Best 5 Gallon Gas Cans in 2025

Type I safety can used to store, transport, and dispense flammable liquids safely; has single spout for filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

High quality fuel dispensing machine

The only gas can that dispense fuel from the bottom of the can

The length of the Rotating and Bendable Spout makes SureCan the only can you can fill without spillage

Excellent for storage & transport of water, automotive & industrial fluid, deer corn, milo & oats, feed pellets, bird seed, rock salt, oil & liquid absorbents

VERSATILE 5 GALLON JUG: VP Racing 5-Gallon capacity motorsport utility jug. Not a portable fuel container as described by ASTM, EPA, ARB and other official agencies.

CONSTRUCTED of virgin high-density polyethylene that undergoes a 15-point quality test to ensure it can tolerate the roughest treatment. Contains 30% more material than standard containers

Color coding avoids accidents

Manufacturer: Justrite Safety Group

Approved by FM, UL/ULC, AND TUV; Also meets OSHA AND NFPA Requirements

Rubber Gasket - Jerry can gaskets become brittle and warped over time, reducing their ability to create a seal and hold liquids inside. Thanks to Mission Automotive Replacement Can Gaskets, you'll be replacing old gaskets to renew your jerry can's holding power

The Perfect Fit - This set of jerry can gaskets perfectly fits steel/metal UK and European cans to hold a variety of liquids such as gas, diesel, oil, and water. Fits NATO 20 liters (5-gallon NATO jerry can) military spec jerry gas cans/spouts

Reliable Quality - The ring can gaskets are made of rubber material that is durable and sturdy to help prevent wear and tear while providing you with long-lasting use for your gas cans

Spill Proof Spout

Two Handles

Durable HDPE Plastic

Gas Can Spout Replacemen kit, The new upgraded gas tank cover has a wider range of application. Suitable for most 1/2/5/10 gal oil cans. Oil jug mouth sizes from 1.7in-1.82in both can be used. Please measure the size of your oil jug opening before purchase to ensure that it can be installed correctly.

These kits are made of high quality HDPE material. The hoses are molded in one piece, with no steps for secondary connections that will not compromise the toughness and strength of the hose. In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

New Aftermarket Yellow blitz gas can spout Cap fits 900092 900094 900302.

High Quality Plastic and perfect for Blitz Self Venting gas Spouts

Please check the measurements shown in the picture as they don't fit other brand spouts.

Durable HDPE

Virtually eliminates hydrocarbon emissions

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

Classic metal jerry gas can

Fitted with Midwest Can company's spill-proof spout

Exceeds California Air Resource Board (CARB) and EPA requirements for portable fuel containers

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

Holds 5 Gallon Steel Jerry Can

Full metal construction for rugged use and abuse

Store extra gas for emergency or increase your range

Long Flexible Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that won’t go brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and more time using the fuel.

Lightweight And Durable - This gas can spout lightweight and durable. You can easily attach it to any gas and water cans for keeping spare gasoline to carrying out chores around the house. With this gas spout kit, you can update your old gas can. This kit comes with two unique spouts, one a regular spout and another Vent Kit 8" Spout Extension For Those Hard To Reach Tanks.

Unbreakable And High-Quality Material - This kit includes two spouts. It’s an excellent product. It does come with vents, which is a major plus for everyone that hates spill-proof tanks’ limitations. It does everything it says it will without a struggle.

Fix Your Old Cans Up With A Brand New, Heavy Duty Spout (Pre 2009 Cans Only)

High flow fuel replacement spout and vent kit

EZ Pour Hi-Flo Can Empty A 5 Gallon Vented Can in 35 Seconds And Comes With 8" Spout Extension

Helps fill all equipment, no awkward bending, tipping, or holding required.

DIMENSIONS: (D x W x H): 13.1 x 10.24 x 15.61 inches

FLEXIBLE ROTATING SPOUT: The spout is located on the bottom of the can making refueling painless.

Thumb button control for precise pouring

7/8-inch funnel spout fills even the smallest equipment

Attached dust cover keeps your spout clean

Car replacement fuel hose: 14-inch transparent fuel tank hose with a thread size of 3/4 inch (standard), suitable for 5-gallon vp racing fuel jug , including VP Racing, vp racing fuel jug hose, LC2 tanks, and Scribner fuel tanks .

Durable material: The water bottle hose is made of high-quality PVC material to ensure a safer working environment. Upgrade most racing gasoline tanks and fuel tanks.

Refueling without leakage: The racing fuel hose is the curved design allows you to easily put the nozzle in the refueling container without spilling liquid. This new design is screwed into the fuselage to ensure that it will not leak or pop out during transportation

Capacity: 5 gallon, Color: Red

Superior design with EPA/CARB compliant spout

Use for filling a lawn mower, snow blower or ATV

【33pcs gas can spout replacement】Suitable for most 1/2/5/10 gal gas tanks. Jake.secer gas tank nozzle kit including 4 flexible new pour spouts with rubber gaskets, 8 screw collar caps( 4 Coarse Thread & 4 Fine Thread), 4 spout caps, 4 sealing gaskets for spout caps, 4 gasket stoppers for gas can vent caps-B, 8 vent caps in two models suit for most oil cans and 1 drill bit of the proper size, so that you can install vents on your plastic gas cans much easier.

【High Quality & Easy to Use】Jake.secer gas can spouts are made from high-quality HDPE materials.It has excellent durability and bendable.The spouts also include thicker and widen rubber gaskets to help ensure a good, tight fit to the cans. Definitely easy to use, all seals worked great, easy to install, great value for your money! Enjoy the "old school" design that actually prevents spills and leaks, even in transport or upside down.

【1.75inches Nuts】The 8 Screw Collar Caps in this kit are all 1.75inches internal thread, 4 of the nuts have coarse thread and the other 4 have fine thread. They are only for 1.75inches diesel fuel cans mouth. Please measure the diameter of your gas tank mouth before purchase. With the correct match, these new nozzles are a time saver and will improve the performance of your gas can.

5 gallon water can UV stabilized BPA free textured military grade heavy duty resin made in Australia

Brand new, heavy duty plastic water cans. Made in Australia for the military

They are BPA free, food grade, and UV stabilized for extended outdoor use

Premium heavy-duty polyethylene construction (10" length, 10" width, 20" height)

Perfect to use while you’re at the race track, in the trailer or garage

Features tough square base and a second handle to allow easy lifting and pouring

EASY TO POUR GAS CAN – 5-gallon fuel container with additional rear handle for easy refilling of lawnmowers, chainsaws, yard tools, recreational vehicles, ATVs, motorcycles, and other gas-powered equipment

FAST FILLS – Integrated air vent in spout makes for fast flows of up to 3 gallons per minute, saving you time and hassle

FLAME MITIGATION DEVICE – Flame mitigation device helps prevent internal vapor ignition to provide an added layer of protection for a cleaner, safer experience

Designed with a Wide Base and Lower Center of Gravity to Reduce Chance of Container Tipping Over During Use or Storage

Features Exclusive Flame shield Safety System

Provides a Double Layer of Protection from Accidental Fires

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

【 Versatile Mounting 】Mount it anywhere with "hookup" points. Includes 8pcs of hardware for easy installation.

【 Secure Locking 】 Protect your fuel with a lockable top strap. Add your own padlock for peace of mind.

【 Adventure-Ready 】 Sturdy and space-saving design makes it perfect for your next adventure.

37 pcs Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，12 * screw collar caps are all 1.75inch, 6 of them are coarse threads and the other 6 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: Gas can spout replacement kit includes complete package: 6 x screw caps (1 coarse thread and 1 fine thread),6x yellow nozzle and rubber gasket,6x Threaded Nozzle Cap,12x Gas Tank Vent Caps,6x Tube cap,1X drill

High-density polyethylene (HDPE) for durability

Fexible rotating 9 1/2in. spout fit into any fuel location

Locking nut and pin to secure spout

【High Quality Cold-rolled Plate】: This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability.

【Lightweight & Convenient to Carry】: Each has a compact size 13.78" x 6.5" x 17.91" and only weighs 6.6 lbs when empty, which doesn?t take up too much space and is easy to store.

【High-quality】: Made out of premium steel material, leak proof, safety lock on spout, anti-corrosive, coating on inside and outside. Provide you with security assurance for EPA and CARB Approved.

Each metal gas can is made of 24-gauge hot dip galvanized steel using deep drawn construction so there is no top or side seam and has a double interlock no-weld bottom seam

The gas container has 2 openings: a pressure-relief spring-closing lid for filling, and an actuated pour valve with a flexible 12 inch metal spout for safe, controlled dispensing

The gasoline can has a leakproof, self-closing lid with a nitrile gasket that vents at 5 PSI internal pressure and a baked-on high gloss powder coat finish with trilingual labels