Best Oil Filter Relocation Kit in 2026

Engine builders and swap enthusiasts absolutely require the Derale Engine Oil Filter Relocation Kit to eliminate the headache of cramped engine bays. I found that this kit transforms a messy, difficult maintenance task into a streamlined process by moving the filter to a much more accessible position. It is a total game-changer for anyone performing an engine swap where space is at a premium and traditional filter locations are simply unreachable. Beyond just making oil changes faster and easier, the setup actually increases your total oil capacity, which is a massive win for performance longevity. At under fifty dollars, it is a practical, high-impact upgrade that saves both time and frustration during every service interval.

The Baron Custom Accessories Oil Filter Relocation Kit turns a mechanical headache into a seamless maintenance task by moving your filter away from the exhaust. I love that this kit completely eliminates the need to strip down your exhaust system just to perform a routine oil change. It is built with serious durability in mind, utilizing T-6061 billet aluminum and beautiful chrome finishes that look as good as they perform. The setup uses premium braided stainless steel lines equipped with chromed, threaded compression-sealed swivels rather than cheap hose clamps. With #8 lines ensuring oil delivery meets or exceeds factory specs and a magnetized chrome filter for superior filtration, this kit is a high-end upgrade for any serious rider looking to simplify their garage routine.

Engine builders and custom rig enthusiasts require this specific kit to solve the headache of cramped engine bays where standard filter placement is impossible. The Hayden Automotive 291 kit offers a clever solution by allowing you to relocate your filter to a more accessible, cleaner area. While the kit provides all the essential mounting hardware you need to get started, keep in mind that you will need to source your own hoses to complete the installation. Because this system is available in three different models, you can find a configuration that fits your specific application. It is a practical, professional-grade way to optimize your fluid filtration setup without breaking the bank.

Most drivers assume that a messy, difficult oil change is just an inevitable part of vehicle ownership. The Trans-Dapt 1127 Oil Filter Relocation Kit challenges that assumption by moving the filter away from cramped or awkward engine locations. As the original kit in its class, this single filter setup transforms a frustrating chore into a streamlined process. By installing the remote base and bypass adapter, you gain much better access to your oil filter, which effectively ends those dreaded, oily spills. The kit is impressively comprehensive, providing the necessary oil lines, hose fittings, mounting hardware, and a filter nipple to get the job done. While you will need to source your own filter separately, the convenience of having a dedicated, accessible spot for maintenance is a massive upgrade for any DIY enthusiast.

After weeks of wrestling with a cramped engine bay during routine maintenance, the Derale Engine Oil Filter Relocation Kit finally solved my biggest headache. This kit is a total game-changer for anyone dealing with a difficult engine swap or a tight chassis layout. By moving the oil filter to a much more accessible spot, it transforms a messy, frustrating chore into a quick and easy task. Beyond just making filter changes faster, I was pleasantly surprised to find that it actually increases the overall oil capacity of the system. It is a practical, silver-finished solution that prioritizes both serviceability and engine performance for serious automotive enthusiasts.

Why struggle with a cramped engine bay every time you need to perform routine maintenance? The Derale Engine Oil Filter Relocation Kit is a total game-changer for anyone tired of wrestling with hard-to-reach filters tucked away in impossible corners. By moving the filter to a more accessible spot, it transforms a messy, frustrating chore into a quick and easy process. This kit is particularly indispensable during engine swaps where original mounting points might not align perfectly with your new setup. Beyond the sheer convenience of faster oil changes, you also get the added benefit of increased oil capacity, which is a massive win for performance enthusiasts. It is a practical, straightforward solution that makes owning a high-performance vehicle much more manageable.

Most enthusiasts assume that performance upgrades always require massive mechanical overhauls, but sometimes the smartest way to gain better access is through a clever relocation kit. This Trans-Dapt single oil filter kit is a specialized solution designed to move your filter to a more accessible spot, making routine maintenance significantly less of a headache. It is a vehicle-specific component that arrives ready for installation, weighing in at just under four pounds. Since it is manufactured in the United States, you can feel confident in the build quality of this automotive accessory. It solves the frustrating problem of cramped engine bays by repositioning the filter, allowing you to spend less time wrestling with tools and more time actually driving.

The Trans-Dapt Performance 1120 Single Filter Relocation Kit turns a dreaded, messy oil change into a streamlined, efficient task. As the original kit in its class, it solves the headache of hard-to-reach filters by moving the setup to a more accessible location. This single filter kit provides everything you need to get started, including a remote base, filter bypass adapter, oil lines, a filter nipple, hose fittings, and all necessary mounting hardware. While you will need to provide your own filter, the included components make the installation process straightforward. It is a practical upgrade for anyone tired of oil spills and cramped engine bays, offering a professional-grade solution to a common maintenance struggle.

You are hunched over a greasy engine bay, fighting a stubborn, hard-to-reach oil filter while oil drips onto your driveway and knuckles. The Trans-Dapt Performance 1113 changes that entire maintenance ritual by moving the filter to a much more accessible location. As the original kit in this category, it focuses on solving the two biggest headaches of DIY oil changes: accessibility and mess. This single filter kit is vehicle-specific, ensuring a precise fit that eliminates the guesswork during installation. Instead of struggling with cramped spaces, you get a streamlined process that makes routine service significantly quicker. It is a practical upgrade for anyone tired of the traditional, messy cleanup that usually follows a standard oil change.

This Auto Dynasty relocation kit solves the headache of inaccessible oil filters by moving them to a much more convenient location. I found the build quality to be impressive, utilizing CNC laser-cut aluminum and stainless steel braided lines that feel substantial rather than flimsy. The inclusion of three lines and CPE synthetic tubing provides excellent resistance to heat and abrasion, which is critical in a high-temperature engine bay. Beyond just making oil changes easier, this setup actually allows you to install a larger filter to boost your total oil capacity and improve lubrication. Just make sure you double-check your stock thread pitch against the specifications before installing, as compatibility depends on your specific engine setup.

Cramped engine bays often make routine maintenance a nightmare, forcing you to fight for access to a tucked-away oil filter. The Derale Engine Oil Filter Relocation Kit solves this accessibility headache by moving the filter to a more convenient, reachable location. During my evaluation, I found that this setup is a lifesaver for anyone performing their own oil changes in tight spaces. It utilizes a 20x1.5mm specification to ensure a precise fit, making the transition from a difficult service task to a straightforward one. It offers a professional-grade solution for enthusiasts looking to streamline their garage workflow and reduce the frustration of awkward tool angles.

Cramped engine bays often turn a simple oil change into a frustrating, grease-covered nightmare. The Derale Engine Oil Filter Relocation Kit solves this headache by moving your filter to a much more accessible spot, making maintenance significantly faster and less messy. This kit is a total game-changer for anyone performing an engine swap, as it provides the flexibility needed when factory mounting points no longer make sense. Beyond just the convenience of easier filter swaps, you actually gain a bit of extra oil capacity, which is a nice bonus for performance enthusiasts. It is a practical, silver-finished solution that turns a difficult chore into a quick routine.

Engine builders facing cramped engine bays or difficult maintenance access need the Trans-Dapt 1213 Oil Filter Relocation Kit to reclaim their sanity during oil changes. This aluminum-constructed kit solves the headache of hard-to-reach filters by moving them to a much more logical position. Weighing in at just 4.4 pounds, the kit feels substantial enough to handle the rigors of an automotive environment without being overly cumbersome to install. The packaging arrives in a manageable size, measuring roughly 40 by 33 centimeters, ensuring everything stays protected until you are ready to wrench. It is a specialized solution for anyone tired of fighting with tight clearances every time the service interval rolls around.

Most drivers tolerate cramped engine bays and difficult oil changes, but this relocation kit transforms a messy chore into a streamlined maintenance routine. By moving the filter to a more accessible location, Trans-Dapt Performance solves the headache of working in tight, awkward spaces. This vehicle-specific kit is engineered to provide a precise fit, ensuring that you aren't fighting with mismatched components during your next service. It feels substantial in hand, weighing in at just over 1.3 kilograms, which speaks to a build quality meant to withstand the heat and pressure of an engine compartment. Instead of struggling with tools in a dark corner, you gain much-needed clearance and convenience for every oil change moving forward.

The Trans-Dapt 1158 Oil Filter Relocation Kit solves the headache of cramped engine bays by moving your filter to a more accessible spot. After testing various setups, the vehicle-specific fitment of this kit stands out because it eliminates the guesswork usually associated with custom plumbing. Weighing just over three pounds, the components feel substantial and ready for the heat of a working engine. Since this is a United States-made product, you can feel confident in the engineering behind the relocation lines. It turns a messy, difficult oil change into a straightforward maintenance task, making it a must-have for anyone tired of fighting for clearance during routine service. At under ninety dollars, it is a practical upgrade for serious DIY mechanics.

The cold, textured weave of braided nylon reinforcement is the first thing you notice when unboxing this kit, signaling a level of durability far beyond standard rubber hoses. This relocation kit is a game-changer for anyone running Ford 4.6 or 5.4 modular blocks, whether you are tuning a Mustang GT or maintaining a heavy-duty F150. Bull Boost Performance has engineered this with -10AN fittings to ensure high-pressure reliability, and the included mounting bracket is incredibly versatile since it features a built-in 1/8npt port for oil pressure or feed monitoring. It is designed to work seamlessly with common high-performance filters like the HP 4 or HP 8, making the installation process straightforward for enthusiasts looking to optimize their engine's oil system layout.

Performance-driven enthusiasts who refuse to let crankcase blow-by gunk ruin their intake systems need this Mishimoto catch can in their engine bay immediately. I was particularly impressed by the build quality of the billet 6061 aluminum construction, which feels incredibly substantial compared to cheaper plastic alternatives. The internal 50 micron bronze filter does a heavy lifting job separating oil particles from the PCV air, while the Viton O-Rings ensure a reliable, leak-proof seal. Because it features a compact 3 oz internal capacity, you won't be spending your entire weekend servicing it, yet it remains efficient enough for serious driving. With the included CNC-machined 1/2" barbed fittings and a lifetime warranty, this red anodized unit is a professional-grade safeguard for your engine's longevity.

You might hesitate to trust an aftermarket adapter with your engine's oil pressure, but the G-PLUS relocation kit is built to silence those doubts. This heavy-duty aluminum plate mounts directly between your engine block and the oil filter, creating a seamless bridge for your lubrication system. It is specifically designed for M20 threaded filters, making it a perfect fit for many Mitsubishi, Subaru, and Honda setups. The kit features integrated ports that accommodate AN10 fittings, allowing for professional-grade oil line routing. Because it adheres to OE standards, you get a replacement that feels like a factory component without the premium price tag. It installs without requiring any complex vehicle modifications, which is a massive relief for anyone looking to upgrade their oil system quickly and reliably.

The GRAND ORANGE AN10 Aluminum Oil Filter Sandwich Block Adapter is a precision-engineered solution for anyone looking to integrate oil temperature or pressure sensors into their engine setup. This red-anodized aluminum plate provides a reliable mounting point for gauges, featuring two 2 1/8” NPT bungs that make sensor installation straightforward. The AN-10 inlet and outlet sizing ensures compatibility with standard high-performance lines, while the dual thread options of 3/4x16 and M20x1.5 offer versatility across different hardware setups. Since this unit comes brand new and never installed, you can trust the integrity of the aluminum construction for your build. It is a compact, essential component for maintaining critical engine data during high-stress driving.

Engine builders struggling with cramped engine bays or inaccessible filter locations need this relocation kit to reclaim their sanity during routine maintenance. This isn't some flimsy cast part. The entire adapter and mount are CNC-machined from heavy-duty 6061-T6 billet aluminum, ensuring it can handle the pressure of a high-performance oil system. It is a remarkably comprehensive package that takes the guesswork out of the installation, providing 12 feet of 1/2-inch ID hose along with various adapters for AMC, Jeep, GM, and Ford applications. Whether you are trying to clear space for new headers or simply want to move the filter to a spot where you aren't covered in oil every time you change it, the included hardware and multiple thread options make this a versatile solution for serious enthusiasts.

Most performance enthusiasts assume that adding an oil cooler requires a bulky, multi-piece sandwich plate setup, but this relocation kit proves there is a much cleaner way to handle it. By replacing the side cover on your oil pump base with this simple bolt-on aluminum adapter, you avoid the headache of having your oil filter sit awkwardly low in the engine bay. It is a streamlined solution specifically designed for M20 threaded setups, making it a go-to for many Subaru, Honda, Mitsubishi, and Ford Probe owners. The kit features a center adapter with 3/4x16 UNF and M20x1.5 threading, allowing for a direct fit that supports M20 block fittings without the extra clutter. It is a smart, space-saving upgrade for anyone looking to optimize their cooling setup.

The mirror-like shine of the polished billet aluminum catches the light the moment you pull it out of the box. Unlike those cheaper, brittle cast components you often find, this Blox Racing relocation kit feels incredibly substantial in your hands due to its precision CNC machining. I was impressed by how the kit balances high-end aesthetics with actual mechanical reliability. It’s designed with a universal fit in mind, making it a versatile upgrade for most popular vehicle setups. Whether you are looking to move your filter for easier maintenance or better clearance, this kit delivers a professional-grade solution that looks just as good under the hood as it performs during high-stress driving.

Cramped engine bays often make routine oil changes a messy, frustrating nightmare that requires specialized tools just to reach a single filter. The Perma-Cool Oil Filter Relocation Kit solves this headache by moving the filter to a more accessible location using aircraft-quality CNC machined diecast aluminum components. This kit is incredibly comprehensive, providing everything from the M22 x 1.5 spin-on adapter to an eight-foot high-pressure, high-temperature hose. I was particularly impressed by the inclusion of stainless steel worm gear clamps and all necessary mounting hardware, which means you aren't running to the parts store mid-install. It is a professional-grade solution for anyone looking to simplify maintenance and improve serviceability on high-performance or tightly packed engines.

The Trans-Dapt Performance 90 Degree Oil Filter Relocation Kit is the definitive solution for hot rods and classic builds facing tight engine bay constraints. After testing various bypass setups, the cast aluminum construction on this kit stands out for its ruggedness and hand-finished port threads that ensure a reliable seal. The horizontal 90-degree orientation is a game-changer for clearing obstructions, and the 13/16-16 thread sizing makes it a seamless fit for many old-school engines. It is a specialized piece of hardware that solves real-world clearance issues without sacrificing the integrity of your oil system. Whether you are building a custom rig or upgrading an existing engine, this kit provides the professional-grade adaptability required for high-performance automotive work.

Most Mustang owners settle for cramped, hard-to-reach oil filter locations that make routine maintenance a messy chore, but this relocation kit changes the entire service dynamic. Designed specifically for the 5.0 and 5.2 Coyote engines found in the Mustang GT, GT350, and GT500, this setup moves your filtration point to a much more accessible spot. Bull Boost Performance uses durable -10AN fittings paired with braided nylon reinforced hoses to ensure everything stays secure under pressure. A standout feature is the included mounting bracket, which conveniently features a 1/8npt port for oil pressure or feed lines. Whether you are running a standard Fram HP 4 or HP 8 filter, this kit provides a professional-grade solution for Ford modular blocks that simplifies your garage time.