Best Godox Photographic Lighting Remote Triggers in 2025

ONLY Compatible with Canon Cameras：||There is a film on the product screen, if you see small traces like scratches on the product screen, it is normal to exist. If you still have problems, you can contact me by email, I will actively follow up and solve your problem.

🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

🌿 |SMART TCM BUTTON|: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode

Compatible with Godox X1T-C transmitter.

Support GR group flash, max.5 groups & 32 channels.

2.4G wireless transmission, operating distance can reach up to 100 meters.

Godox XProC TTL Wireless Flash Transmitter can not only control the flashes with built-in Godox wireless X system e.g.camera flashes, outdoor flashes and studio flashes, but also can control the Canon original flashes when using in combination with X1R-C receiver.

This flash trigger can be used on the following Canon EOS series camera models:1Dx mark II,1Dx,5Ds/5Dsr,5DIV,5D Mark III,5D Mark II,5D,7D Mark II 7D 6D 80D,70D,60D,50D,500D 450D,400D Digital,350D DIGITAL,100D,1200D,1000D,1100D,M5,M3 etc.

Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode

This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously

Easy installation, low power consumption

No any damage to camera

🌿 |Built-in Bluetooth for APP Control|: You Can Connect the X2T-C to Your Phone or Tablet via Bluetooth after Download the "GodoxPhoto" APP, Then control the Flash Mode, Power Output, the Modeling Light Mode, the Beep of Godox Flashes, and etc. It is Extremely Useful When Doing Product Photography in the Studio While the Radio Trigger is Hard to Reach on the Top of the Camera

🌿 |TTL Autoflash and Pro Functions|: Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, Scan setting, One-shot and Multi-shot setting, Control of the Modeling Lamp, Adjusting All Groups' Output Value Simultaneously, ect.

🌿|New User Interface, Easy to Operate|: LCD with Clear Display Effect, With 5 Group Setting Buttons, and 3 Function Buttons to Realize Quick Setting. Relocated Control-Wheel. New Hotshoe Locking Mechanism. New AF Assist Light that Uses Visible Light Instead of A Red/Infrared Pattern. USB-C Connection that is More up to Date and More Reliable than A MicroUSB

🎄🎄🎄【The Godox Advantage】Godox, since 1993, is a high-tech manufacturer specializing in lighting and audio equipment. Godox has been committed to providing consumers with professional and high-quality: Camera Flash; Continuous Light; Audio; Monitor; Light Shaper, and Photography Accessories. etc. It enables more people to enjoy the fun of light shaping. Godox Flash Trigger Make every whim and desire there is a direct button ready for action.

🎄🎄🎄【Product parameters】Support TTL Autoflash, 01-99 WIRELESS ID, 2.4GHz,1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation,16 Groups and 32 Channels to Wirelessly Control and Trigger, TCM Transform Function, Magnification Function, One-Shoot & Multi- Shoot Setting. Max.110 yd Range Group Modeling Lamp Control, Group Zooming, Adjusting Output Value of All Groups Simultaneously.

🎄🎄🎄【Photographer Power】Camera Flash Trigger Xpro-C to power the photographer. A vision that fits every Strobist in the pursuit of excellence in lighting, TTL flash aspect, direct access, and deadlock control. Confident handling and precise controlling are the perfect complements to the high-performance image.

Compared with YN560-TX, YN560TX II is Lighter, Smaller, Easier to LOCK on the flashes.

YN560 TX II C supports wireless trigger the YONGNUO YN560III, YN560IV, YN968C speedlite and all Canon DSLR Camera

Two Flash Modes: M/Multi. Remote control of Flash Output and Zoom per group, up to 6 groups. 16 Channels, Transmission Range: 100 Meters.

【Two-way 2.4G radio communication, fully compatible with the Canon 600EX-RT flash speedlite and the ST-E3-RT transmitter】Two-way 2.4G radio communication, fully compatible with ST-E3-RT, 600EX-RT, YN E3-RT, YN968EX-RT, YN600EX-RT(II), YN686EX-RT, YNE3-RX.

【Compatible Canon Cameras】 70D, 60D, 50D, 40D, 30D, 100D, 80D, 5DIV, 6DII, 5DIII, 5DII, 5D, 6D, 7D, 7DII, 1D, Rebel T5i, Rebel T4i, Rebel T3i, Rebel T2i, T1i, Rebel XSi, Xti, Rebel XT, Rebel XS, EOS R; Canon speedlite: 600EX (II)-RT 430EX III-RT; YONGNUO speedlite: YN600EX-RT (II), YN968EX-RT, YN686EX-RT, YN680EX-RT.

【4 Flash Modes, 5 groups】 ETTL, M, Multi and GR flash modes. Up to 5 groups (A/B/C/D/E) and 15 units. Supports 1st curtain, 2nd curtain(Only in M mode), high speed sync.

The YN622C-TX transmitter acts as a master control unit to the popular YN622C and YN622C II TTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface.

Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN622C-TX also enhances stability, as well as improving information transmission speeds.

Syne mode ( 1st-curtain, 2nd-curtain, Hi-speed sync ( Auto FP ), Max Sync. Speed: 1/8000s.

10 CHANNELS: 10 Standard Channels easily selected using intuitive dial

POCKETWIZARD COMPATIBLE: Compatible with all STANDARD Channel Transmitters and Recievers with Legacy Firmware

AUTO-SENSING TRANSCEIVER: Radio instantly and intelligently switches between transmitter and receive modes

Xpro-C TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes, but also can control the Cannon original flashes when using in combination with X1R-C receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger

Can as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions

16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

This Item Includes: Yongnuo 2x RF-603N II Wireless Flash Trigger - LS 2.5 Shutter Cable - User Manual - Yongnuo 1 Year Limited Warranty

Compatibility: Nikon DC2 Connection D90/D600, D3000/D5000 Series, D7000 Series Cameras

Type: FSK 2.4GHz wireless remote control system

✔Compatible with Canon, Nikon, Olympus, Panasonic, Pentax, Fuji, Samsung,Sony(Except Sony Flashes).

✔8 channels, max sync speed of 1/250s, 2.4GHz frequency, strong anti-interference, communication range up to 200m.

✔The receiver can trigger the hot shoe flash triggered by the center contact.

Instantly familiar and comfortable to use. Make settings by touching icons or sliding a finger on the screen. The large color LCD displays ambient, flash, cine and other information in a clear and understandable way.

The L-478-Series meters are especially useful when using flash to lighten shadows or reduce background detail. That's because they measure ambient and flash simultaneously and automatically indicate the percentage of flash in the total exposure.

The L-478-series has two motion- capture modes to fit camera in use. Touch to set shutter speeds for HD SLR cameras or quickly select frame rates and shutter angles for Cine.

Wireless Frequency System: 2.4GHz

Operating Distance: up to 25m.

16 Selectable Channels

*Godox X1R-S Receiver is compatible with Sony DSLR Cameras(Support TTL Autoflash), Support for the Cameras with a PC Sync Socket

*Built-in 2.4G wireless transmission provides 100 meters further transmission distance and creative triggering methods.

*Godox X1R-S Wireless Receiver Support for TTL Autoflash, 1/8000s High Speed Sync, Flash exposure compensation, flash exposure lock, modeling flash etc.

【Support YN622 communication mode and YN560 RX communication mode】 New upgrade version YN622NII can set to "622" or "560-RX" communication mode through the power switch, supports receiving the trigger signal of the YN560-TX/RF605(603 mode)/RF603(II) series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade.

【1/8000s HSS, TTL/M/Multi mode】Remotely change the modes and parameters of the flash quickly when using the N's series DSLR cameras which supports external flash function , such as TTL ratio or manually set each group of flash output. Support high-speed sync, the max sync speed is 1/8000s, Support i-TTL, Manual and Multi flash modes. Support iTTL flash installing on the top of transmitter.

【Remote control reaches 100M, 7 wireless channels and A/B/C three groups】YN622N II i-TTL wireless flash trigger is a high performance master and slave equipment of multiple flashes photography, through digital FSK 2.4GHz radio wireless transmission, and different photographic effects can be realized through setting your flash at 360 degrees. It design of transceiver, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups.

【Note】1.The transmitter and receiver need to be set up the same channel. 2.Before use the transmitter,please take out the transparent film on the transmitter. If you have any questions,you can contact us firstly.

【Flash trigger set】The CT-16 wireless radio flash trigger has 433MHz transmit frequency.It can secures fast response and stable transmission.It also has studio flash interface to wirelessly trigger several kinds of studio flashes and the maximum synchronous speed up to 1/250 second.(Different SLR sync speeds are different)

【Iinstallation】The Godox CT-16 3-in-1 flash transmitter is equipped with a 23A 12V lithium-ion battery which can normally be used over ten thousand times. The receiver slides the battery-chamber cover from the back of the receiver and inserts two AAA 1.5V alkaline batteries.(not included)

【Versatile Professional Flash Trigger】 This QPRO-C wireless flash trigger is powerful and supports a wide range of functions, including TTL, 1/8000s high-speed sync, multi-flash, manual flash, flash exposure compensation (FEC), magnification function, group modeling lamp control, group zooming, Single-point triggering and more. You can also adjust the output values of all groups at the same time

【Screen Magnifier Function】The LCD screen clearly displays flash settings and shows 5 groups at the same time. Double press the group button quickly to switch the display from the settings for all groups (A–E) to a magnified view of the settings for one group. This magnification function will display the details relating to each group setting.

【All-in-one QPRO-C Trigger】 A single QPRO-C can wirelessly trigger any NEEWER lights which have a built-in Q system (NEEWER Q3, Z1-C, NW420-C, NW655-C, NW665-C, S101-300W/400W Pro). To trigger other flashes and strobes(2.5mm sync cable needed) that do not come with a built-in Q system,it is necessary to purchase a NEEWER Q-C receiver separately.

XTR-16 of USB connector wireless power-control flash receiver is designed with 2.4G wireless X-system.

It can be compatible with TTL wireless trigger X1 series Transmitter to trigger flash.

It incorporates multiple functions, such as high-speed sync, and can realize TTL flashes and non-TTL flashes combined use.

Built-in light meter

Quadra lense system

Aperture control

XTR-16 of USB connector wireless power-control flash receiver is designed with 2.4G wireless X-system.

It can be compatible with TTL wireless trigger X1 series Transmitter to trigger flash.

It incorporates multiple functions, such as high-speed sync, and can realize TTL flashes and non-TTL flashes combined use.

Xpro-C TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system, e g. camera flashes, outdoor flashes and studio flashes, but also can control the Cannon original flashes when using in combination with X1R-C receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger

Godox XPro-C Flash Trigger Transmitter with E-TTL II 2.4G Wireless X System HSS LCD Screen for Canon DSLR Camera, Fully support TTL autoflash. 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shcx)t setting, group modeling lamp control, group zooming, adjusting all groups1 output value simultaneously, etc.

Can as a Wireless Godox Flash Trigger / Wireless Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions

Works with Canon's non-radio ETTL flashes and will communicate with the Phottix Laso Transmitter, Canon ST-E3-RT flash transmitter, and radio enabled Canon Speedlites. AA batteries required (best with Polaroid AA batteries)

Make any non-radio enabled Canon E-TTL or E-TTL II Speedlite compatible with Canon's range of Radio-Enabled Speedlites

Offers 15 Channels that can be separated into 5 Groups at a total range of 328 feet, providing the ultimage control over any lighting setup

Full I-TTL with B1 and B2 flash heads

Remote manual firing of all air Strobes

8 channels, 3 groups

Selling by LETWING DIGITAL,Still Selling Other Cells Trigger

All-in-one be a wireless transmitter and a receiver for studio flash/Speedlite Flash, and camera shutter.

16 multi-channel triggering, 100m distance ,stable signal transmission, and sensitive reaction, it gives photographers unparalleled flexibility and control over their strobist setups. The transceiver applies to hotshoe-mounted cameras.

🌞 Contents: [1 x] Radio Remote Trigger, [1 x] 16-Channel Radio Signal Receiver

🌞 [ HIGH-SPEED & SYNCHRONOUS ] High-speed and sync speed: 1/200 sec

🌞 [ MAX 30M DISTANCE TRANSMITTER ] 433MHz wireless remote system, outdoor operation distance: ≤ 30m, Indoor operation distance: ≤ 20m, no limits with directions or angles.

Supports TTL and manual wireless control

Up to 8 groups control

Up to 328.08 ft. (100 meters) transmission distance

2.4GHz Reduced Interference Frequency | 4 Channels

Range: up to 300' | Flash Sync up to 1/8,000 Sec.

LED Indicators | Studio Flash Cable and Monoplug Adapter

Usb-c to USB-A charging cable

Protective case

Limited 2-year