Best Metal Gas Cans in 2026

Type I safety can used to store, transport, and dispense flammable liquids safely; has single spout for filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

Thumb button control for precise pouring7/8-inch funnel spout fills even the smallest equipment Attached dust cover keeps your spout clean Integrated 20 mesh stainless steel screenCARB and EPA Compliant

Precision arrester screen stops flashback ignition to reduce fire risks

Made from high-grade coated steel, each can is tested to guarantee 100% leakproof construction

Made in: United States

New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack

NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!

Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow

Rubber Gasket - Jerry can gaskets become brittle and warped over time, reducing their ability to create a seal and hold liquids inside. Thanks to Mission Automotive Replacement Can Gaskets, you'll be replacing old gaskets to renew your jerry can's holding power

The Perfect Fit - This set of jerry can gaskets perfectly fits steel/metal UK and European cans to hold a variety of liquids such as gas, diesel, oil, and water. Fits NATO 20 liters (5-gallon NATO jerry can) military spec jerry gas cans/spouts

Reliable Quality - The ring can gaskets are made of rubber material that is durable and sturdy to help prevent wear and tear while providing you with long-lasting use for your gas cans

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

💪High Tight Sealing: Non-slip stainless steel cap equipped with a sealing ring provide double guarantee of high sealing performance. The seamless butt seam welding process reinforces gas can to keep it more sturdy. Double leak-proof to provide you with double protection.

💪High-quality Stainless Steel: The gas tank is made of 304 stainless steel, anti-rust, anti falling paint & weather resistance. Compared with plastic, stainless steel gas tank won't shrink or expand in winter or summer, much safer and longer life.

💪Humanized Design: The gas can has 3 handles, which supports two people to hold it, more labor-saving and convenient. Stainless steel vent balances internal and external pressure to improve safety performance and speed up oil delivery and has a longer life. 2 different sizes to meet your different needs.

The Only Military Grade Rust Proof Steel EPA and CARB Compliant Jerry Can on the Market

Highest spec steel jerry can in the world

Bayonet style quick release nozzle

Classic metal jerry gas can

Fitted with Midwest Can company's spill-proof spout

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

Holds 5 Gallon Steel Jerry Can

Full metal construction for rugged use and abuse

Store extra gas for emergency or increase your range

Ideal for Tight Spaces - This gas can replacement spout helps pour fuel easily in standard vehicles. In addition, the extendable replacement spout will let you add fuel even in an eminently narrow opening

Update Your Old Gas Cans - With the EZ-POUR gas can spout replacement kit, you don’t have to go through the trouble of replacing your old can. Instead, you can bring your old gas can back to its new condition with our kit for easy storage and transportation of fuel and water

No More Fuel Spillage - Our gas can spout replacement kit allows you to transport or store fuel conveniently. Everything is included in this kit to ensure no fuel spillage or leakage. The universal kit includes a long flexible spout with a spout cap, base cap, thread cap, gasket, flame arrestor & push-in vent to meet all your gas can replacement needs. With this kit, you can easily manage the fuel flow evenly

5-GALLON CAPACITY: 5-gallon metal gasoline can

USE WITH LAWNMOWERS, ATVS, AND SNOWMOBILES: Great for lawnmowers, ATVs, and snowmobiles

FLAME SHIELD: Flame shield safety system

Coarse thread-fits standard water/gas/diesel cans like Scepter, Midwest, Briggs, Wedco, Eagle (plastic can only), Igloo (water can only).

Includes chemical-resistant Buna-N ring gaskets, 2.4mm thick; good durability while allowing cap to fully screw onto can.

Perfect for storage & transportation

Durable Welded Steel Tank

FIT - Fits all non-CARB NATO style Jerry Cans including popular brands such as Atlantic British and Wavian.

DURABLE - NATO-style military spec metal construction with a flexible plastic nozzle to accommodate any pouring angle.

LEAKPROOF - Has a tight bayonet closure and a heavy duty rubber gasket to make sure this spout never leaks.

Adapt Your Metal Can To Fit An EZ-POUR Spout

Fits old metal cans and plastic jugs with 1 3/8″, 1 1/2″, and 1 3/4″ necks

Update Your Trusty Metal Can With A Heavy Duty EZ-POUR Spout

Duramax 14 gallon fuel tank on wheels, ideal for farm and rural use as well as marine and recreational use

Sturdy wheels making it easy to transport and you can take it to go anywhere

Features 2 brass shut off valves one at the tank and one at the hose. This allows for easy disconnect with no fuel spillage

【 Versatile Mounting 】Mount it anywhere with "hookup" points. Includes 8pcs of hardware for easy installation.

【 Secure Locking 】 Protect your fuel with a lockable top strap. Add your own padlock for peace of mind.

【 Adventure-Ready 】 Sturdy and space-saving design makes it perfect for your next adventure.

【High Quality Cold-rolled Plate】: This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability.

【Lightweight & Convenient to Carry】: Each has a compact size 13.78" x 6.5" x 17.91" and only weighs 6.6 lbs when empty, which doesn?t take up too much space and is easy to store.

【High-quality】: Made out of premium steel material, leak proof, safety lock on spout, anti-corrosive, coating on inside and outside. Provide you with security assurance for EPA and CARB Approved.

Each metal gas can is made of 24-gauge hot dip galvanized steel using deep drawn construction so there is no top or side seam and has a double interlock no-weld bottom seam

The gas container has 2 openings: a pressure-relief spring-closing lid for filling, and an actuated pour valve with a flexible 12 inch metal spout for safe, controlled dispensing

The gasoline can has a leakproof, self-closing lid with a nitrile gasket that vents at 5 PSI internal pressure and a baked-on high gloss powder coat finish with trilingual labels

【5 Gallon Large Capacity】 - This 5-gallon (20L) large capacity tank provides you with enough endurance and is very suitable for being put on the car as a backup fuel for your journey. You don't have to worry about the lack of fuel.

【Durable & Sturdy Material】 - The fuel gas can is made of high quality cold rolled steel plate with superb welding and sealing techniques for excellent durability and robustness. You don't have to worry about a dented or damaged fuel tank from a crash during rough off-road driving.

【Easy to Carry】 - The size of the fuel tank is 14.5 inches x 6.5 inches x 18 inches (L x W x H), which is lightweight and convenient to carry. When you go out for a trip or camping, you can put this tank in the trunk of the car, which doesn't take up space at all.

【Material】: These can spouts are made of high strength ABS plastic for bendable and long time use.

【Easy to Pour】: Flexible spout design allows fuel to be transferred from the canister to the fuel tank without spills by making it easy to bend the spout to reach any angle..

【No spills】: Gas can nozzles are a great way to quickly end fuel spills and save fuel.

Ideal for Tight Spaces: This gas can replacement spout helps pour fuel easily in standard vehicles. In addition, the extendable replacement spout will let you add fuel even in an eminently narrow opening

USAGE: Yellow cap is coarse thread and typically fits Midwest, Scepter and EZ-POUR A1 Chilton adapter, A2 Jerry can adapter, A3 adapter, and A4 Racing Jug adapter and our A5 63MM Adapter. Black cap is fine thread and typically fits older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans

No More Fuel Spillage: Our gas can spout replacement kit allows you to transport or store fuel conveniently. Everything is included in this kit to ensure no fuel spillage or leakage. The universal kit includes a long flexible spout with a spout cap, base cap, thread cap, gasket, flame arrestor & push-in vent to meet all your gas can replacement needs. With this kit, you can easily manage the fuel flow evenly

Heavy duty steel construction with durable powder coat finish

Lift out tool/tote tray, two removable drawers and screw driver storage slots

Locking lid to secure contents

Steel Tank Maximum: 20 liter/5.28 gallon

Tough steel construction

Extension spout neck design

Rugged Durable Construction - This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability, perfect for the rugged off-road as the emergency backup cans.

Self-locking Lid & Anti-leakage Protection - With the bayonet closure which seals the lid tightly, you don't have to worry about spills or leaks. And the latch is fixed with a locking pin to effectively prevent accidental opening while you're on the road. Also, the quick release latch of the lid makes it easy to open the can in case of emergency.

Accelerate Pouring with Flexible Spout - Each can has a vent hole inside that allows you to empty the can quickly. The opening can also match perfectly with the flexible or fixed nozzle, which easily locks onto the can and allows you to tip it over and place it into the fuel neck on the vehicle without spilling everywhere.

FORTY (40) Mr. Yellow Vents

Made in the USA by Tri-Sure

Fits Plastic and/or Metal Fuel Jugs/Cans!

ONE (1) Mr. Yellow Vent

Fits Plastic and/or Metal Fuel Jugs/Cans!

Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans

Value Complete Package: 1×spout, 1×coarse thread bases, 1×fine thread bases, 1×spout sealing cap, 2×replacement vent caps(different types). Best cost-effective gas can spout replacement kit.

Premium Material: Made of high performance plastic, the universal gas can spout replacement kit has excellent toughness, easy to bend, light weight, Long service life. Thicker and widened rubber gaskets, can better fit the base cap that achieve better sealing effect.

Easy to Pour: The Gas Can Nozzle flexible design bends up to 90 degrees, You can adjust the angle to pour gas into tank simply and easily.

304 High-quality Stainless Steel - The gas tank is made of 304 stainless steel, anti-rust, anti falling paint & weather resistance. Compared with plastic, stainless steel gas tank won't shrink or expand in winter or summer, much safer and longer life.

High Tight Sealing - This metal gasoline bucket is suitable with various liquids such as gasoline, diesel, petrol and water. The gear-shaped stainless steel cover is equipped with a sealing ring to ensure high sealing performance. The tank body adopts seamless butt welding to make it stronger and never leaks.

Portable Flexible Spout Kit - The filter type oil guide tube can be built-in or external. The built-in tubing can be put directly into the can, no need to worry about losing. The external tubing is convenient for liquid transportation. Double use, more convenient.