Best Paintball Valves in 2026

Standard SCUBA Yoke Adapter Pocket, compatible with standard K-Valve, J-Valve and H-Valve .

8mm standard female quick-disconnect coupling plug, 24 inch stainless steel spring protector hose.

Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.

❦ USE IT SAFELY---The paintball Fill Station adapter is compatible with standard K valve, J valve and H valve. You can safely fill the compressed air in the diving tank with PCP air guns into paintball, HPA co2 tanks.

❦ EASY OPERATION---The DIN Valve Scuba Adapter is convenient and reliable design allow us to connect each fill adapter to the male air tool fittings simply, then your tank will be filled up quickly. Very suitable for outdoor use.

❦ PERFECT CONFIGURATION--The Yoke Fill Station is equipped with a 36-inch stainless steel braided fuel filler pipe for longer service life and 8mm standard female quick-disconnect coupling plug.

Quick Bleed Relief Valve: With standard high pressure 8mm female quick-disconnect coupling plug.

The Yoke Fill Station: Come with 36 inch length filling hose, protective by stainless steel braided.

Perfect Fit: Fits for standard K-Valve, J-Valve and H-Valve.

CO2 Dual Valve Paintball Tank Refill Station for 12oz, 16oz, 20oz, 24oz. Tanks etc.

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector + Dual 1/4 Turn Valves

Max to 3000psi working pressure.

1/8 inch NPT female side hole threaded with 8mm quick plug and gauge

G1/2-14 ( 0.825-14NGO ) female bottom threaded, screws onto any depressed pin valves

Power: 110V 60Hz; Motor Power: 1.8KW; Charge pressure: 30MPa; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min; Oil standard: ISO VG 46 & AW 46. (Oil not included)

WIDE APPLICATION: A perfect electric air pump for car tires, bike tires, fire fighting, paintball, air pistols, leakage detecting, pressure-tight tests, automobiles, bicycles, air impermeability tests, pressure-proof tests, etc.

QUICK-FILL PERFORMANCE: It takes only 30 minutes to fill a 6.8L tank to 300BAR. Designed with two-stage compression and two water-oil separators for performance stability.

SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.

APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.

45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector

Dual Heavy Duty 1/4 Turn Valves

High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure.

Two Types of Threads - A DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us.

Dual Gauge Design - A gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose.

40 Inch Stainless Steel Dual Braided Hose

Heavy Duty Tank Connector

Dual Heavy Duty 1/4 Turn Valves

Scuba Refill Adapter with 36" quick disconnect filling whip hose.

Built for standard Scuba K-Valve, J-Valve and H-Valve.

Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks.

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure

Max working pressure:4500psi with 6000psi burst disc,

Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling

Easy to read pressure gauge

Inflation Valve Interface Type:1/2 Quick Insertion

Measuring Range:0-4500(PSI)

High Pressure Resistance - It could resist working pressure up to 20-30 Mpa / 200-300 Bar / 3000-4500 PSI, with a gauge to indicate the pressure.

Two Types of Threads -DIN valve has two types of external thread. Sizes: M18x1.5 & 5/8-18UNF. Please check your tank thread before purchasingif you do not know,please contact us.

Dual Gauge Design - gauge indicate tank pressure,the other gauge indicate the inline pressure. WIth 57 cm long stainless steel spring protection hose.

【 Quick Connctor 】: 8mm standard female quick-disconnect coupling plug, 0.5m spring soft hose.

【 Quick Bleed Relief Valve 】: With standard high pressure 8mm female quick-disconnect coupling plug.

【 Work with pcp rifle 】Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.

Capacity - 30 cubic feet cylinder

Working pressure - Max up to 4500 psi

Certification - Standard CE approved, EN standards, Not DOT ( Filling it by yourself ).

Dual gauge design:one gauge indicate tank pressure,the other gauge indicate the inline pressure

Max working pressure:4500psi with 6000psi burst disc,

Application:assembled in carbon fiber tank,suitable for pcp air gun or paintball tank refilling

【Specification】：With 45mm diameter glycerine filling gauge, 0~ 40mpa, max pressure 6000psi fill station designed for paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.

【Knob type exhaust valve design】：With knob type exhaust valve make the air outlet smoothly, which is safe to use operate and durable to use.

【Easy to read】：CGA347 female thread with valve gauge, paintball charging adapter inflators are easy to read pressure gauge ensure the convenience and reliability.

Dual gauge design:there are two gauges,one gauge indicate the tank pressure,the other indicate the filling pressure.You can always know the pressure in the tank and the pressure filled to your guns

Thread:M18x1.5,you can contact us if you do not know your tank thread

Max working pressure:4500psi,there is one burst disc rated for 6000psi,so if you over filled your tank,the burst disc will protect your tank

Integrated DIN valve male thread size is M18x1.5-6H, Working pressure: 20-30 Mpa / 200-300 Bar / 3000-4500 PSI.

High Pressure Hose: 57mm length stainless steel spring protector hose, 8mm dual quick-disconnect female converter.

Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.

Integrated DIN Valve: Male thread size is 7/8-14 UNF.

Working Pressure: 20-30 Mpa / 200-300 Bar / 3000-4500 PSI.

Dual Gauge Designed: One gauge indicates tank pressure, the other gauge indicates the inline pressure.

DIN valve male thread size is M18x1.5-6H , Max pressure: 40Mpa / 400Bar / 6000psi.

High Pressure Hose: 50mm length spring protector hose, 8mm female foster quick disconnect fittings.

Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.

DIN valve male thread size is M18*1.5-6H, Working pressure: 20-30Mpa / 200-300Bar / 3000-4500psi.

High Pressure Hose: 57mm length stainless steel spring protector hose, 8mm female foster quick disconnect fittings.

Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.

carbon fiber

Product Specification: 2L / 20 CF capacity, 30mpa / 4500psi service pressure, CE certified （Not DOT certified）, M18x1.5 screw thread size, integrated air filling system with regulator gauge hose fittings for input and output by quick disconnect.

Product Structure: Using high-quality raw material AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance.

Product Capacity: 3 liters / 30Cu ft capacity, Product Neck Thread: M18x1.5-6H thread.

Product Pressure: 30mpa / 300bar / 4500psi working pressure, 50Mpa hydrostatic test pressure, 102Mpa minimum burst pressure

Product Structure: Using high-quality raw material AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance.

【APPLY】： The paintball Fill Station adapter is compatible with the standard K, J, and H valves. You can safely fill the compressed air in the scuba tanks with PCP air paintball, and HPA tanks.

【CONFIGURATION】：The Yoke Fill Station length 24-inch, use an 8mm standard female quick-disconnect coupling plug. Components are meticulous in workmanship, safe, and stable in use. High hardness and strong corrosion resistance, Made of high-quality aluminum and stainless steel. Newest double O-rings design for longer service life.

【CREATIVE DESIGN】：The traditional screw pressure relief method has been changed, and a more advanced pressure relief method has been adopted, which is safer and more portable. After closing the valve, you only need to press lightly to complete the air release.