Best Scepter Gas Cans in 2026

New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack

NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!

Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow

Plastic

High density polyethylene

Tough, rugged, and durable

6 Gallon capacity fuel tank measures 19.3"L x 12.2"W x 10.2"H

Rugged one-piece, tank shell construction designed to reduce fuel evaporation and retains octane value for longer periods Easily carry under seat portable fuel tank from your boat to the dock with integrated top handle Convenient combination fuel pick-up/sight gauge accepts standard 1/4 NPT marine tank fittings

Molded from UV stabilized, high density polyethylene for long life Automatic air inflow valve/fuel cap system Works with gasoline and ethanol blended fuels Made in Canada

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Long Flexible Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that won’t go brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and more time using the fuel.

Lightweight And Durable - This gas can spout lightweight and durable. You can easily attach it to any gas and water cans for keeping spare gasoline to carrying out chores around the house. With this gas spout kit, you can update your old gas can. This kit comes with two unique spouts, one a regular spout and another Vent Kit 8" Spout Extension For Those Hard To Reach Tanks.

Unbreakable And High-Quality Material - This kit includes two spouts. It’s an excellent product. It does come with vents, which is a major plus for everyone that hates spill-proof tanks’ limitations. It does everything it says it will without a struggle.

Ideal for Tight Spaces - This gas can replacement spout helps pour fuel easily in standard vehicles. In addition, the extendable replacement spout will let you add fuel even in an eminently narrow opening

Update Your Old Gas Cans - With the EZ-POUR gas can spout replacement kit, you don’t have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our kit for easy storage and transportation of fuel and water

No More Fuel Spillage - Our gas can spout replacement kit allows you to transport or store fuel conveniently. Everything is included in this kit to ensure no fuel spillage or leakage. The universal kit includes a long flexible spout with a spout cap, base cap, thread cap, gasket, flame arrestor & push-in vent to meet all your gas can replacement needs. With this kit, you can easily manage the fuel flow evenly

Coarse thread-fits standard water/gas/diesel cans like Scepter, Midwest, Briggs, Wedco, Eagle (plastic can only), Igloo (water can only).

Includes chemical-resistant Buna-N ring gaskets, 2.4mm thick; good durability while allowing cap to fully screw onto can.

Perfect for storage & transportation

Includes child resistant spout with automatic shut-off and overflow protection

Internal venting so fumes do not escape into the air

Plastic contains additive to combat permeation of fumes through can walls

Can Type: Fuel

Capacity: 6.6 gallons

Support: Pack mount not included

EASY TO USE GAS CAN – 5.3-gallon fuel container for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

SELF-VENTING SPOUT – The self-venting spout helps create a smooth fuel flow to minimize spilling

FOUR (4) - Blitz Spouts / Nozzles / Rings & 4 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

TWO (2) - Blitz Spouts / Nozzles / Rings & 2 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

EASY TO POUR GAS CAN – 5-gallon fuel container with additional rear handle for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

FAST FILLS – Integrated air vent in spout makes for fast flows of up to 3 gallons per minute, saving you time and hassle

FLAME MITIGATION DEVICE – Flame mitigation device helps prevent internal vapor ignition to provide an added layer of protection for a cleaner, safer experience

2 New Packages of Scepter Spouts & Parts Kits

FITS PLASTIC SCEPTER, AMERI-CAN, EAGLE PG5 & KP SERIES, IGLOO, UNISTREAM, MOELLER, MIDWEST

DOES NOT FIT ANY JERRY CANS AS DENOTED ON PACKAGE

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

Duramax 14 gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use

Sturdy wheels making it easy to transport and you can take it to go anywhere

Features 2 brass shut off valves one at the tank and one at the hose. This allows for easy disconnect with no fuel spillage

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

【 Versatile Mounting 】Mount it anywhere with "hookup" points. Includes 8pcs of hardware for easy installation.

【 Secure Locking 】 Protect your fuel with a lockable top strap. Add your own padlock for peace of mind.

【 Adventure-Ready 】 Sturdy and space-saving design makes it perfect for your next adventure.

EXTENDED SPOUT: This Spout Kit Can Be Used As An Extended Spout Where Length Of The Nozzle Really Matter So As To Access Hard To Reach Places Without Any Spill or Mess. It is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material .Let's hit the roads & transform your old can with this FLEXIBLE GAS SPOUT REPLACEMENT that can transfer fluids easily.

As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

TWO GAS CAN CAPS: Black cap is fine coarse and used for older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans. Yellow cap is Coarse Thread and used for Midwest, Scepter and Chilton, Jerry can adapter. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently

Safety Storage

Manufacturer: Scepter

Country of Manufacturer: United States

【Material】: These can spouts are made of high strength ABS plastic for bendable and long time use.

【Easy to Pour】: Flexible spout design allows fuel to be transferred from the canister to the fuel tank without spills by making it easy to bend the spout to reach any angle..

【No spills】: Gas can nozzles are a great way to quickly end fuel spills and save fuel.

Ideal for Tight Spaces: This gas can replacement spout helps pour fuel easily in standard vehicles. In addition, the extendable replacement spout will let you add fuel even in an eminently narrow opening

USAGE: Yellow cap is coarse thread and typically fits Midwest, Scepter and EZ-POUR A1 Chilton adapter, A2 Jerry can adapter, A3 adapter, and A4 Racing Jug adapter and our A5 63MM Adapter. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans

No More Fuel Spillage: Our gas can spout replacement kit allows you to transport or store fuel conveniently. Everything is included in this kit to ensure no fuel spillage or leakage. The universal kit includes a long flexible spout with a spout cap, base cap, thread cap, gasket, flame arrestor & push-in vent to meet all your gas can replacement needs. With this kit, you can easily manage the fuel flow evenly

Replacement Spout For Scepter Containers With Child Resistant Closure And Dust Cap

Kit Containers Cap, Spout And Dust Cover, Fits All Scepter 1 1/4, 2 1/5 And 5 Gallon Containers

Manufactured In Canada

Brand New, Never Used, Not in Retail Package.

1 Aftermarket Eagle Gas Spout including Gasket. May fit of some other Brand Plastic Gas Cans using your own existing screw cap collar for Gott, Rubbermaid Essence, Blitz, Midwest, Scepter, Igloo

1 Aftermarket Eagle Stopper Cap. These Stopper Caps double as a Spout Cap and as a Stopper for this kit only

For kerosene fuel

Polyethylene

This is manufactured in Canada

2 New Aftermarket Old School Style Gas Can Spouts including Heavy Duty U-Seal Rubber Gasket

2 New Aftermarket Old School Style Stopper Caps - doubles as a spout cap and a stopper to hide spout in can

Ruler & Caliper not included, sorry

FORTY (40) Mr. Yellow Vents

Made in the USA by Tri-Sure

Fits Plastic and/or Metal Fuel Jugs/Cans!

THREE (3) - Blitz style Spouts / Nozzles Replacements

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

ONE (1) Mr. Yellow Vent

Fits Plastic and/or Metal Fuel Jugs/Cans!

Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans