Best Eagle Gas Cans in 2026

Type I safety can used to store, transport, and dispense flammable liquids safely; has single spout for filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

Type I safety can used to store, transport, and dispense flammable liquids safely; comes with a funnel to facilitate filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack

NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!

Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

Long Flexible Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that won’t go brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and more time using the fuel.

Lightweight And Durable - This gas can spout lightweight and durable. You can easily attach it to any gas and water cans for keeping spare gasoline to carrying out chores around the house. With this gas spout kit, you can update your old gas can. This kit comes with two unique spouts, one a regular spout and another Vent Kit 8" Spout Extension For Those Hard To Reach Tanks.

Unbreakable And High-Quality Material - This kit includes two spouts. It’s an excellent product. It does come with vents, which is a major plus for everyone that hates spill-proof tanks’ limitations. It does everything it says it will without a struggle.

Helps fill all equipment, no awkward bending, tipping, or holding required.

DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches

FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless.

Coarse thread-fits standard water/gas/diesel cans like Scepter, Midwest, Briggs, Wedco, Eagle (plastic can only), Igloo (water can only).

Includes chemical-resistant Buna-N ring gaskets, 2.4mm thick; good durability while allowing cap to fully screw onto can.

Perfect for storage & transportation

FOUR (4) - Blitz Spouts / Nozzles / Rings & 4 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

TWO (2) - Blitz Spouts / Nozzles / Rings & 2 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

Designed with a Wide Base and Lower Center of Gravity to Reduce Chance of Container Tipping Over During Use or Storage

Features Exclusive Flame shield Safety System

Provides a Double Layer of Protection from Accidental Fires

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

2 New Packages of Scepter Spouts & Parts Kits

FITS PLASTIC SCEPTER, AMERI-CAN, EAGLE PG5 & KP SERIES, IGLOO, UNISTREAM, MOELLER, MIDWEST

DOES NOT FIT ANY JERRY CANS AS DENOTED ON PACKAGE

【No More Spilling】: With this nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again. And the stopper cap could be a spout cap for storaging or transporting the can.

【Easier to Pour】: The flexible design of spout makes it easier to pour gas. You can adjust the angle to pour gas into tank simply and easily.

【High Quality】 : These can spouts are made of "High Density Polyethylene"(HDPE) plastic, which are bendable and durable.

Each metal gas can is made of 24-gauge hot dip galvanized steel using deep drawn construction so there is no top or side seam and has a double interlock no-weld bottom seam

The gas container has 2 openings: a pressure-relief spring-closing lid for filling, and an actuated pour valve with a flexible 12 inch metal spout for safe, controlled dispensing

The gasoline can has a leakproof, self-closing lid with a nitrile gasket that vents at 5 PSI internal pressure and a baked-on high gloss powder coat finish with trilingual labels

【5 Gallon Large Capacity】 - This 5-gallon (20L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel.

【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving.

【Easy to Carry】 - The size of the fuel tank is 14.5 inches x 6.5 inches x 18 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all.

【Material】: These can spouts are made of high strength ABS plastic for bendable and long time use.

【Easy to Pour】: Flexible spout design allows fuel to be transferred from the canister to the fuel tank without spills by making it easy to bend the spout to reach any angle..

【No spills】: Gas can nozzles are a great way to quickly end fuel spills and save fuel.

Brand New, Never Used, Not in Retail Package.

1 Aftermarket Eagle Gas Spout including Gasket. May fit of some other Brand Plastic Gas Cans using your own existing screw cap collar for Gott, Rubbermaid Essence, Blitz, Midwest, Scepter, Igloo

1 Aftermarket Eagle Stopper Cap. These Stopper Caps double as a Spout Cap and as a Stopper for this kit only

2 New Aftermarket Old School Style Gas Can Spouts including Heavy Duty U-Seal Rubber Gasket

2 New Aftermarket Old School Style Stopper Caps - doubles as a spout cap and a stopper to hide spout in can

Ruler & Caliper not included, sorry

FORTY (40) Mr. Yellow Vents

Made in the USA by Tri-Sure

Fits Plastic and/or Metal Fuel Jugs/Cans!

ONE (1) Mr. Yellow Vent

Fits Plastic and/or Metal Fuel Jugs/Cans!

Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans

3 New Aftermarket Old School Style Gas Can Spouts including Heavy Duty U-Seal Rubber Gasket

USE YOUR EXISTING COLLAR to fit Midwest, Eagle, Gott, Rubbermaid, Rubbermaid Essence, Blitz, Scepter, Unistream, Ameri-Can, Stancan, Igloo, RotoPax, Kolpin

All other parts including Stopper Cap sold separately. SPOUTS & GASKETS ONLY.

THREE (3) - Blitz Spouts / Nozzles Replacements

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

THREE (3) - Blitz Spouts / Nozzles / Rings, 3 Vents & 3 Caps

Designed to fit the Blitz fuel containers that came with the hard black plastic spout only. If you have the blitz can with a flex clear spout, these will not work as the ring is a different OD size and thread, but "may" also fit Kolpin, Rotopax, Scepter and others if the spout numbers are the same as Blitz

Made in the USA

Disposal safety can used to temporarily store liquid waste; has a 4" wide spout and a spout cap that can lock open at an 80-degree angle to facilitate pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals

Red powder-coated finish resists scratches, chipping, fading, and other wear

Spout with Gasket ONLY Scepter FS910V Self-venting

Cap Not Included

Other parts sold separately, please inquire if you need anything

Product 1: Color coding avoids accidents

Product 1: Stainless steel flame arrester prevents flashback ignition

Product 1: Easy-to-use Safe-Squeeze trigger for controlled pouring

FIVE HUNDRED (500) Mr. Yellow Vents

Fits Plastic and/or Metal Fuel Jugs/Cans!

Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans

Gas Can Spout Kit for most 1/2/5/10 gallon tanks, we offer 1 spouts, 1 spout sealing caps, 1 extra rubber gaskets, 1 replacement vent caps, 1 threaded collar caps, 1 coarse threads and 1 fine threads. It can be used for tanks with a 1.75" tank opening size. Please measure your tank port size before purchasing. The new upgraded coarse threaded tank port cap reduces the height of the tank cap and ensures that the cap can be completely sealed.

High quality material, these gas tank nozzle replacements are made of high quality HDPE material, which can be freely bent without breaking in use. Thicker and wider rubber gasket can fit the cap better and prevent liquid leakage when refueling, the quality is far higher than other similar products.

Anti-spill design, the air outlet tube and air outlet cap are threaded, and there is a rubber seal inside the air outlet cap. Tighten the gas outlet cap after use. No oil will spill even when transported or when the tank is lowered. The extra complimentary rubber ring also provides timely replacement.