Best 125 Plumbing Pipe Fittings in 2026

PEX Kit includes 10 - 1/2 Inch PEX Elbows 90s, 10 -1/2 PEX Inch Tees, 10 – 1/2 Inch Straights Couplers

Made from Lead Free brass which means you can use on potable domestic water lines (washer, sink, shower, etc..) and for radiant heating applications. Highly dezincification resistant or corrosion due to high quality brass. Universal Plumbing Code compliant with AB1953

Easy to install, only need a Crimp/Cinch tool, PEX ring, PEX fitting and PEX pipe. View video for instructions. No glue, flames, solder or bonding agents. Easy installation for potable and radiant applications.

Manufactured in China

Easy to use

Highly durable

✔️【 Lead Free Non-Pollution Compliant Brass 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Suitable for new or retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【Compatibility & Applications 】: Manufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tube. COMPATIBLE with ONLY Crimp or Cinch Type rings and/or connectors. NOT Compatible with: -Expander Fitting System, Uponor/Wirsbo Expander System. This brass crimp fitting can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

SURE-VENT PVC AIR ADMITTANCE VALVE: Provides the ideal venting solution for island sinks, remote bathroom groups, and remodel jobs by eliminating the need to be connected directly into the stack vent

EQUALIZES PRESSURE: Keeps the sewer and atmospheric pressures equalized, allowing water to drain freely

ONE-WAY VALVE: Allows air to enter the plumbing drainage system when negative pressures develop without the use of a vent extended to open air and to prevent sewer gases from escaping into the building

EASY TO USE: Cut your 1-1/4" PVC pipe to the desired length and insert it into the sockets to quickly build offset or tiered structures with this PVC fitting. Connect PVC pipe at both horizontal and vertical angles with a single PVC fitting.

GENUINE FURNITURE GRADE PVC: 4-Way PVC fittings are made from ultra-strong, premium PVC resin designed for direct outdoor & sunlight use. PVC maintains durability and appearance for 25+ years, with strength 5x stronger than plumbing or imported fittings.

SAFE & NON-TOXIC: These PVC 4-Way Tee connectors are safe for children & pets and can be used in hydroponics and aquariums. FORMUFIT PVC pipe connectors have no heavy metals, phthalates, or calcium cobalt, unlike imported PVC furniture fittings.

DECORATIVE 1/2 INCH FLOOR FLANGES: Our newly designed PIPE DÉCOR floor flanges are the perfect choice for all of your DIY design needs. These flanges have the same industrial look and feel as traditional plumbing flanges but were designed with decorative applications in mind. They are slightly smaller and lighter than authentic industrial flanges, but still retain the same vintage aesthetic. Accentuate your space no matter what your style is.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choice with Pipe Décor fittings. Make custom industrial shelves to mount to your wall, towel bars, lamps, coat hooks, tables, desks, and much more. Whatever you can imagine you can create. Showcase your own unique sense of style and design.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 M12FLG10PK.

【RELIABLE PEX MATERIAL】- Amount: 2 rolls; Color: Red / Blue; Nominal Diameter: 1/2"; Total Length: 100ft. Made of excellent PEX material, this non-barrier PEX pipe is non-toxic, maintenance-free, and anti-aging. Fit for potable water or radiant floor water projects and keep quick & uninterrupted hot/cold water flows.

【SUPERB SEALING】- Compatible water temperature:-40℃ to 95℃. This non-broken 1/2" PEX tubing can tackle different weather circumstances, no matter the high temperature or cold days, to ensure the integrity and safe use for longer life expectancy.

【PREMIUM FLEXIBILITY】- Manufactured with min.5" bending radius, this pex tube is easy to bend for different ground situation. Pressure rate: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F. PEX material ensures its crack & leakage-proof features.

HIGH QUALITY- The whole hose clamp (including the band, housing and screw) are all made of premium 304 stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.

WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size 1/2'' - 3/4'' (13-19mm). Fit for hose outside diameter 1/2'' - 3/4'' (13-19mm).

WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor.

AUTHENTIC 2 INCH PIPE FLANGES: Our Pipe Décor 4 pack of genuine malleable iron threaded floor flanges are the perfect choice for your DIY needs. Our flanges are the very same quality as those found in your local hardware store but sold for a fraction of the price. Multipack quantity gives great value. Each flange comes with four screw holes allowing you to secure your flange to floors or walls of virtually any material.

IDEAL FOR DIY: Unleash your creativity and bring industrial style into your home, apartment, loft, office, living room, kitchen, bathroom, garage, bar, or other interior space of your choosing with Pipe Décor fittings. Make custom industrial bar furniture, table legs, chairs, shelves and more. Whatever you can imagine you can create.

SHOWCASE YOUR STYLE. Metal flanges fit a variety of styles including: steampunk lighting, industrial, factory, French country farmhouse, vintage, retro, reclamation, DIY customized, exposed heating and cooling, water piping and modern room themes. We also sell a variety of fittings in various sizes, pipe, and pipe nipples, elbows, 5-way fittings, tees and more to help you complete all your do it yourself projects. This product's manufacturer part number is 365 2FLG4PK.

【APPROVED TO USE】: SUNGATOR push pex fittings are Certified and listed to ASSE 1061, NSF/ANSI 61; SUNGATOR plumbing fittings meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution.

【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with SUNGATOR push fittings and ease of use reduces installation errors as pushfit plumbing fittings completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms; Just push and lock the pipe to get the seamless performance.

【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, SUNGATOR push pex plumbing fittings are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe.

Size - Floor Flange Fits Standard 1/2” Threaded Pipes and Fittings. NOTE: The GeilSpace Grey Pipe & Fitting series are coated with a rust preventive oil during manufacturing process, you need to clean them and do some anti-rust measures.

Material & Products - GeilSpace Grey Pipes and Fittings are designed with a standard industrial; materials and threads constructed from sturdy metal; our products’ surface is coated with a rust preventive oil during manufacturing process, and you can seal it after cleaning.

More Choices - Please find more fittings and pipes from our store, we offer the most comprehensive range of fittings and pipes to meet ALL your needs. You can also find BLACK PAINTED pipes and fittings in our store.

INSTALLATION SIMPLIFIED: The design of the 18" extension pipe is to make installation easier and to conceal the plumbing behind the wall.

SECURE CONNECTION: The pipe has an inner gasket which connects to the rear spigot of your Saniflo toilet, creating a sealed connection which will prohibit leaks.

DESIGN IN MIND: The extension pipe comes with a paintable, decorative trim to fit in with your current bathroom décor. This special design feature further adds to the seamless design.

✔️【 Lead Free Non-Pollution PPSU polyphenylsulfone Material 】: Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. Poly Alloy pex Fittings are suitable for domestic water or radiant heating system, also used retrofit construction and for hot or cold water distribution.

✔️【 Extra Long Service Life 】: Resists corrosion and mineral buildup, rust, and freeze damage.

✔️ 【 Applications 】: This Poly PEX A expansion fittings can be used in plumbing jobs and connects PEX Pipe in water distribution and hydronic heating systems.

PIPE TYPE: black pipe 3/8" x 3 feet male (NPT) National Pipe Thread taper made of superior rough caoting steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

PIPE Type: black pipe 1/2" x 1.5 feet, male (NPT) National Pipe thread taper made of superior rough coating steel for commercial and residential application

PIPE SPECS: black coated schedule 40, 150 PSI

PIPE FUNCTION: Used for indoor in low pressure plumbing applications such as water, oil, natural gas, LP, steam and air

Equipped with 1/2 inch Pex-a Expansion Inlet and 3/4 inch Male Hose Thread(MHT )

Both Central and Side Drain Design

Measures 9.25 inch x 3.5 inch x 8 inch; Includes a Pre-installed Support Bracket, a Faceplate Cover;

1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused.

2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work. It is a kind of plumbing tool for professional plumber.

3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch.

★【Superior quality】:Made of high-quality PPSU material, lead free, no pollution, no metal, can drink directly without burden, friendly and healthy to the human environment.

★【 Extra Long Service Life 】:Lightweight and durable, with good chemical stability. Good performance in heat and water resistance, corrosion resistance, reverse osmosis, antifreeze damage, protection from mineral buildup, chlorination and other types of water.

★【 Easy Installation 】 : Features a barbed connection for full insertion of expansion fittings, leak free, cold connection. Compatible with any PEX brand manufactured to North American standards.★【 Easy Installation 】 : Features a barbed connection for full insertion of expansion fittings, leak free, cold connection. Compatible with any PEX brand manufactured to North American standards.

PUSH TO CONNECT COUPLINGS: Quick Fitting offers a patented design that delivers superior sealing performance and lower insertion force, backed by a 75-year warranty. Our brass fittings are certified lead-free making them safe for water lines and safe for your health. These multipurpose connections are designed for combinations between Copper, PEX, PE-RT, or CPVC tubing.

DIY PLUMBING: Our push-to-connect fittings are built for every job and for every user from professional contractors to even the most inexperienced users. These straight couplings can be used for indoor plumbing, outdoor plumbing, heating repair, marine repair, RV and mobile home repair, and even irrigation.

EASY INSTALLATION: Simply CUT your copper, PEX, PE-RT, or CPVC tubing, then CLEAN the connected surface of burring, then MARK the insertion depth on the tubing, and finally PUSH on the fitting or valve to meet the insertion depth mark. The disconnect is just as simple! Each pack includes a patented Slip Clip release tool allowing for an effortless disconnection - no other tools required!

Easy to install on the pipe supply lines. Max. 600 PSI WOG (Water, Oil and Gas).

Inlet&Outlet: : PEX-F1807 side fits 1/2" PEX-a/b/c pipes, compatible with PEX F1807 stainless steel & copper crimp rings and stainless steel press sleeves . NOT compatible with PEX F1960 expansion plastic ring.

100% leaking test in the own factory, Max. working temperature: 80℃(176°F).

Connect up to four (4) PVC pipe segments in a cross configuration.

Fits 1-1/4” Size PVC Pipe, which has an outside diameter of 1-5/8” (1.660”)

UV resistant PVC material resists sunlight and fluorescent lighting degradation. Lasts for years in direct sunlight without yellowing, discoloration or cracking unlike sub-par PVC fittings

PACK OF 10 RUSTIC FLANGES: Use your creativity and transform your boring home or office into a beautiful chic, industrial steam punk vintage style. Our raw iron may need cleaned, sealed, or painted to match your favorite projects. �-Inch flanges are the perfect base for your next coffee table, old-school desk, or artsy home decorations

INDUSTRY APPROVED STANDARDS: We only use the finest materials and proudly meet multiple national standards. Our strong and sturdy floor flanges have been approved by the American Society of Mechanical Engineers under General Purpose Standards B1.20., ASTM A53, & ASTM A733. These Authentic Industrial Fittings were created for plumbing, but have various uses for home decor and artistic crafts!

HEAVY-DUTY MALLEABLE IRON: TSP designed our top-rated pipe fittings with authentic malleable iron to provide you with the strongest flanges originally designed for gas oil air and plumbing applications that create perfect vintage custom furnishings and restoration craft materials for projects such as: spigot coat rack, hanging shower rod, bed frames, table legs, tabletop shelves, mounted toilet paper holders, key holders, farmhouse bookshelfs, decorative home decor piping

Provides a reduced socket size for aboveground water supply piping

Copper construction

C x C copper to copper connection type

CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our Metal Hose Vacuum Gauge Locknut Washer 1/2" has 0,5 inch Female Threads.

ENHANCED QUALITY BRASS Makes our Locknut Washer 1/2" Resistant to Corrosion and Safe for high temperatures

RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing. Easy to Install or Change. Doesn’t Leak!

Advantage- 90 Degree Copper has 1.2mm thick copper wall, corrosion resistance, high temperature and high pressure resistance, fast heat dissipation,Copper to copper solder connections is easy

Application- Copper Pipe Fitting mainly used in air conditioning, cooling hydraulic system AND water-supply piping

Specification- Changes the direction of piping 90 degrees angle,For use with Copper pipe with an outer diameter of 1.5-inch

Advantage- 90 Degree Copper has thick copper wall, corrosion resistance, high temperature and high pressure resistance, fast heat dissipation,Copper to copper solder connections is easy

Application- Copper Pipe Fitting mainly used in air conditioning, cooling hydraulic system AND aboveground water-supply piping

Specification- Changes the direction of piping 90 degrees angle,For use with Copper pipe with an outer diameter of 5/16 inch

【Superior Durability】:The washing machine outlet box and valve are UPC certified,which get high Impact,non-corrosive plastic for long-lasting reliability.And 1/4-turn hot and cold shut off ball valve made of lead free brass,that is resists corrosion,rust,and high temperature.

【Function Design】:GUOFIS washing machine outlet box features both central and side drain design,which provide a convenient water drain function for washing machines.

【Easy Installation】:The washing machine outlet box is designed for recessed residential applications,that is used for all kinds of washing machines.And box and frame can be separated for a flexible layout,allow for inverted installation.Fast and strong and mounting.

►【Advantage】- Copper Tee fitting has thick copper wall, corrosion resistance, high temperature and high pressure resistance, fast heat dissipation,Copper to copper solder connections is easy

►【Application】- Copper Pipe Fitting mainly used in air conditioning, cooling hydraulic system AND aboveground water-supply piping

►【Specification】- Changes the direction of piping T shape,For use with Copper pipe with an outer diameter of 1/4-inch x 5/8-inch.

Directly from One of the Biggest Plumbing Systems Manufacturers

1/2 inch Cold Expansion Pex-A F1960 Connection Inlet x 3/4 inch MHT Outlet Connections

Pex Side Compatible with Expanding Fitting System, NOT Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems

Advantage- 90 Degree Copper has 1.5mm thick copper wall, corrosion resistance, high temperature and high pressure resistance, fast heat dissipation,Copper to copper solder connections is easy

Application- Copper Pipe Fitting mainly used in air conditioning, cooling hydraulic system AND aboveground water-supply piping

Specification- Changes the direction of piping 90 degrees angle,For use with Copper pipe with an outer diameter of 1-5/8-inch