Best Aluminum Oil Tanks in 2026

Convenient wide-mouth, quart-size bottle

Clear oil level marks in black

Quickly and precisely determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes

SKU: 1200-833069T9

Sold Each

Please verify your own fitment

Designed for easier pouring

14.5-liter (3.8 US gallons) capacity

Allows a single LinQ tunnel bag and LinQ oil caddy to stack on top for more storage

▶【 Capture Oil & Protect engine 】----- Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean

▶【 Easy To Clean】 ----- The bottom with drain valve, make it more easier to clean and reuseable constantly.

▶【 Durable Quality 】 ----- Made of T-6061 Aluminum and TIG welded for Enhanced Strength and Durability

✿COMPACT DESIGN:the catch can has a small body,can save the pace in your engine.

✿UNIVERSAL FITTMENT:the catch can can be used on many cars.Just make sure there is enough space in your engine to install it .

✿MERIT:Separates oil particles from PCV/CCV air using 50 micron bronze filter. Defends intercooler, intake system and essential components from oil blow-by.Helps maintain proper octane levels to reduce potential detonation.

★ Mount Nut Diameter:16 x 1.5mm;Fuel Type:Fuel Switch Valve Petcock;Color:As photo shown;Positions Switch:ON | OFF | RESERVE.

★ Fit for Honda CB350 CB400 CB400F CB500T CB550K CB750A CB750K CB900C CX500 CX500C CX500D CB550F CB750F CJ360T CL350 CM400A 400C CB350 CM400E MR175 XL250S XL350 Hawk 400=CM400T Hawk I 400=CM400T Hawk II 400=CM400T.

★ Petcock positions:ON / RES / OFF-ON:Operate with normal fill-ups;OFF:To prevent overflows;RESERVE:To access the lower portion of the gas tank when gas level is low.

☆【Material】Made of High strength ABS with high hardness, durability and corrosion resistance, good sealing, do not worry about the oil leakage from the fuel tank

☆【Applicable models】Fit for Petcock XR CRF50 50cc 70cc 110cc 125cc Dirt Pit Bike, XR50/CRF50 style pit bikes.

☆【Important parameters】Capacity: 3.5 L(0.92 gallon),Mounting Hole Distance: 220mm / 8.66 inches,Length: 265mm / 10.43 inches,Width: 251 mm / 9.88 inches,height: 200 mm / 8.77 inches,Please check it carefully to ensure fitment before purchase.

【ABS plastic material】Made of Durable hard ABS plastic panel material, good sealing, do not worry about the oil leakage from the fuel tank

【Fitment】 Fit Honda CRF50 XR50 CRF50F (not fit Honda other modle) 50cc 70cc 90cc 110cc 125cc 140cc 150cc 160cc. And Their Copies 50cc-160cc Bikes From China, Such As Chinese Made CRF50,XR50,SSR,YCF,IMR,Atomik,Thumpstar,BSE,Kayo,Stomp,Piranha,DHZ,GPX,Pitster Pro,SDG,Braaap,Taotao,Coolster,Roketa,Lifan,YX,Ect And Many Other Chinese Brands.and etc.

【Note】known Compatible with the following models:for Honda CRF50/ Honda XR50/ Honda CRF50F/ SSR SR70 ,SR70, SR70B, SR70c, SR110, SR110SIME, SR110A1, SR125A1, SR125, SR125SIME, SR125A, SR125B2, SR125E / 125cc chinese pit bike/ TaoTao 110 / coolster 70cc / kazuma 110/ Coolster 125/ coolster when-210 70cc/ Baja DR49/ Baja 70cc/ SDG 107/ Motovox MVX70 Pit Bike/ pitster pro 90 ss/ Taotao ATD90A ATD125C DB10 DB14/

✅【LARGER CAPACITY BUT PORTABLE】: The diving tank has a capacity of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place.

✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator; when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices

✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag.

5 oz Capacity & Compatibility: The maximum capacity of the catch can is 5 oz （about 150ml), small but easy to clean, universal fit for most car,compatible with Honda Toyota Nissan Lexus Mazda Jeep Dodge Ford Chevy Volvo etc.

Washable Breather Filter Enhanced filtering: The filter respirator retains oil, and the baffle system in the fuel tank can also filter, reducing impurities from entering the intake manifold.

Reusable Constantly with Drain Valve: After installing the valve, when the can is full of oil, you just need to unscrew the valve to empty its contents without reinstalling and it could be reused constantly.

Material- Boat fuel tank 3 gallon is made of high-density polyethylene as the base material，anti-aging, impact resistance, corrosion resistance . It can naturally rebound without permanent deformation after encountering an impact.

Convenient to Carry and Place- The outboard motor fuel tank equipped with an I-shaped lifting handle, which is more ergonomic, easy to carry and store，rust protection, durable, beautiful, easy to use handle design, light weight and portable, convenient to place and carry.

Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use( high-quality spring designed for deflation. Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage.

【Compatible with】2011-2021 F150 5.0L;2011-2021 F150 5.0L with Roush/Whipple superchargers;2011-2021 F150 3.5L Ecoboost;2015-2021 F150 2.7L Ecoboost;2017-2021 Raptor 3.5L Ecoboost;2018-2021 Expedition 3.5L EcoBoost.

【Portable Separator】The sight glass lets you know the amount of oil in the can.The maxed capacity of the tank is 400ml, compact size, easy to use and clean.After installing the valve, when it gets too full of oil, you just need to unscrew the valve to empty its contents without reinstalling and it could be reused constantly.

【Features】One inlet and one Exit; Filter and can are both fully serviceable.Internal air diverter turbulates air longer to improve oil separation.

High Performance Racing turbo Oil Catch Tank Can Made Of Light Weight High Quality Aluminum.

Drain Hole Diameter is M12,Thread is 1.5

Universal Round Oil Line Catch Cans fit for most car

✔Fitment: Motorized bike gas tank 4l 1.06 gallons for 2 stroke 49cc 60cc 66cc 80cc Engines Motorized Bicycle Bikes.

✔Fit: 50cc 60cc 70cc 80cc 90cc Motorcycle.

✔Material: Metal fuel tank is well sealed and does not leak oil easily.

Capacity : 1.2L Large capacity with bigger ports, ideal for big cc engine

Made of high quality 2.5mm aluminum sheet, TIG welded construction

Prolongs your engine life by filtering the oil mist and other substances contained in blow-by gas

The 3-gallon marine fuel tank is made of high-density polyethylene, which is anti-aging, impact-resistant and corrosion-resistant. It can bounce back naturally after an impact without permanent deformation.

12 Litre (3 Gallon) capacity most people call this a 12lt tank but its only 11.3LT Screw-on cap with breather vent.Standard nozzle: outboard motor(above 6HP)interface from the back holes.

Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use(High-quality spring designed for deflation, Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage.

Includes Pre Filter

Fits all models, years, and variants of the Maverick X3

Dual Interior Baffles

✅【Replace】For 2000-2014 110HP 115HP 135HP 150HP 175HP 200HP 225HP 240HP

✅【Note】Check manufacturer's recommended part numbers to ensure a proper fit For your application

✅【Warranty】1-year warranty protects you after your purchase

Oil tank kit comes complete with mounting hardware and a 10' supply hose and primer assembly.

Return hose is shipped with Evinrude direct injection engines.

Please verify your own fitment

✅【Replace】For Mercury Mariner Oil Tank Assy,Please select the bundle below when purchasing

✅【Note】Check manufacturer's recommended part numbers to ensure a proper fit For your application

✅【Warranty】1-year warranty protects you after your purchase

✿COMPATIBLE WITH CAR MODEL:For 92-00 Honda Civic.For 93-97 Honda Del Sol.For 94-01 Acura Integra.For 88-91 Honda CR-X.For 00-09 Honda S2000.For 94-97 Honda Accord.For 97-01 Honda Prelude.

✿FEATURES:4x 10AN inlets, 2x breather filters, and 1 battery tie down strap (for use in Honda/Acura) battery locations.

✿OUTSTANDING DESIGN:PQY battery-size tank kit is a drop in solution for your Honda / Acura. Ideal for 2 connections to valve cover and 2 connections to engine block.Can be used universally as well, supply your own tie down strap.

Function: 14.1 x 10.6 x 8.7 in. Large-capacity: 3 gallon (12L),  9.8ft Brass Fuel Hose Barb. This is an outboard fuel tank that can be used for the outboard engines.

Compatible With: For Small/Large Boats, Inflatables, Canoes And Kayaks.

Material:Made of high-density polyethylene, it will not age for a long time, has low permeability, strong corrosion resistance, impact resistance, no rust, no deformation, and long service life.

☆【Material】Made of High strength thickened ABS with high hardness, durability and corrosion resistance, good sealing, do not worry about the oil leakage from the fuel tank

☆【Applicable models】Fit for Taotao Baja ATV 150cc 200cc 250cc

☆【Important parameters】 Length * width * height : 360mm*250mm*290mm. The distance between the two bolts which are on top of the gas tank: 115mm.

Highly Robust Construction: Capacity: 58 Gallon; Flow Rate: 40 GPM. Color: Black. Made of durable polyethylene material, the portable diesel tanks are resistant to structural damage, changing weather conditions, and UV radiation. Such material can effectively extend the service life of the diesel fuel tank.

58 Gallon Diesel Tank: The portable diesel tank has a well-designed structure. Two valves are provided for pressure release, and a 13.1 ft delivery hose facilitates remote power use. The mechanical clock gauge displays the level of diesel in the tank. Besides, a 12V pump with a 40 GPM flow rate, battery clamps, and a lockable cover are also included.

Automatic Dispensing Nozzle: Made of premium aluminum alloy and PVC material, this automatic fuel nozzle features a smooth surface and sturdy construction. There is no chemical reaction between nozzle and oil, so it will not get corrosion or tarnishing, which ensures a long service time.

Standard fuel Oil House Fill

Standard oil tank fill adapter

Heating Oil Equipment

【Material】Made of metal material, good sealing, no oil leakage from the fuel tank

【Compatible】The motorized bicycle fuel gas tank fit for 49cc 50cc 60cc 66cc 80cc engine motorized bike.

【Specification】Capacity: 3L(0.79 gallon)，Mounting Hole Distance: 120mm，Length of the Gas Tank : 300 mm，Width of the Gas Tank : 170 mm，height of the Gas Tank: 100 mm

Direct fit for 2015-2017 Ford F-150 2.7L EcoBoost

Dual-can setup captures blow-by from both the PCV and CCV systems

CCV side accommodates stock pressure sensor for CEL-free running

💧Remote Oil Level Monitoring: Check the oil level of the heating oil tank with your smartphone anytime, anywhere. Easily grasp the fuel consumption of your home heating oil tank.

💧Simple Installation: Install the device on the oil tank opening after removing your tank cap with a pipe wrench. Pipe dope can be used as an auxiliary tool. Please note! ! ! This device is only for installation on above ground tanks, not for underground tanks. And it must be installed directly on the opening of the tank, do not install it on the external pipe of the tank.

💧Concentrator Design: A bell-shaped concentrator is added at the bottom of the probe, which has a larger detection range and a more accurate angle to adapt to more types of oil tanks and improve the oil level accuracy.

Universal fitment, suitable to most vehicles.

Made of high quality aluminium and TIG welded.Simple design and easy installations.

Magnetic Drain plug at the bottom for easy draining and cleaning

✅【Longer Diving Time】The S400 diving cylinder can be used for 15-20 minutes (it's a test result in an environment of 16 ft underwater and 50°F, the diving time is different from person to person). SMACO scuba tanks are not only suitable for beginners' diving practice and recreational diving (no more than 33ft), but also as a backup gas source for professional divers (no more than 100 ft).(For uncertified diver, please check in advance if your local dive shop can inflate for you)

✅【High Quality Diving Tank】The tank is made of 6061 aviation aluminum, the surface adopt anti-oxidation coating material, which can better resist seawater corrosion and rust. The regulator equipped with a decompression chamber and an explosion-proof valve for higher safety; equipped with air switch, which can be turned off when not use to avoid air leak; equipped with pressure gauge to see the real-time pressure; the release valve is equipped in the breath valve, can easily release pressure.

✅【Professional Design】The 8mm inflatable male head can match most inflatable equipment; equipped with a weight-bearing strap, the gas cylinder can be fixed to the chest, and we can check air pressure at any time underwater; The scuba tank will be split into three parts in the package: bottle body, regulator, and breathing valve, you need to assemble it by yourself before inflation and use it. You can also take it on the plane after disassembly, and inflate it at the destination.