Best Diesel Gas Cans in 2026

Type I safety can used to store, transport, and dispense flammable liquids safely; has single spout for filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

Thumb button control for precise pouring7/8-inch funnel spout fills even the smallest equipment Attached dust cover keeps your spout clean Integrated 20 mesh stainless steel screenCARB and EPA Compliant

Large ID zone permits user labeling of contents to avoid misuse; Meets OSHA & NFPA For Handling Hazardous liquids

Stainless steel flame arrester for exceptional corrosion protection – reliably dissipates heat to prevent flashback ignition; Long 3-1/2" (88mm) length arrester allows safe, secure placement of gas nozzle

Gasoline, Gas-Oily Mixture, Kerosine, Diesel

Rubber Gasket - Jerry can gaskets become brittle and warped over time, reducing their ability to create a seal and hold liquids inside. Thanks to Mission Automotive Replacement Can Gaskets, you'll be replacing old gaskets to renew your jerry can's holding power

The Perfect Fit - This set of jerry can gaskets perfectly fits steel/metal UK and European cans to hold a variety of liquids such as gas, diesel, oil, and water. Fits NATO 20 liters (5-gallon NATO jerry can) military spec jerry gas cans/spouts

Reliable Quality - The ring can gaskets are made of rubber material that is durable and sturdy to help prevent wear and tear while providing you with long-lasting use for your gas cans

Spill Proof Spout

Two Handles

Durable HDPE Plastic

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

💪High Tight Sealing: Non-slip stainless steel cap equipped with a sealing ring provide double guarantee of high sealing performance. The seamless butt seam welding process reinforces gas can to keep it more sturdy. Double leak-proof to provide you with double protection.

💪High-quality Stainless Steel: The gas tank is made of 304 stainless steel, anti-rust, anti falling paint & weather resistance. Compared with plastic, stainless steel gas tank won't shrink or expand in winter or summer, much safer and longer life.

💪Humanized Design: The gas can has 3 handles, which supports two people to hold it, more labor-saving and convenient. Stainless steel vent balances internal and external pressure to improve safety performance and speed up oil delivery and has a longer life. 2 different sizes to meet your different needs.

New - Retail

ROTOPAX RX-2D

Coarse thread-fits standard water/gas/diesel cans like Scepter, Midwest, Briggs, Wedco, Eagle (plastic can only), Igloo (water can only).

Includes chemical-resistant Buna-N ring gaskets, 2.4mm thick; good durability while allowing cap to fully screw onto can.

Perfect for storage & transportation

DURABLE: Heavy duty diesel can made of durable materials to last any road trip or weather condition

NO TIPPING: Designed with a wide base and lower center of gravity to reduce tipping

FLAME SYSTEM: Features Flame Safety System

Size:530ml 750ml 1000ml , /choose what you need

Made of high-quality and lightweight 7072 aluminum alloy

Suitable to storing liquid alcohol, gas, petrol, kerosene and other fuel

The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market

Made out of 0.9mm cold rolled steel, leak proof, safety lock on spout, anti-corrosive Coating on inside and outside

Bayonet style quick release nozzle. 5.3 Gallon(20 litres) capacity

Durable Welded Steel Tank

【33pcs gas can spout replacement】Suitable for most 1/2/5/10 gal gas tanks. Jake.secer gas tank nozzle kit including 4 flexible new pour spouts with rubber gaskets, 8 screw collar caps( 4 Coarse Thread & 4 Fine Thread), 4 spout caps, 4 sealing gaskets for spout caps, 4 gasket stoppers for gas can vent caps-B, 8 vent caps in two models suit for most oil cans and 1 drill bit of the proper size, so that you can install vents on your plastic gas cans much easier.

【High Quality & Easy to Use】Jake.secer gas can spouts are made from high-quality HDPE materials.It has excellent durability and bendable.The spouts also include thicker and widen rubber gaskets to help ensure a good, tight fit to the cans. Definitely easy to use, all seals worked great, easy to install, great value for your money! Enjoy the "old school" design that actually prevents spills and leaks, even in transport or upside down.

【1.75inches Nuts】The 8 Screw Collar Caps in this kit are all 1.75inches internal thread, 4 of the nuts have coarse thread and the other 4 have fine thread. They are only for 1.75inches diesel fuel cans mouth. Please measure the diameter of your gas tank mouth before purchase. With the correct match, these new nozzles are a time saver and will improve the performance of your gas can.

Designed with a Wide Base and Lower Center of Gravity to Reduce Chance of Container Tipping Over During Use or Storage

Features Exclusive Flame shield Safety System

Provides a Double Layer of Protection from Accidental Fires

EASY TO POUR GAS CAN – 5-gallon fuel container with additional rear handle for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

FAST FILLS – Integrated air vent in spout makes for fast flows of up to 3 gallons per minute, saving you time and hassle

FLAME MITIGATION DEVICE – Flame mitigation device helps prevent internal vapor ignition to provide an added layer of protection for a cleaner, safer experience

2 New Packages of Scepter Spouts & Parts Kits

FITS PLASTIC SCEPTER, AMERI-CAN, EAGLE PG5 & KP SERIES, IGLOO, UNISTREAM, MOELLER, MIDWEST

DOES NOT FIT ANY JERRY CANS AS DENOTED ON PACKAGE

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

FAST & EFFICIENT TO Fill: The 8ft kink free hose of the gas caddy ensures maximum flow and the tank is filled at the fastest speed.Wide diameter neck provides a larger opening for fill, without spilling or waste of fuel. And ergonomic hand crank, labor-saving and improve efficiency.

SAFE: Friction will cause static electricity in the process. The design of anti-static grounding clamp,it can prevent accidental static discharges and eliminate static electricity , so its safe to use. The fuel caddy is ideal for storage of gasoline and diesel.

MOVABLE & EASY TO USE: Wheel and Hand pusher design for easier mobility and transportation. The design of easy to read vent/fuel level gauge makes it convenient for you to observe the remaining oil in the tank. Reversible rotary hand pump can suck the fuel remains in the kink free hose back to the fuel tank ,convenient and waste free.

High-density polyethylene (HDPE) for durability

Fexible rotating 9 1/2in. spout fit into any fuel location

Locking nut and pin to secure spout

【High Quality Cold-rolled Plate】: This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability.

【Lightweight & Convenient to Carry】: Each has a compact size 13.78" x 6.5" x 17.91" and only weighs 6.6 lbs when empty, which doesn?t take up too much space and is easy to store.

【High-quality】: Made out of premium steel material, leak proof, safety lock on spout, anti-corrosive, coating on inside and outside. Provide you with security assurance for EPA and CARB Approved.

【5 Gallon Large Capacity】 - This 5-gallon (20L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel.

【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving.

【Easy to Carry】 - The size of the fuel tank is 14.5 inches x 6.5 inches x 18 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

1. Work With A 3/8" Female Pipe Thread Drain Fitting

2. Including All Hoses and Hardware

3. Feed Diesel Fuel Directly Into Your Fuel Tank From Your Truck Bed Transfer Tank

Helps fill all equipment, no awkward bending, tipping, or holding required.

DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches

FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless.

Product Contains: Portable Gas Tank with Pump Can Store Gasoline, Diesel, Kerosene or Biodiesel Fuels & Windproof and Waterproof Sunscreen Cloth

The Manual Siphon Rotary Pump Has Been Specially Treated to Have a Better Sealing Effect and Will Not Produce Gasoline or Diesel Leakage. Solid Rubber Wheels with Special Material, After Our Actual Measurement, It Can Be Suitable for Many Occasions.

The Army Green Cloth Cover Has Strong Wear Resistance and is Not Easy to Be Damaged. It Has the Function of Waterproof, Sunscreen and Sandproof, Which Increases the Service Life of the Oil Pot

DOES NOT CONTAIN DEF! NEW AND IMPROVED! If you buy DEF much cheaper in a bulk drum or tote, this jug is the go between, fill the jug with DEF from your bulk container, then fill your vehicle using the jug. You can also carry your own DEF on the road so you don’t over pay at the pump. Diesel Exhaust Fluid 2.5 Gallon Re-Fillable Jug for going from a bulk container with a nozzle to vehicles.

NEW SPOUT & FILL HOLE WITH THREADED CAP! Finally a way to stop using unapproved jugs to fill your vehicles with DEF. Our new spout are even thicker, wider and more durable than ever before. Offering the same tough spout from the STS-0777. Sturdy construction, large handle jug.

Be done with removing spouts and finding a place to put it while you refill the jug. Getting the product on your hands and contaminating the spout in the process. Then fumbling to replace a spout that was not made for constant removal...and now it leaks!

Can features:

Made out of 0.9 millimeter cold rolled steel for ultra durability

Unique wide-channel breather and smooth-pouring spout

High Volume 30 Gallon Fuel Caddy: The 30-gallon fuel caddy allows for easy maneuverability, letting you bring the fuel directly to where you need it, making dispensing quick and painless. Our fuel storage tank can securely hold gasoline, kerosene, or diesel. It's the perfect choice for auto repair, farms, lawns and gardens, marine uses and more.

Two Way Rotary Pump: Bi-directional hand rotary pump allows you to dispense or siphon fuels with ease, making pumping and refilling efficient by reversing the cranking direction. You can fill gas storage tanks faster without working up a sweat while safely transferring fuel.

Transport Effortlessly & Easy to Use: The anti-static ground clamp can prevent static discharges and eliminate static electricity. An accurate fill gauge lets you quickly determine your fuel level at a glance, reducing the risk of overflows. Heavy-duty 8" wheels and 2" wheels transport your caddy through the toughest terrains with ease. Filler neck with gas cap, handy tube holder, and leveraging push handle are also equipped.

[ CAP REPLACEMENT ] The TFRA-01 4th Generation Fuel Transfer Pump is made to replace the fuel spout for numerous fuel cans and containers. Compatible with Midwest Can, No-Spill Can, and other containers with our included thread adapters.

[ AUTO-STOP OVERFILL SYSTEM ] Using a sensor inside the discharge nozzle, the TFRA-01 will automatically stop the pump when your car or container is full. Experience hands-free refueling without spilling a single drop of fuel.

[ FAST REFUELING RATE ] At 2.4 Gallons per Minute (11 Liters a Minute) empty a 5 gallon can of fuel in ~2 minutes. Refuel your car, truck, motorcycle, boat, farm or lawn care equipment FAST.