Best Kp Kool Products Gas Cans in 2026

Type I safety can used to store, transport, and dispense flammable liquids safely; has single spout for filling and pouring

Made of galvanized steel, which is resistant to rust, dents, and certain chemicals; powder-coated finish resists scratches, chipping, fading, and other wear

Flame arrestor helps prevent liquids inside the can from igniting and keep flames from spreading

New JSP Brand Aftermarket Blitz Yellow Spout Cap ~ Top Hat Style

Replaces the following Part Numbers: 900092, 900094, 9000302

Measures Approximately: Outside Diameter: 1.30 inches / Inside Diameter: .85 inch / Height: .945 inch

Fit Type: Universal Fit

New Aftermarket Yellow blitz gas can spout Cap fits 900092 900094 900302.

High Quality Plastic and perfect for Blitz Self Venting gas Spouts

Please check the measurements shown in the picture as they don't fit other brand spouts.

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 6 threaded collar caps 3 Coarse Thread &3 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

DURABLE SPOUT: The rigid spout replacement is durable, and it can fit most water jugs and older gas can models. Additionally, it is lightweight therefore making it easier to carry. Finally, it is made from high-quality plastic, meaning it is less likely to break and this resistance means a longer life span.

COMPLETE PACKAGE: The rigid spout replacement and vent kit is a complete package. You won't need to buy another spout cap separately! The whole package includes a spout, cap, replacement vent, flame arrestor, gasket and secondary base cap.

NO MORE FUEL SPILLAGE: Our rigid spout replacement comes with a sturdy cap that allows you to transport or store fuel easily. If you are looking to update your old water jug or gas can, update it today with an EZ-POUR rigid spout replacement and vent kit, and no need to worry about any fuel spillage.

Long Flexible Spout - EZ Pour Gas Can Spout is a sturdy choice, made with an extra-dense material, something that won’t go brittle and crack in the cold. This single spout is designed to ensure a fast flow, letting you spend less time in the cold and more time using the fuel.

Lightweight And Durable - This gas can spout lightweight and durable. You can easily attach it to any gas and water cans for keeping spare gasoline to carrying out chores around the house. With this gas spout kit, you can update your old gas can. This kit comes with two unique spouts, one a regular spout and another Vent Kit 8" Spout Extension For Those Hard To Reach Tanks.

Unbreakable And High-Quality Material - This kit includes two spouts. It’s an excellent product. It does come with vents, which is a major plus for everyone that hates spill-proof tanks’ limitations. It does everything it says it will without a struggle.

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, As shown in the picture The internal thread size is (1-3/4--1.7in), It can only be used for gas cans with a can mouth size of 1.75in. Please measure your oil cans mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials, In use you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas can spout cap is hexagonal) The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Coarse thread-fits standard water/gas/diesel cans like Scepter, Midwest, Briggs, Wedco, Eagle (plastic can only), Igloo (water can only).

Includes chemical-resistant Buna-N ring gaskets, 2.4mm thick; good durability while allowing cap to fully screw onto can.

Perfect for storage & transportation

Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed.

High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling.

Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down.

Gas can spout replacement and vent kit for most 1/2/5/10 gallon gas can and kettles, its highly compatible feature allows you to use different gases without changing nozzle types.

Gas can spout replacement kit includes complete package: 3 nozzles, 3 nozzle threaded caps, 3 coarse threaded bases, 3 fine threaded bases, 1 drill bit, 6 replacement vent caps, leak proof o-ring gasket

High quality high-density polyethylene material, free bending, lightweight, environmentally friendly, easy to carry, not easy to break, longer life, more durable

Update your Old Gas Cans and Water Jugs. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the spout to reach any direction.

As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

3 Gas Spout including Rubber Gasket. Spout Length: Approx. 8.25”. Spout Fits on most of the cans out there. Our Blitz Gas Can Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can safety Spout is the best way to stop fuel shortcomings.

UPDATE YOUR OLD GAS CANS & JUG. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE LONG REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents from spills by making it easy to bend and reach any direction.

As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

PACK OF 1 Gas Spout Kit including gas can gasket. Spout Length: Approx. 11”. Spout Fits on most of the cans out there. Our Gas Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout replacement is the best way to stop fuel shortcomings.

UPDATE YOUR OLD GAS CANS & JUG. This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. Let's hit the roads & transform your old can with this FLEXIBLE LONG REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents from spills by making it easy to bend and reach any direction.

As shown in the picture the internal thread size is 1.7in, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

PACK OF 3 Gas Spout Kit including gas can gasket. Spout Length: Approx. 11”. Spout Fits on most of the cans out there. Our Gas Spout Replacement allows the Fuel flows out smoothly without using any over-engineered anti-spill devices. Our 5 Gallon Gas Can Spout replacement is the best way to stop fuel shortcomings.

spout vent

flexible spout

2 New Packages of Scepter Spouts & Parts Kits

FITS PLASTIC SCEPTER, AMERI-CAN, EAGLE PG5 & KP SERIES, IGLOO, UNISTREAM, MOELLER, MIDWEST

DOES NOT FIT ANY JERRY CANS AS DENOTED ON PACKAGE

19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

Simple to install: 3 Bendable tubes，3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube，6 Vent Caps 1 drill Lid has Thick Rubber pad，Please feel free to contact us for installation problems, we will solve it for you as soon as possible

OEM Original Genuine Replacement Midwest Can Company Brand Screw Cap Collar.

Sold Individually New, Not in Retail Package. "CAP ONLY" - spout and can not included.

For use on the Midwest 1, 2, 5 and 6 gallon gas can model #'s 1100 1200 1210 2200 2300 2310 2600 5600 5610 5800 6600 7600 8500

Fuel can spouts are made of high strength ABS plastic, improved gasket more durable and no leak

Flexible nozzle can be bent to adjust various angles make gas/water easily flows out without the need for other devices and no more spilling

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

Fuel tank spouts are made of high strength ABS plastic, improved gasket more durable

Replacement gas can spout kit update your old cans instead of buying a new one

Push - in vent cap for faster and safer emptying, Lanyard for retaining the cap to prevent loss

【High Quality Cold-rolled Plate】: This Fuel Can is constructed with a premium cold rolled steel body and neat welded seal seams, which ensure its good durability and reliability.

【Lightweight & Convenient to Carry】: Each has a compact size 13.78" x 6.5" x 17.91" and only weighs 6.6 lbs when empty, which doesn?t take up too much space and is easy to store.

【High-quality】: Made out of premium steel material, leak proof, safety lock on spout, anti-corrosive, coating on inside and outside. Provide you with security assurance for EPA and CARB Approved.

EXTENDED SPOUT: This Spout Kit Can Be Used As An Extended Spout Where Length Of The Nozzle Really Matter So As To Access Hard To Reach Places Without Any Spill or Mess. It is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material .Let's hit the roads & transform your old can with this FLEXIBLE GAS SPOUT REPLACEMENT that can transfer fluids easily.

As shown in the picture the internal thread size is 1.7 inch, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing.

TWO GAS CAN CAPS: Black cap is fine coarse and used for older Briggs and Stratton, Rubbermaid, Essence, Blitz and Gott cans. Yellow cap is Coarse Thread and used for Midwest, Scepter and Chilton, Jerry can adapter. One of the great ways to transform your old gas cans with a new touch. There's no reason to put away the rusty cans when you have a 5 Gallon Gas Can Nozzle Replacement from Kool Products. This Flexible Gas Can Nozzle also has a smooth flow action manufactured excellently

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

QJIUBA gas can spout kits are made of high-quality HDPE materials. The tube can be bended freely without breaking.Thicker and wider rubber gasket makes it suitable for the bottle cap and prevent liquid leakage when refueling.

HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage

With this nozzle to pour the liquid, you will never spill gas all over yourself and your equipment again. And the stopper cap could be a spout cap for storaging or transporting the can.

The flexible design of spout makes it easier to pour gas. You can adjust the angle to pour gas into tank simply and easily.

These can spouts are made of high strength ABS plastic, which are bendable and durable.

This Spout Kit is made with prime HDPE (High Density Polyethylene) full of flexibility and unbreakable quality plastic material. No other spout kit in the market can beat this quality. Let's hit the roads & transform your old can with this FLEXIBLE REPLACEMENT GAS CAN SPOUT that can transfer fluids easily. Kool Products Gas Can Spout Replacement prevents you from spills by making it easy to bend the Gas spout to reach any direction.

As shown in the picture the internal thread size is 1.7 in, Suitable for most 1/2/5/10 gallon oil plastic cans. Please measure your oil tank mouth size before purchasing

Includes 8.70" Flexible long spout which is super flexible unlike other spouts available. Our Gas Can spout replacement old style helps get rid of inconveniences while travelling. Our Universal Gas Can Spout is providing our customers to make their transport safe & comfortable.