Best Patio Heater Replacement Parts in 2026

【GLASS TUBE FOR PATIO HEATER】This Quartz glass tube is a perfect replacement part for a four-sided Pyramid Flame Heater. You can fit this 49.5" long tube into any standard Pyramid Heater to get it back to full working order. This patio heater replacement glass tube doesn't fit with three-sided heaters.

【EASY INSTALLATION】Our Pyramid patio heater parts are easy to install, with a special black rubber connecting ring included for attachments, so getting your outdoor space back up and running should be no trouble. Once installed this propane heater glass tube replacement should last a long time. It only takes one minute for a person to replace , refer to the video.

【 HIGH TEMPERATURE RESISTANCE】This heater glass tube replacement piece is made from strong and heat-resistant Quartz glass. This makes the glass hard to damage and helps it maintain a good condition during combustion, even in poor weather conditions. Outdoor heater replacement parts have to be able to handle heat!

【Overview】Superior 1-PC Quartz Glass Tube, 49.5" tall ø4" in diameter Table Top Patio Heater Glass Tube Replacement; Include Rubber Ring; Fits the majority of all 4-Sided Pyramid Style Heaters around 87" height (Does NOT fit 3-Sided/triangle models around 91" height); this glass tube fits below listed items but not limited to. Please check your heater measurement

【Fits for】fire sense, az patio heaters, garden radiance, well traveled living, gardensun/wellife, golden flame, prime glo, hiland & costco models 61220 & 61221, napolean, xtremepower USA, giantex, thermo tiki heaters, ambiance

【Reference Part number】Patio heater Outdoor Heater Fits: HLDS01-GTHG, HLDS01-GTSS heaters Reference Part number: 584736, 639564, PH08-SB, HLDS01-GTHG, HLDS01-GTSS, HLDS01-GTPC

PREMIUM QUALITY REPLACEMENT PARTS - Manufactured with high-quality materials that exceed OEM standards. The dump switch is made of heavy-duty ABS plastic while the thermocouple components are made of high-standard red copper and brass. Easy to install and use, this replacement kit will allow you to enjoy your space without worrying about your safety.

GUARANTEED PROPER FIT - Our replacement parts are highly compatible with different models of propane gas heaters including propane patio heaters, indoor room gas heaters, and thermoelectric gas heaters.

UNIVERSAL M8*1 THREAD THERMOCOUPLE - The patio heater thermocouple wire has a full extension length of 350mm with temperature resistance sleeves. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves.

Dimension - Probe is not threaded. The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Note: Check your lead lengths before purchasing.

Purpose - This patio heater parts is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly.

Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc.

Well Made & Safer: The thermocouple is made of brass and red copper and the anti-tilt switch, is made of ABS, which will automatically stop heating when the gas heater is tilted

Wide Compatibility: The patio heater thermocouple replacement is suitable for most propane heaters, patio heaters, and other gas heaters with thermoelectric safety

Dimension: The total length of the thermocouple is 350mm, the thermocouple probe is M6*0.75 and the threaded end is M8*1, please measure your original parts before ordering. The weak current FD4 dump switch is for gas R≤10 mΩ

Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread,Certification No.: 70108069

Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000)

Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm

Connects from the main control valve to supply the pilot flame

Round orifice included

Length: 4" Long

Comes with regulator

Mounting hardware not included

Will fit Home Depot model: SS-GT BFC-A-SS. Please check burner mounting configuration before purchasing

Fits Mr Heater: MH15T, MH15TS, MH30T, MH30TS, MH45T

Fits SunRite: SRC15T, SRC30T

Replaces part #17425

🔶Material: The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.

🔶Application: Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater

🔶Size: Thermocouple Length: 600mm/23.62inch; Head Tip: M8; Knob Diameter 44mm; "D" Insert for Valve: 6.0-6.1mm

Propane gas patio heater dump switch type thermocouple end nuts for valve M8*1

Two terminals connect dump switch on the patio heaters

Thermocouple tip thread M6x0.75 universal type (Can adjust height easily by nuts)

Length: 900mm/410mm including two/five nuts

Head size:M6X0.75

End connection:M8X1/M9X1 ---,--- Voltage: >20mV

WIDE COMPATIBILITY --- The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY.

EASY INSTALLATION --- This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container.

PREMIUM QUALITY --- The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use.

Complete burner for tall patio heaters with 2 1/2" Pole

Piezo striker. Sheild mounting hardware not included;Emmitter Screen 3 post

Main control valve. Pre-attached 5' Hose and Regulator

Length of Thermocoupler 600mm Head Tip M8*1 (This is Low pressure control valve max rating BTU 50000);When installing, make sure that the installation position of each part is accurate, incorrect installation can lead to unusable, especially thermocouples.

Low Working Pressure Max 1/2 PSI（65mbar）, CE&CSA tested Main Control Valve In & Out with 3/8" Male Flare thread

Platic Black Bakelite Knob Diameter 38mm and "D" Insert for Valve 6.0-6.1mm

COMPATIBILITY: The thermocouple for gas patio heater is suitable for BBQ grill, fire pit, fireplace, heater hose connection.

EASY INSTALLATION: You only need less than 5S to open valve.

PREMIUM QUALITY: High standard solid copper and brass material, firm construction for durability and longevity.

APPLICATION: This 350 mm thermcouple is suitable for patio heater.

PREMIUM QUALITY: High standard solid copper and brass material, high temperature resistance protection sleeve.

EASY INSTALLATION: You only need less than 10s to open the valve and don't need special tools for it.

Requires a 20A circuit(Connect 20A adapter or breaker),with 1.5" outlet , min 0.35MPA pressure,suggest work with at least 0.25HP,suitable small bathtub & spa tub /hot tub 2 KW /110V-120V.

Pls put hot water instead of cold water in the hot tub,we suggest water capacity not more than 400 US gallon,in addition,you need an insulation cover to maintain the temperature,or it will take long time even will not be able to catch up.

Adjustable thermostat from 0 - 45 ℃, when the water temperature reaches the set temperature,it will stop automatically. when temperature is dropped down, it will heat up water until your set temperature.

🔥【Fire Pit】Thermocouple for gas fireplace. Kit includes 1 Thermocouple and 2 Fixings. Length:35 inch, Head thread size: M8*1, End Nut size to connect valve: M8*1

🔥【High Quality】Made with only the highest quality of materials. Temperature range: -110°F ~1200°F. Works for both LP and natural gas applications

🔥【Widely Used】 Fire pit thermocouple universal used for gas fireplace, fire pit, grill, stove, catering cooker, patio heaters, natural gas furnace, fire sense patio heater thermocouple replacement etc

Inlet valve thread M10*1, outlet thread 7/16", Pilot thread M8*1

Main control valve with inlet, outlet & Pilot with safety

Application: Room heater space heater oxygen Protection Device

Fits 50 gallon 40,000 BTU tall natural gas model #BFG 50T40 only

Can also be used on equivalent American & U.S. Craftmaster brands Series 100 units.

> [COMPATIBLE]: Inlet Thread: Female M10*1 (0.394"), Outlet Thread: 7/16”-24UNF Thread （0.429" ), Turn-ON Gas valve with 8mm Spindle Shaft, Pilot Burner Connection Thread: M8*1 ( The valve is for low pressure only). Control Valve and Thermo Coupler Suitable for Propane gas heaters with Thermoelectric Safety, Work with outdoor propane patio heater, standing patio heater, tower glass tube heaters, table propane heater, Hampton bay patio heater. Not suitable for use with Natural Gas heaters.

> [SPECIAL DESIGN]: Thermo coupler design for Propane Gas heaters Outdoor heaters Gold plated, connectors inside. Thermocouple and switch are used to solve the problem that the indicator light is not on. Control Valve recommend having thread tape in order to make sure there are no leaks

> [USE ADVICE]: If your original thermocouple has a threaded body and is fixed to the heater by a pair of nuts. The product has a smooth (unthreaded) body that is tapered with a notch at the bottom to be pressed into the mounting hole and the notch holds it in place. If not suitable for your mounting hole; Use a bit of drill bit to enlarge the hole and let it slide in. A small amount of heat-resistant epoxy resin can be used to help stabilize.

PREMIUM QUALITY REPLACEMENT PARTS - Manufactured with high-quality materials that exceed OEM standards. The dump switch is made of heavy-duty ABS plastic while the thermocouple components are made of high-standard red copper and brass. Easy to install and use, this replacement kit will allow you to enjoy your space without worrying about your safety.

GUARANTEED PROPER FIT - Our replacement parts are highly compatible with different models of propane gas heaters including propane patio heaters, indoor room gas heaters, and thermoelectric gas heaters.

UNIVERSAL M8*1 THREAD THERMOCOUPLE - The patio heater thermocouple wire has a full extension length of 350mm with temperature resistance sleeves. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves.

This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken.

The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure.

Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch.

Propane Tank Top Heater Replacement Parts Safety Faston Type Thermocouple Safety Assembly Kit with FD4 Dump Switch Is a Repair Replacement Part for Most Tank Top Propane Heater like Mr Heater, Dura Heat, COSTWAY, REMINGTON,ProCom etc

Fits prpane tank top heater for most brand like Mr Heater, Dura Heat, COSTWAY, REMINGTON,ProCom and other most tank top heater with white faston female plug of valve Thermocouple is a replacement sensor for heaters the head need to be heated always

Thermocoupler length 20inches with one FD4 weak current tilt dump switch gas R≤10 mΩ;Thermocoupler set includes two parts with white faston type terminal connect with tank top propane heater valve.

[FITMENT] Thermocouple replacement for most brand of tank top heater like Mr Heater, Dura Heat, COSTWAY, REMINGTON, ProCom etc. (Not suitable for Texsport heater or similar main control valve).

[REPLACE PART NUMBER] 2304885 Thermocouple Replacement of Mr heater thermocouple model and work for the propane tank top heater. When the heater won't light up, you need to replace it with a thermocouple ( some times the problem is the gas valve defective so you need replace valve).

【COMPATIBILITY】Compatible with Mr. Heater MH15T, MH15TS, MH30T, MH30TS, MH45T. Compatible with Sunrite SRC15T, SRC30T. Compatible with GHP RMC-FA50/C/L RMC-FA60/L/L-01 RMC-FA100/C/L RMC-FA125/L/L-01. Compatible with other model FA40DGD, FA40DGP, FA40DGP-01, FA50DGD, FA50DGP, FA50DGP-01, FA60DGD, FA60DGP, FA60DGP-01, FA100DGD, FA100DGP, FA100DGP-01, FA125DGD, LPFA125DGD, FA125DGP, FA125DGP-01, FA150DGD, FA150DGP, FA150DGP-01.

Universal thermocouple, thread M8 x 1, total extension length 350mm.

Weak current tile dump switch is for gas R≤10 mΩ. Notice: Check if it fits your heater before ordering.

This kit with safety tipping switch, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, it will put your safety on first.

Pre-drilled holes

Will NOT fit 4-sided (square) glass tube heater

Will also fit Glass Tube Heater sold by Home Depot SS-GT BFC-A-SS

>[SIZE]---The safety copper valve shift "D" is 8mm x 6mm and the length is 14.5mm, compatible with many knobs. Control valve in & out thread is 7/16"-24 UNEF, Thermocouple valve thread is M8*1.

>[PREMIUM MATERIALS]---Gas control valve kits are made of brass with heavy-duty construction for rugged durability, strict quality control standards to build and test, and snap easily into place. Non-OEM but meets OEM standards.

>[APPLICATION]---This gas safety control valve with integrated igniter is used to repair and replacement for old propane gas and natural gas main control valves of Garden Sun gas heaters. Max BTU rating: 50000 ,working pressure 65 mbar.

【Premium Dump Switch】This safety thermocouple and tilt switch can stop the heater and prevent gas leakage when the heater tilted or dropped.Protect your safety.

【Solve Problems】Solve problems that the pilot light or flame NOT stay lit, or thermocouple is broken.

【Suits Most Patio Heater】Suitable for propane gas heaters with thermoelectric safety,works with most outdoor standing patio heater, frie sense heater, pyramid-style tower heater, Hampton Bay heater, Lowes Patio heater. Please confirm the compatibility before buy.