160 watts into 8 ohms when needed.

【 Versatile Easy Connection to Any System】The MZ-850S can share the same music from one audio source via RCA or S/PDIF as the Global Bus Input, or you can connect up to four external audio sources like a CD player, Sonos connect, Alexa Echo, networked music streamer via RCA Line Input to play a different one in each listening room. Each zone of MZ-series amplifier has individual volume adjustment for the left and right channels, giving you precise control over your system

【Work of Art Hi-End Design】Consisting of interlocking blocks of flawless acrylic, deeply brushed and anodized black aluminum with bright Blue LED power switch and zone status indicators brings this amplifier into the beautifully styled, elegant and impressively solid feel.

Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable

Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing.

Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.