Best Tuxing Paintball Fill Stations in 2026

Simply select your rifle/pistol model and then the product required from the drop down listing.

Item including 2pcs extra o rings, stem OD that insert into magazine is 9 mm

This listing is for a replacement fill adaptor (or spare o rings) for Logun Rifles;Webley (Raider, Raider,FX2000 10 etc);Hatsan (All models);RWS (All PCP's except LR20 and LR25);Ripley (Most models);Prestige (All models);Evanix (All models with quick fill probe);FX Rifles;RWS Rifles;JKhan Rifles;Kral Rifles;AGS Rifles

Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug.

The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided.

Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve.

❦ USE IT SAFELY---The paintball Fill Station adapter is compatible with standard K valve, J valve and H valve. You can safely fill the compressed air in the diving tank with PCP air guns into paintball, HPA co2 tanks.

❦ EASY OPERATION---The DIN Valve Scuba Adapter is convenient and reliable design allow us to connect each fill adapter to the male air tool fittings simply, then your tank will be filled up quickly. Very suitable for outdoor use.

❦ PERFECT CONFIGURATION--The Yoke Fill Station is equipped with a 36-inch stainless steel braided fuel filler pipe for longer service life and 8mm standard female quick-disconnect coupling plug.

Universally Fit- The charging system extends the line from your tank to the re-fill station.It have 8mm quick release male plug and female socket on the end.

Stainless Steel Material Support High Pressure- The braided stainless steel adapter support 4500 psi high pressure with 60 inch length,and the surface is polished plating, very strong and beautiful.

Save Time on Refill-It can help you to save time and frustration at your next scenario/ big game, so that you don't have to strip to refill your tank.

3.5 Stage High Pressure Design and High Effency: With the exclusive 3.5 stage design by GX pump, it compresses the maximum amount of air possible from each smooth stroke. That means fewer strokes and less work to fill your air gun. You will also save more power comparing with traditional hand pumps. Test inflating result: Charging 500cc tank from 1000PSI-3000PSI, needs about 350 fills; 200cc Tank from 1000PSI-3000Psi.needs about 140 fills.

With Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. So you can feel free to inflate your scuba diving tank without moisture air. When the blue desiccant become red as enough water, you can pour them out for dring by referring to the user manual.

Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours.

Material - Made of high-quality Stainless steel, Size: 50.8mm / 2 inch Length, rated to 4000 PSI, max pressure: 4500 PSI, Temperature Resistance: 1000 ℃.

Quick Connect Adapter - Quick-Disconnect Plug with Air Filter, To filter the oil, moisture and impurities when your fill.

Accuracy - Use NC machining, accurately, suitable for 8mm female converter and M10X1 female thread, supplied with sealing ring washer, reliable and no leakage.

Perfect for remotes or CO2 fill stations

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector

Dual Heavy Duty 1/4 Turn Valves

Operating pressure is 300bar / 4500psi.

Compatible with max up to 5500 psi rated assembly.

36 inch long & 0.35 inch diameter heavy duty microbore hose.

More Labor-saving 3-stage PCP Hand Pump: Comparing with the other model GX-H4 , this pump adopts new design. You can save much energy in every stroke. It also means the same air tank should need more fills than H4 model. Test inflating fills: 500cc tank from 1000psi to 3000psi needs 420 fills; 200cc tank from 1000psi to 3000psi needs 180 fills.

Durable Quality and Durable Performance: With the high quality stainless steel pump body and rubber handle, wide and strong base plate, it can ensure more stable and long-lasting using life. It can bear over 15000 times of tear and wear. At the 200 bar pressure, you can continuously use the pump more than 2 hours.

External Oil-Moisture Filter : With the new filter design, it can filter above 90% of moisture. When the blue desiccant become red after absorbing enough water, you can pour them out for dring by referring to the user manual. Note: This filter can only use for pcp filling .we suggest you buy a new breathing filter if you inflate scuba diving tank.

【HIGH QUALITY MATERIAL】- The first grade pipe of the high pressure hand pump is made of stainless steel and the second grade pipe of the pcp air pump is made of aluminum-magnesium alloy which has the characteristic of high hardness and lightness. It can reduce friction when you pull the air hand pump.

【NEW DESIGN】- Compared with the traditional 3-stage hand pump pcp, the 4-stage airgun pcp pump has great advantages: it can save at least 25% of the force and lighter than a 3-stage pump. And it carries with various connectors, easy to use.

【EASY-TO-READ PARAMETER】- The pressure gauge is made of high quality stainless steel, the measure range of which is 0-6000Psi and working pressure is 0-4500Psi. Accurate display, explosion-proof pressure protection, safe and assured.

Material: Stainless steel, ​Rated to 4000 PSI,Max Pressure: 5000 PSI

Size:8mm 1/8 inch BSPP male thread

Type:Male thread quick disconnect plug with Sealing O-Ring

【Effortless and High Effency 】3 Stage Hand Pump , Compresses more air from each smooth stroke, Requires less effort than other pumps and easy to go to The final filling pressure when the pressure up to 2500 psi.

【Wide Application】 Come with 8mm wide use quick connector , This Hand pump can use for PCP pistols, rifles and the Airgun, paintball cylinders,scuba diving tank ,car tire,kayak

【Portable and Foldable】 With the foldable pedal and 2 kg Light weight , it was easy to store and transport , Carry it when you go for hunting trip , Make sure your favorite rifle is ready for action.

Scuba Refill Adapter with 36" quick disconnect filling whip hose.

Built for standard Scuba K-Valve, J-Valve and H-Valve.

Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks.

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector

Dual Heavy Duty 1/4 Turn Valves

Voltage：110v, Frequency：60Hz, Flow Rate：30L/min; 1cfm, Power：1500w. Working Pressure Service: Normally rated pressure 20Mpa/200bar/3000psi to Max 30Mpa/300bar/4500psi.

Motor Type: Single phase motor. Max Filling Volume: Less than 1 liter / 68 ci, Filling time: 0.5L container 0-30MPa about 5-10 minutes, 1L container 0-30Mpa about 15-20 minutes.

Pressure adjustment system with manual shutdown, comes with efficient and reliable safety valve, automatic leaking after full filling until turn it off, cooling way is circulating water cooling, the water tank and pump is separated, drain valve by hand.

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure

Max working pressure:4500psi with 6000psi burst disc,

Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling

【4500 PSI】It is suitable for compressed air tanks with rated assembly up to 3000psi-4500psi. It is not applicable to CO2 tanks.

【Durable】This supplemental hose is made of high quality stainless steel, durable. Suitable for most hand pumps, high quality replacement air pump hose in stock.

【Quick and Easy】Fill your undershirt easily! The fill whip extends the line from the tank to the refill station, so you can refill without removing the tank from your pack.

Heavy-duty unit. Screws onto any Paintball CO2 or Nitro tank and depresses the pin valve by screwing down the large knurled knob.

All metal construction. Can also be used with Remote Systems or Fill Stations.

Lightweight black anodized aluminum unit with female side hole threaded 1/8" NPT (accepts standard CO2 hose fittings)

★【Durable】Durable brass fittings. Easy to read pressure gauge.

★【Reliable】Inflators are designed for convenience and reliability.

★【Parameter】Outlet Thread: 8mm; Interface Type: 1/2 Quick Insertion; Measuring Range: 0-4500(PSI); 60cm Microbore Hose.

High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure.

Two Types of Threads -DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us.

Dual Gauge Design - gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose.

【 Quick Connctor 】: 8mm standard female quick-disconnect coupling plug, 0.5m spring soft hose.

【 Quick Bleed Relief Valve 】: With standard high pressure 8mm female quick-disconnect coupling plug.

【 Work with pcp rifle 】Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.

Supplied with spare O rings.Made by Stainless steel.

Supplied with compact sealed 40mpa/6000psi Gauge, Bleed Valve. *This is for HPA not CO2.

The DIN fitting(G5/8") will fit both 300 and 232 Bar diving cylinders.

Standard scuba yoke pocket, compatible with standard K-Valve, J-Valve and H-Valve ;Scuba Tank Station/Refill Adapter With standard high pressure 8mm female quick-disconnect adapter,Working pressure 20MPa, 3000psi,with maximum air pressure up to 4500psi

Comes with 36 inch length filling hose protective by Black resin hose with metal thread,easy to use - Simply connect each fill adapter to the male air tool fittings

Components are meticulous in workmanship, safe and stable in use.High hardness and strong corrosion resistance,Made of high quality aluminum and stainless steel. Newest double O-rings design for longer service life.

Wide Application: The paintball Co2 tank adapter is widely used for firefighting, dive stores, snorkeling systems and paintball tanks filling

Specifications: Universal CO2 refill adapter with 8mm quick plug and 3000PSI mini gauge, 1/8 inch NPT female side hole, bottom female thread G1/2-14 (0.825-14NGO), can be screwed together with other recessed pins on the valve

Function: The co2 refill adapter can release the air from the cylinder, check the air pressure, and is a good choice for remote systems or CO2 filling stations to release the air from the cylinder

STRONG PRESSURE RESISTANCE: The DIN Valve Scuba Adapter can resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure.

EASY USE AND QUICK RELEASE: It comes with an 8mm standard female quick-disconnect coupling plug, and it could be connected and quick released from other male fittings within seconds.

DUAL GAUGE DESIGN: A gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose, can extend the service life.

Unregulated Fill station

Self service style

Rugged and Durable

𝐄𝐍𝐃 𝐀𝐈𝐑 𝐀𝐍𝐗𝐈𝐄𝐓𝐘: This 350W HPA compressor from Creworks lets you take your air rifle or pistol into the field knowing they'll never run low; whether hunting, plinking, or competing, you'll be able to prefill PCP bottles using standard 110V outlets or refill your airgun on the go from any 12V car or truck battery thanks to the built-in transformer; and everything will fit neatly into any soft tackle or cooler bag

𝐄𝐍𝐃 𝐏𝐔𝐌𝐏 𝐅𝐀𝐓𝐈𝐆𝐔𝐄: This 12 L/min PCP air compressor will top off a Benjamin Marauder to 3000 psi in less than 2 minutes, fill your Air Venturi Avenger from 0 to 300 bars in about 5, and load a 48ci SCBA tank to 4500 psi in just 20 minutes... versus days with a high pressure hand pump; we do recommend 1 liter or 61 as the max size, though; for anything larger, be sure to watch the temp on the digital display, let the motor rest, and purge moisture as you go

𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄: The standard 8mm quick connect, sheathed fill whip, and automatic shutoff keep use safe and simple; unlike other home air compressors, there's no need to mess with oil, water, or coolants; and spare burst discs & other components come included if you push things a little too hard

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure

Max working pressure:4500psi with 6000psi burst disc,

Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling

Air bottle capacity: 3L/30CF, M18x1.5-6H screw thread size.

Working pressure: 30mpa / 300bar / 4500psi, hydrostatic test pressure: 50mpa, burst pressure: 102mpa.

The service life is 15 years (Inspection cycle: 3Yr), CE / EN certified, Not DOT certified ( Filling it by yourself ).