Best 10 Gallon Gas Cans in 2026

Type I safety can used to store, transport, and dispense flammable liquids safely; comes with a funnel to facilitate filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

Thumb button control for precise pouring7/8-inch funnel spout fills even the smallest equipment Attached dust cover keeps your spout clean Integrated 20 mesh stainless steel screenCARB and EPA Compliant

Excellent for storage & transport of water, automotive & industrial fluid, deer corn, milo & oats, feed pellets, bird seed, rock salt, oil & liquid absorbents

VERSATILE 5 GALLON JUG: VP Racing 5-Gallon capacity motorsport utility jug. Not a portable fuel container as described by ASTM, EPA, ARB and other official agencies.

CONSTRUCTED of virgin high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment. Contains 30% more material than standard containers

Durable HDPE

Virtually eliminates hydrocarbon emissions

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

New Aftermarket Yellow blitz gas can spout Cap fits 900092 900094 900302.

High Quality Plastic and perfect for Blitz Self Venting gas Spouts

Please check the measurements shown in the picture as they don't fit other brand spouts.

6 Gallon capacity fuel tank measures 19.3"L x 12.2"W x 10.2"H

Rugged one-piece, tank shell construction designed to reduce fuel evaporation and retains octane value for longer periods Easily carry under seat portable fuel tank from your boat to the dock with integrated top handle Convenient combination fuel pick-up/sight gauge accepts standard 1/4 NPT marine tank fittings

Molded from UV stabilized, high density polyethylene for long life Automatic air inflow valve/fuel cap system Works with gasoline and ethanol blended fuels Made in Canada

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

A one-time injection molding, durable, impact-resistant, compared to traditional iron fuel packs, it have lighter weight and stronger security, seamless barrel body, will not leak. A water tank with anti-corrosion, anti-static, anti-ultraviolet function

Can be easily inserted into the tank opening, easy to use. (Storage/Refueling modes, putting in the barrel when storage, refueling out.) Discouraged holes designed to prevent backflow of negative pressure generated to save more time and effor

Can be used for holding water, oil, Universal fit for all vehicles like car, truck, small size boat.

Spill Proof Spout

Two Handles

Durable HDPE Plastic

💪High Tight Sealing: Non-slip stainless steel cap equipped with a sealing ring provide double guarantee of high sealing performance. The seamless butt seam welding process reinforces gas can to keep it more sturdy. Double leak-proof to provide you with double protection.

💪High-quality Stainless Steel: The gas tank is made of 304 stainless steel, anti-rust, anti falling paint & weather resistance. Compared with plastic, stainless steel gas tank won't shrink or expand in winter or summer, much safer and longer life.

💪Humanized Design: The gas can has 3 handles, which supports two people to hold it, more labor-saving and convenient. Stainless steel vent balances internal and external pressure to improve safety performance and speed up oil delivery and has a longer life. 2 different sizes to meet your different needs.

The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market

Highest spec steel jerry can in the world

Bayonet style quick release nozzle

Product Type:Auto Accessory

Item Package Weight:6.963 Kilograms

Item Package Dimension:50.8 cm L X52.07 cm W X77.47 cm H

ROTOPAX 1 Gallon Gasoline Pack RX-1G - CAL

Weight: 3

Dimensions: 14” x 10” x 4”

Helps fill all equipment, no awkward bending, tipping, or holding required.

DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches

FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless.

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market

Made out of 0.9mm cold rolled steel, leak proof, safety lock on spout, anti-corrosive Coating on inside and outside

Bayonet style quick release nozzle. 5.3 Gallon(20 litres) capacity

EASY TO USE GAS CAN – 5.3-gallon fuel container for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

SELF-VENTING SPOUT – The self-venting spout helps create a smooth fuel flow to minimize spilling

Durable Welded Steel Tank

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

Duramax 14 gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use

Sturdy wheels making it easy to transport and you can take it to go anywhere

Features 2 brass shut off valves one at the tank and one at the hose. This allows for easy disconnect with no fuel spillage

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

Designed with a Wide Base and Lower Center of Gravity to Reduce Chance of Container Tipping Over During Use or Storage

Features Exclusive Flame shield Safety System

Provides a Double Layer of Protection from Accidental Fires

37 pcs Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，12 * screw collar caps are all 1.75inch, 6 of them are coarse threads and the other 6 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: Gas can spout replacement kit includes complete package: 6 x screw caps (1 coarse thread and 1 fine thread),6x yellow nozzle and rubber gasket,6x Threaded Nozzle Cap,12x Gas Tank Vent Caps,6x Tube cap,1X drill

【High Quality Cold-rolled Plate】: This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability.

【Lightweight & Convenient to Carry】: Each has a compact size 13.78" x 6.5" x 17.91" and only weighs 6.6 lbs when empty, which doesn?t take up too much space and is easy to store.

【High-quality】: Made out of premium steel material, leak proof, safety lock on spout, anti-corrosive, coating on inside and outside. Provide you with security assurance for EPA and CARB Approved.

【5 Gallon Large Capacity】 - This 5-gallon (20L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel.

【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving.

【Easy to Carry】 - The size of the fuel tank is 14.5 inches x 6.5 inches x 18 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Gas Can Spout Kit for most 1/2/5/10 gallon tanks, we offer 4 spouts, 4 spout sealing caps, 4 extra rubber gaskets, 4 replacement vent caps, 4 threaded collar caps, 4 coarse threads and 3 fine threads. It can be used for tanks with a 1.75" tank opening size. Please measure your tank port size before purchasing. The new upgraded coarse threaded tank port cap reduces the height of the tank cap and ensures that the cap can be completely sealed.

High quality material, these gas tank nozzle replacements are made of high quality HDPE material, which can be freely bent without breaking in use. Thicker and wider rubber gasket can fit the cap better and prevent liquid leakage when refueling, the quality is far higher than other similar products.

Anti-spill design, the air outlet tube and air outlet cap are threaded, and there is a rubber seal inside the air outlet cap. Tighten the gas outlet cap after use. No oil will spill even when transported or when the tank is lowered. The extra complimentary rubber ring also provides timely replacement.

MADE OF SUPERIOR PLASTIC MATERIAL : The gas can nozzles are made of "High Density Polyethylene"(HDPE) materials, full of flexibility and unbreakable, so you can bend to each angle you need. the gas can spout prevents you from spills by making it easy to bend the spout to reach any direction.

UNIVERSAL FIT: This gas can spout replacement universal suit contains all you need,You can easily attach it to most gas and water cans for keeping spare gasoline on automobile and transferring fluid from your old gas can.The high-quality set lets you spend less time on vehicle maintenance in the cold condition and use the fuel for longer.

COMPLETE ACCESSORIES: Push in vent plug and everything is included as shown in the primary image. Simple to install, each set of products includes, 2 Screw Collar Caps (1 Coarse Thread & 1 Fine Thread) 1 Spouts and rubber gaskets, 1 nozzle caps with threads，2 kinds of gas con vent caps. Suitable for most 1/2/5/10 gallon gas cans.

✅【35-Piece Set 】: The gas can spout replacement kit includes 5 white nozzle, 5 rubber seal, 5 thick nut, 5 thin nut, 5 gas tank exhaust cap - A, 5 gas tank exhaust cap - B, and 5 sealing cap, suitable for most 1/2/5/10 gallon oil tanks.

✅【 High Quality Material 】: The gas can spout is made of ultra-dense HDPE high-quality material, which is resistant to gasoline corrosion, extreme heat and cold, and will not become brittle or crack in harsh weather.

✅【180 ° Bend】: The gas can spout replacement adopts a wrinkled nozzle, which not only ensures rapid liquid flow, but also adjusts the angle to easily pour gas into the tank, allowing you to spend less time in the heat and cold.

Tektall Gas Can Spout Replacement kit, Suitable for most 1/2/5/10 gallon oil cans, As shown in the picture The internal thread size is 1.35in & 2.475in, It can only be used for gas tanks with a tank mouth size of 1.4in & 2.48in. Please measure your oil tank mouth size before purchasing

【Good Helper for Oil Can】 The flexible design of spout makes it easier to pour gas. With this nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again. You can adjust the angle to pour gas into tank simply and easily

【Top Quality】 Made of high quality polyethylene.In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.And the kit have 6pcs gas cons vent cap，It is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.