Best Metal Gas Tanks in 2026

Briggs & Stratton 699374

Genuine Briggs & Stratton Fuel Tank Replacement

New OEM Part

SPECIALTY: All the gas containers Rotopax manufactures for the United States are molded using a patented three-layer Roto-Molding process, along with specialty formulated plastic barrier material to meet the governments new extremely low permeability requirements.

DURABLE: Roto-molded gas can that is durable with thicker walls and stronger construction make it leak-proof along with a sure seal gasket to guarantee your spout wont leak or vibrate loose.

AVAILIBLE: Rotopax are the only rotationally molded EPA and CARB compliant containers available for sale in the United States.

Sold on Amazon

Designed for easier pouring

14.5-liter (3.8 US gallons) capacity

Allows a single LinQ tunnel bag and LinQ oil caddy to stack on top for more storage

13-inch long, 10 long at tank and 6-inch wide, 5-inch deep

Current part number 532184900 replaces previous part numbers 532109202, 184900, 105738X, and 109202X.

Replacement part for many brands including Husqvarna, Poulan, Poulan Pro, Roper, Sears/Craftsman, and Weed Eater

Bracket Tie Down: 300110, Fuel Pick Up: 1, Diesel Return: No, Sender: Swing Arm A002074, Belly Tank: No

Machined aluminum 3/8 in. withdrawl fitting with 360° swivel poplock for hook-up convenience

Ethanol and biodiesel-corrosion and pit-resistant

Reliable replacement - this fuel tank directly replaces the original fuel tank on specified vehicle years, makes and models

Durable construction - this fuel tank is made from the same rugged materials as the original part for dependable service

Quality assured - this part has been validated to ensure a quality fit and long service life

Direct replacement - this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles

Recommended replacement for the original hardware when servicing or replacing the fuel tank

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

Package length: 11.43 cm

Package width: 4.064 cm

Package height: 2.032 cm

Fit Type: Universal Fit

This Cap Will Fit The Old Style Portable Moeller And Tempo Fuel Tanks

This Cap Is Manually Vented

Simply Twist The Top And Allow Your Tank To Vent

【Adaptation】This Gas Tank Skid Plate Fit for 87-95 Jeep Wrangler YJ with 15 or 20 Gallon Gas Tank.

【Replace】This is a replacement skid plate, the existing plate will need to be removed in order to install this one.

【Material】This Skid Plate is jig-welded and black powder coated for lasting durability.

The KBS Auto Fuel Tank Sealer Kit contains everything needed to seal a tank of up to 25 gallons. It is an All Inclusive Kit!

This Kit Includes KBS Klean, RustBlast, Tank Sealer, Gloves and Complete Directions.

The Tank Sealer Permanently seals pinholes & weld seams and is Impervious to all fuels, alcohol additives and most solvents.

Hold down kit designed to secure portable fuel tanks

Includes two straps with quick release buckles and all required fasteners and deck fittings

Size: 63 inches

Country Of Origin: China

Package Height Of The Item Is 15.0"

Package Length Of The Item Is 20.0"

Feed Diesel Directly Into Your Fuel Line from Your Truck Bed

All Hoses and Hardware Included

Some Cutting Required On The OEM Fuel Hose

Today, Acerbis continues to produce innovative and protective aftermarket accessories with the same enthusiasm and passion as their founder had in the early years.

Over 30 years of experience with the best off-road racers in the world has enriched their constant technical development, allowing them to become a premier company within the motorcycle industry.

Acerbis fuel tanks provide additional fuel capacity while still providing slim ergonomics and sleek styling.

Fuel Switch Petcock Outlet OD is 7mm, Nut threading is 18mm x1mm, Hex nut is 24mm

Fit for Honda TRX200SX FourTrax Of Year 1986-1988;TRX250 FourTrax Of Year 1985-1988;TRX250X FourTrax Of Year 1985-1992; TRX300 FourTrax Of Year 1988-2000;

Fit for Honda TRX300EX Of Year 1993-2008; ATC250ES Big Red Of Year 1985-1987; ATC250SX Of Year 1985-1987; ATC350X Of Year 1985-1986;

Reticulated Polyethylene. All Acerbis tanks include gas cap, mounting kit, and vent hose.

➹Tank measures 12" (L) x 12" (W) x 8" (H),Mounting Tabs Measure 13-1/2" (L) x 9-3/4" (W) Center to Center

➹Dual -10 outlets,Dual -10 vent outlets (top Of cell),Sump Measures 6" x 6" x 2" Deep

➹5 Gallon Aluminum Fuel Tank. Fuel tank made with high grade aluminum for extra protection. Mirror Chrome Polished Finish

[Function] The gas tank rising lift enhances the appearance of the motorbike, and at the same time, reducing buffeting.

[Easy Installation] The gas tank rising lift is easy to install without removing your tank, just unbolt, lift up and install the new one.

[Good Quality] Made of good quality material that is durable and intends for long service life.

Package included: 1 x Aluminum Fuel Tank

Tank measures 16.5" (L) x 16.5" (W) x 9" (H) . Mounting Tabs Measure 18" (L) x 14-1/4" (W) Center to Center

Fits Fuel Cells using 12-Bolt Base

Top Quality aftermarket Gas Fuel Petcock Valve Switch with Rubber seal and decoration O-Rings

Replace for YAMAHA OEM Number 21V-24500-11-00 and some unknown #, you may match the Mounting sizes fuel outlet size before Purchasing

Gas Fuel Petcock Valve Switch For Suzuki LTZ 250 LTZ400 LTZ400Z 2003-2008, For Yamaha TTR 90 125 230 250 2000-2011, For Yamaha Moto-4 YFM200 1985-1989 Yamaha Moto-4 YFM225 1986-1988 Yamaha Moto-4 YFM250 1990-1991

One of the best fuel tanks available in the industry with a 3-year limited warranty. The 6.0 gallon Dura-Tank self-sealing fuel connector, auto one-way venting, excess fuel line storage, and a built-in fuel cap retainer. Designed to withstand alchohol extended fuels.

For use on outboards up to 150hp with 3/8" hose assembly (not included)

Dimensions of tank are 18.5" x 11.5" x 11.5"

Fit for model: 16950-GCF-671,16950-GEL-701,16950-MN1-871<br> 16950GCF671,16950GEL701,16950MN1871<br>Fit for model: 16950-GCF-671,16950-GEL-701,16950-MN1-871 16950GCF671,16950GEL701,16950MN1871,Please check the detailed fitment in the product description below.

Fit for CRF50F 2004-2009,2011-2015;CRF70F 2004-2009,2011;<br> CRF80F 2004-2007;CRF100F 2004-2009,2011;CRF150F 2003-2009;<br> CRF230F 2003-2009;XR50R 2000-2003.<br>

Fit for XR70R 1997-2003;XR80R 1985-2003;XR100R1985-2003;<br> XR200R 1981-2002;XR250R 1981-1982,1984-2004;XR350R1983-1985;<br> XR500R 1981-1984;XR600R 1985-2000.<br>

1.Only for diesel

2.Designed to Work with 3/8-Inch Female Pipe Thread Drain Fitting

3.Compatible with Ford & Dodge 2012&older，Also Compatible with Chevy/GMC 2011&newer

Transfer tank service part

Vented gas cap only

Replaces Dee Zee transfer tank cap (excludes threaded neck)

Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems

Cap with built-in vacuum valve means no need for manual venting

Meets EPA and CARB (California Air Resources Board) regulations

Perfect companion for Boating

High quality with low price

Durable and easy-to-read gauge

🚙EASY TO INSTALL: The auxiliary fuel kit used to connect the RDS tank to the truck is for diesel fuel only. The diesel installation kit is easy to install and provides a stable gravity fuel supply to control the fuel level from the OE tank.

🚙 KIT INCLUDES:REDROCK PERFORMANCE RDS Auxiliary Fuel Tank Kit is designed for 3/8" female fuel outlet fittings. The auxiliary fuel tank install kit includes fittings, hoses and clamps, as well as the required hoses and hardware. Compatible with Ford & Dodge 2012&older, Chevy/GMC 2011&newer.

🚙UNIQUE DESIGN: The black tube surface is electrophoresis treated, which looks more shiny and effectively prevents corrosion. The aluminum valve is also oxidized in its original color. The threads are also made stronger by adding anti-seize.