Best Metal Phone Mounts in 2026

ADJUSTABLE WIDTH - Compatible With Most Mobile Phones, GPS, you can adjust the width from 50mm to 100mm to fit the cell phone.Can hold 4 to 7 inch phones

MORE STRONG - Aluminium Alloy Material with Sponge,The metal phone mount will hold your cell phone tightly on the bicycle，the Sponge also protect your cell phone.

NEW DESIGN - This Bike Phone Mount does not obscure the screen ,Perfect for almost all large screen phones. eg iPhone 11/ iPhone 11 Pro MAX/ iphone x/Xr/xs,Huawei Mate 20 pro, samsung Galaxy S20 S20+ S10+, Note10 Note9 8 7 full screen or all screen phone

Phone Holder Adhesive Patch Backing: Red multi-use 8 PACK Smaller 2 sides VHB 3m replace sticky adhesive glue part works for hands free car dash holder, finger holder, phone ring holder, plastic mount, dashcam, ball mount, grip holder back & magnetic cell phone car mount base for applications. Tiny long-lasting adhesive replacement kit re-stick magnets wall mount & magnetic mount. With multiple adhesive strips cell phone holder, you position the android on a flat surface in the dashboard or van.

Super Strong Circular 3M Sticky Adhesive Dots: Extra strong 2 PACK both sides larger adhesive replacement foam thin sheet work perfectly for collapsible grip & switchable tops socket. Withstand heat resistant on hot climate car mount replacement stickies parts, no need to buy re-stickable gps grip mount or dash cam. Heat resistant vhb 3M double sided adhesive sticky pads art for custom swappable expanding stand. Use heat tolerance adhesive pads sticky notes to reattach it.

Replaceable Alcohol Pads Extra: Clean the chosen area to place your smartphone. Make sure the mounting surface and base of mount adhesive mat tags clear cleaned completely before attaching to affix and secure a new blanks 3M adhesive stickers backers for carmount or shower caddy or USB splitter even motorcycle helmet. For the ultra thin 2 sided 3M adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.

Universal Phone Holder With Mount - This universal cell phone mount will securely fit any smart phone up to 3.75 inches wide! Holds iPhone 12, iPhone 12 Max Pro, iPhone 11, iPhone X, iPhone XR, iPhone 8 | 8Plus, iPhone 7 | 7 Plus, iPhone 6 | 6s | 6 Plus. Samsung Galaxy S10 | Galaxy S9, Galaxy S8

Easy Attaching - Mounts to any bike, boat, car, motorcycle, golf cart, shopping cart or stroller. Adjustable mounting clamp attaches up to 2 inches in diameter. No tools for installation required

Extra Secure and Shock Absorbing - rubberized clip with silicone belts grip phone firmly and securely. It holds tight, make the most extreme or casual ride - the phone will not fall

OUT AND OUT UNIVERSAL - we mean it, mount any phone to any bike or motorcycle with tubular handlebars! Holder fits any device up to 3.7" wide and fits all handlebars from 0.2" to 1.6" in diameter. No tools for installation required.

ADJUSTABLE GRIP WITH 360° ROTATION FREEDOM - simply adjust and secure your phone to any angle and position that suits your preference and enjoy the comfort of your ride!

EXTRA SECURE & SHOCK ABSORBING rubberized clip with silicone belts grip device firmly and securely. The bands wrap four corners of cellphone of any size even when in lifeproof case. Yeah, they hold tight, make your most extreme race to make the phone fell out, be sure it won't!

OUT AND OUT UNIVERSAL - mount any cell phone to any bicycle, motorcycle or ATV with tubular handlebars (from 0.2" to 1.9" in diameter)! No tools for installation required.

EXTRA SECURE & SHOCK ABSORBING rubberized clip with silicone belts grip phone firmly and securely. It holds tight, make the most extreme ride - the phone will not fall!

ADJUSTABLE GRIP WITH 360° ROTATION FREEDOM - simply adjust and secure your phone to any angle and position that suits your preference and enjoy the comfort of your ride!

✅ VERY EASY TO INSTALL- installs in seconds with universal fit. The SL-30 sets a new standard with solid construction and strong mounting clip for stroller, bicycle, golf cart, shopping cart, stationary bike and more!

✅ SIMPLE, ACCESSIBLE and SECURE- phone is at your fingertips at all times. FULL 360 degree rotation. Listen to your favorite music, use GPS, look at social media, and never miss a phone call or text.

✅ MORE FEATURES- Anti-shake sturdy clamp attaches to any mount up to 1-1/2". Flexible silicone bands and strong springs in the side rails secure your expensive phone. Rails expand to almost 4 inches. Works with Apple iPhone, Samsung Galaxy or Note, Google Pixel, LG, HTC, Moto, nearly all phones!

ULTRA SECURITY: this phone mount x web grip strap security bands made of strong silicone, it will grip your phone and device firmly, never let your phone to fall out from the mount, safer and more reliable when riding at high speed.

WIDE APPLICATION: this phone mount x web grip strap security bands is flexible to hold phones up to 5.5" including case.

UNIVERSAL COMPATIBILITY: this phone mount x web grip strap security bands fits for most motorcycle phone mount, bike phone mount and most mountain & road sports bicycle handlebar cradle.

BUY WITH CONFIDENCE! - High grade aircraft aluminum and strong metal components. The perfect strength magnet to hold your cellular device securely! Full instructional booklet included so you won't have any problems installing the magnetic car holder! Compatible with any smartphone and tablet

PATENTED MOVABLE DOUBLE PIVOTING DESIGN - This handsfree magnetic-mount is the world’s first anywhere dual magnetic phone holder. Tablets? Not a problem. Clutch mount can support any device up to two pounds not just mobile smartphones or tablets to any desired area. Flexible, Bendable, Portable, Adjustable, Rotating, Handsfree. No More Selfie-stick

THE PERFECT SOCIAL MEDIA COMPANION - Whether streaming, vlogging, makeup tutorials on your vanity mirror to hands-free webcam commentary, there is no limit to how you can Clutchit. No digging it out of your pocket or purse or dropping it on the car floor. Strongest Sturdy construction and quality magnetic power keeps your phone where you want it! The Clutchit phone mount design is superior to any other cradle holders on the market

▶ The B size 1'' ball double socket arm made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integral molding, solid structure. Anodized surface treatment, smooth surface, durable.

▶ With anti-theft knob design. Package come with a special wrench to adjust this secure knob. This design prevents the device attached to the double socket arm from being easily removed. Provides extra security for your device. The secure knob of double socket arm made of PA66+GF30% material.

▶ Short Arm: Overall length 2.48 inch (63mm).

【The Latest Design】The latest exclusive design quickly lock and release switch bicycle phone mount. Achieve quick installation and uninstallation of mobile phones. The simple design brings you a different using experience.

【Safe and Firm】Visnfa motorcycle phone holder made of ABS plastic, light and durable, sturdy and shockproof. Keeps stable no matter on the highway or bumpy mountain road. The built-in rubber pads on the arm protect your phone from scratches.

【Full Access】The clever open design of the bicycle phone holder allows full access to the phone screen controls and all buttons without blocking your face ID and fingerprint ID. 360°free rotation, you can use the mobile phone GPS function at any time. Never block the camera, enjoy shooting and recording your travel moments.

【One-Hand Operation & Anti-Thief Lock】one-click to lock your phone tightly instantly, the motorcycle phone holder makes sure the mobile secure even on bumpy roads; pushing the retractable modules on two sides to extend the clamping feet, people can take out the phone in one second. SIMPLY ONE-HAND OPERATION!; the special anti-thief lock design dispels your worries about leaving it outside. The handlebar phone mount makes operation super easy during ride, prevents being stolen when not in using.

【Double Socket Arms with 1" Balls】the unique double socket arms of handlebar mount desgin is with two 1 inch balls which is compatible with RAM MOUNTS or other bicycle phone holders with 1" sockets. It provides customers free choices to combine the handlebar mount base with other brands phone mounts.

【Aluminium Handlebar Base for Super Sturdy】made from aluminium alloy handlebar mount base, stainless steel clamping arms, the bike phone mount makes sure the phone stable and the mount sturdy on the motorcycles. NEVER BREAK OR SHAKE!

The Claw have been lengthened, Now length is 18mm Perfect Compatible with all Phones with Thick case Compatible with OtterBox, Compatible with Lifeproof Case,even some 4 to 7 inch phone Power Bank

Compatible With Most Mobile Phones, The width can be adjusted 50mm to 100mm(3.9 inch), which makes it suitable for almost all phones on the market ranging from 4 inch to 7 inch.

All aluminium alloy frame makes it the strongest and most secure phone mount on the market. The Four Edges are designed with Eagle Claws,which make your mobile phone to be much better protected. The cross-shaped structure makes it fit the pedestal perfectly.

OUT AND OUT UNIVERSAL - mount any cell phone to any bicycle, motorcycle, scooter or ATV with tubular handlebars (from 0.5" to 1.7" in diameter)! No tools for installation required. Works with cases and Popsockets

RELIABLE & SHOCK ABSORBING - extra secure rubber sling reduces road vibrations and firmly holds your phone while keeping its sensors, ports, and buttons unobstructed

360° ROTATION AND TILT FREEDOM - simply adjust and secure your phone to any angle and position that suits your preference and enjoy the comfort of your ride!

✈FULLY PROTECT YOUR PHONE - Motorcycle phone mount is made of high quality alloy, much more durable and solid than plastic. The tension knob on the holder can tighten your phone well, and silicone mat protect it from sliding and scratching, you don't worry the bumpy road would make your phone drop, 100% insure against any accidents or loss.

✈WON'T BLOCK SCREEN OR BUTTON - Not same as other bike phone mount, it make sure full access to your phone operation interface, barrier free to use mic, fingerprint recognition or other sensor, convenient for listening music, navigation, answering the phone while you 're cycling!

✈360 DEGREES ROTATING - The cell phone mount for bike support vertical or horizontal viewing, keep the best angle, make your phone is within reach at all times. Must tighten the nut on your phone holder once you have finished adjusted to make sure the security of your phone.

WORKS WITH ALL INDUSTRY STANDARD 1-INCH MOUNTS: Commonly used as an additional holding option for with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms. Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms.

COMPATIBILITY: Works with all Smartphones and gaming devices ranging from 2 inches to 4 inches wide. Some examples of these devices are: Smartphones- Apple iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8 and 8 Plus, iPhone 7 and 7 Plus, iPhone 6S and 6S Plus, Samsung Galaxy S9, S8, and S7, Galaxy Note 9, Note 8

FUNCTIONALITY: Moto-Vise holder has a strong and sturdy Spring-loaded grip, designed to hold your device in the most rugged conditions. With the secure grip, this mount can be used with motorcycles, bikes, and off-road vehicles. We recommend using two hands to insert and remove the device from the holder, this insures that your device will not be accidentally removed when adjusting the viewing angle.

📱[DURABLE & SAFETY]: ROCKBROS bicycle phone holder is made of CNC anodized aluminum alloy. rock solid, lightweight and resistant to oxidation. Unique five-corner design❗can hold your smartphones on the phone mount securely and firmly

📱[UNIVERSAL FIT]: The width of cell phone holder can be adjusted from 55mm/2.16" to 100mm/3.93", works for smartphones between 4.2"~6.8". Compatible with iPhone 12, 12 Mini, 12 Pro Max, 11 Pro, 11 Pro Max Xs X 8 8P 7 7P 6S 6P, Huawei Mate 20 pro, Samsung S10 S9 S8 and etc.

📱[CAMERA FRIENDLY]: Our phone holder for bike comes with silicone pads that keep your phone from scratches and vibration. The motorcycle phone mount adopts half enclosure design, doesn't block the phone's camera❗Support photo shooting and video recording in cycling.

ENDLESS MOUNTING OPTIONS: Bike, Golf Cart, Stroller, Table, Desk, Shelve, Air Vent, Steering Wheel

UNIVERSAL FIT FOR CELL PHONES AND GPS: Flexible grasp securely holds most phones and GPS devices including iPhone, Google Nexus, Samsung, LG, Sony, Garmin, HTC, Tom-Tom

360 DEGREE ROTATION: Easily adjust the angle of your phone while mounted.

【Usage Occasions】The Pellking phone chest mount suits for skiing,fishing,biking,motorcycle,Hands-Free for commentary on the video.we aren't suggest use it shooting video when jumping and running,When you turn on the “anti-shake” function of your phone, the effect of shooting video will be better.

【Great Choice for POV/VLOG】The phone can be placed horizontally and vertically,The design of J-Hook and long screw can make the phone rotate 90°, The size of this strap is easily adjustable,fit over even the largest winter jackets,fit to wide range body size.

【Stable Structure】There are two non-slip rubber pads at the bottom and top of the phone holder;When you use the mini wrench provided to fasten the long screw to the J-hook mount,The mobile phone clip will be in accordance with your adjusted angle, stable shooting, will not slide.

【 Fit for 5.5"-6.8" Phones】This waterproof motorcycle phone mount with wireless and USB charge function is specially for 5.5"-6.8" large phones! Please find the other variant for smaller size mobiles.

【Unique highlight】Designed with secure knob lock and key, it avoids the motorcycle phone holder being lost while leaving it outside; mounting on handlebar with double socket arm, this handlebar phone mount allows 360°&360° free adjustment on height/angles.

【Charge by Wireless/ USB】This motorcycle wireless phone mount charger quickly charges cellphones by Qi wireless/USB C 3.0 when being wired to 12/24V motorcycles; besides, the handlebar phone holder can also get power by plugging USB C to other USB A sockets--then wireless charges for your mobiles alone! (Note: you'll need a USB C-USB C cable when charges your phone by USB C; and a USB C-USB A cable when plugging the item to USB A ports.)

🚵‍♀️【Ultra-Stable & Safe】Made of tough and stretchy premium silicone to resist strong vibration and impact. The silicone bike phone mount catches your phone firmly without scratching phone screen. Anti-slip rubber grooved clip ensures phone mount is securely attached to the handlebars and keeps your cellphone safe even on a bumpy rocky road.

🤳【Flexible Rotation】Freely adjust your phone to any angle that suits your preference, providing you with ultimate flexibility in viewing your phone and keeping track of mileage, time or maps during riding.

👋【Simple Operation】Easy to install or remove in a few seconds. No screws and no tools to be securely mounted on any handlebar. Adjust the silicone bands arbitrarily for easy fingerprint or face unlocking of the phone.

The Shock Absorber is made of aluminum alloy and hard anodized , which can guarantee your use for different environments.

When you install a mobile phone clip with Shock Absorber on the vehicle when driving or starting, it can reduce the impact on your device caused by road bumps and engine vibration, and better protect your device,Suitable for motorcycles, bicycles, UTV/ATV, cars and other means of transportation.

The distance between the center mounting holes is 15mm,Suitable for FANAUE CPC-07 CPC-08 mobile phone clip,The distance between the mounting holes on both sides is 48mm,Applicable to RAM products and other equipment with suitable installation hole distance.

Mount fits on handlebars measuring 21.68mm up to 30mm in diameter

Mount holder fits phones up to 4 inches wide including iPhone 12

Spacer rings included to ensure best fit

Bicycle Head Stem Mount with 1" Ball for 1 1/8" Star Washer bike stems.

Strong secure mounting base. Machined from solid billet aluminum. British made. Fits 1 1/8" Star Washer Stems only - not suitable for Quill Stems. Fitting - Tighten to manufactures torque setting

1" ball base is compatible with RAM motorcycle mounts, SW-Motech and Ultimate Addons mount accessories.

Replaces, upgrades, or adds to an existing mounting pedestal and is compatible with Arkon smartphone and tablet holders

Mount fits on handlebars measuring up to 31.75mm or 1.25 inches in diameter

2 year limited warranty

Dedicated bike handlebar mount with clip-in cradle for the Samsung Galaxy Note II / Note 2 smart phone - suitable for motorcycles and bicycles / cycles.

Bespoke clip-in phone holder designed to only fit the Galaxy Note 2 - for use without any additional case / skin.

Light weight and easy to secure using a twin screw fixing - fits handlebars 16-32mm (0.6"-1.27") in diameter.

UNIVERSAL PHONE MOUNT SIZE: Designed to fit any smart phone up to 3.5" wide. Mounts to any bicycle and motorcycle handlebar with a .63-1.06 inch diameter **Please note that this does not fit all bicycle handlebars, measure the size of your handlebars to ensure it will fit before purchasing**. Phones it holds are those that are 2.3-3.5 inches wide with the case. Apple iPhone 6/6s, iPhone 5s, iPhone 5c Samsung Galaxy S6, Galaxy S5, S4, Google Nexus, HTC, Edge S5 Edge S4 Edge S3 and much more!

STRONG & SECURE: Our adjustable arms and silicone band holds your phone firmly in place.

UNCLIP & GO: Take your phone out quick and with ease so you won't miss any phone calls.

Fit all Smartphone from 4.3" to 5.7" Viewing Screen (Inner Case Measures 5.75"x3.5"x0.85")

Touchscreen Compatible Case utilize a Slide N Lock on to Base Bike Mount Design for easy install and 360 Swivel viewing adjustment (landscape or portrait viewing)

Bike Mount has an easy pull to lock design w/enhanced security belt (Compatible with bar up to 1.75" Thick)

Dedicated Sony Xperia Z2 smartphone holder / cradle supplied with a motorcycle fork stem yoke mount. Fork Stem Yoke Mount fits hole diameter 17.5-20.5mm (0.68"-0.81").

Developed for use on bikes where a handlebar mounting option is not possible or desirable. Designed to fit sports, superbike, endurance and touring motorbikes using the cylindrical bore wall (steering head tube) of the fork stems.

Light-weight, made from Aluminium. Attaches easily to the steering head tube of fork stems. IMPORTANT: First check that your stem cover can be removed leaving a central hole for the mount to fix in.

German made IPX4 waterproof phone case fits the Samsung Galaxy S4 mobile smartphone.

Supplied with the BuyBits 1" ball adaptor which fits Ram, Ultimate Addons & SW-Motech motorcycle mounts. (mount not included)

Hard shell design protects your phone from light rain / snow showers & water splashes. (not submergible)

STURDY AND SAFE:A special shape of this motorbike phone holder grips each corner of your phone tightly. It ensures the safety of your cell phone attached to your bike handlebars even on a bumpy road.Package List:1 x bicycle mobile phone navigation bracket, 1 x base.Note:without screws.

FREE YOUR HANDS:To ride a bike safely, you can free your hands while riding.Easily attach it to handlebars, carry your phone with you, and use it outdoors or indoors.

EASILY ROTATABLE:360 degree rotating support holder, can provide you the best viewing angle, and hold your phone vertically or sideways firmly and securely, Simply adjust and have your phone to any angle and position that suits your preference and enjoy the comfort of your cycling on the bike.