Best Stens Gas Cans in 2026

Thumb button control for precise pouring7/8-inch funnel spout fills even the smallest equipment Attached dust cover keeps your spout clean Integrated 20 mesh stainless steel screenCARB and EPA Compliant

Durable HDPE

Virtually eliminates hydrocarbon emissions

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

Fit Type: Universal Fit

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

Spill Proof Spout

Two Handles

Durable HDPE Plastic

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Long Flexible Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that won’t go brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and more time using the fuel.

Lightweight And Durable - This gas can spout lightweight and durable. You can easily attach it to any gas and water cans for keeping spare gasoline to carrying out chores around the house. With this gas spout kit, you can update your old gas can. This kit comes with two unique spouts, one a regular spout and another Vent Kit 8" Spout Extension For Those Hard To Reach Tanks.

Unbreakable And High-Quality Material - This kit includes two spouts. It’s an excellent product. It does come with vents, which is a major plus for everyone that hates spill-proof tanks’ limitations. It does everything it says it will without a struggle.

Gas Can Spout Replacement, The upgraded gas can spout kit is more compatible and the length of the hose is longer. Oil jug mouth sizes from 1.7in-1.82in both can be used. The total length of the hose is 11.2in, which is more convenient and flexible to use. Please measure your oil cans mouth size before purchasing.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Helps fill all equipment, no awkward bending, tipping, or holding required.

DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches

FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless.

Update your Old Gas Cans and Water Jugs. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction.

As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

3 Gas Spout including Rubber Gasket. Spout Length: Approx. 8.25”. Spout Fits on most of the cans out there. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can safety Spout is the best way to stop fuel shortcomings.

Car replacement fuel hose: 14-inch transparent fuel tank hose with a thread size of 3/4 inch (standard), suitable for 5-gallon vp racing fuel jug , including VP Racing, vp racing fuel jug hose, LC2 tanks, and Scribner fuel tanks .

Durable material: The water bottle hose is made of high-quality PVC material to ensure a safer working environment. Upgrade most racing gasoline tanks and fuel tanks.

Refueling without leakage: The racing fuel hose is the curved design allows you to easily put the nozzle in the refueling container without spilling liquid. This new design is screwed into the fuselage to ensure that it will not leak or pop out during transportation

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

EASY TO POUR GAS CAN – 2-gallon fuel container for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

CONTROLLABLE FLOW WITHOUT SPILLS – SmartControl controllable flow rate means no spilling, allowing you to squeeze less for a little, or squeeze more for a lot

FAST FILLS – Integrated air vent in spout and included funnel makes for fast flows of up to 3 gallons per minute, saving you time and hassle

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Long service time: the rubber ring can gaskets are made of tensile rubber material, durable and sturdy, not wear or tear, rust and corrosion resistant, flexible and not easy to break or split, supporting a long time service period

Adequate amount: you will receive several pieces of gas can spout gaskets in the package, which are sufficient to satisfy your daily application and replacement, you can also send them to your farther, boyfriend and neighbors who need them

Suitable dimension: the size of the fuel washer seals measures approx. 3.8 cm/ 1.5 inch in outer diameter and 3 cm/ 1.18 inch in inner diameter, please confirm the measurement before your buying

Specs: Description: Fuel Can 6" Spout Extension, Fits all No-Spill cans, Easily extend your No-Spill spout with a flexible extension to fill those hard to reach applications, Made of high grade flexible fuel hose

Replaces OEM Numbers: No-Spill: 0206, Toro: 127-3206

Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order.

Not compatible with greater than 10% ethanol fuel

Holds 1 gallon and 4 oz. of gas and oil mixes

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

Gas Can Spout Kit for most 1/2/5/10 gallon tanks, we offer 1 spouts, 1 spout sealing caps, 1 extra rubber gaskets, 1 replacement vent caps, 1 threaded collar caps, 1 coarse threads and 1 fine threads. It can be used for tanks with a 1.75" tank opening size. Please measure your tank port size before purchasing. The new upgraded coarse threaded tank port cap reduces the height of the tank cap and ensures that the cap can be completely sealed.

High quality material, these gas tank nozzle replacements are made of high quality HDPE material, which can be freely bent without breaking in use. Thicker and wider rubber gasket can fit the cap better and prevent liquid leakage when refueling, the quality is far higher than other similar products.

Anti-spill design, the air outlet tube and air outlet cap are threaded, and there is a rubber seal inside the air outlet cap. Tighten the gas outlet cap after use. No oil will spill even when transported or when the tank is lowered. The extra complimentary rubber ring also provides timely replacement.

Specs: Description: 2 Gallon Plastic Gasoline Fuel Can, CARB: Approved, Ethanol: Not compatible with greater than 10% ethanol fuel, Holds 2 gallons of gas and oil mixes, Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers, Made of durable HDPE with barrier materials to virtually eliminate hydrocarbon emissions, Vapor locking quick-flow spout closes automatically with an air tight seal, Flameshield internal flame mitigation device includes

Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order.

Stens branded parts are trusted by professional dealers tperform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging.