Best Ubiquiti Networks Points in 2026

Model: UAP-NanoHD-US UniFi nanoHD Wave-2 Access Point Discretely install the UniFi nanoHD 4x4 MU-MIMO 802.11ac Wave-2 Access Point from Ubiquiti Networks into nearly any building environment, thanks to the optional skins which come in a variety of designs including camouflage, concrete, marble, wood, black and fabric. This Ubiquiti Networks AP also comes equipped with a single Gigabit Ethernet 802.3af PoE-compliant network port and includes mounting kits for easy installation to either the wall

Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint.

Our Smallest UniFi Access Point Available On the Market. UAP nanoHD is 30% smaller than UAP AC Pro version.

Wireless LAN Standard: IEEE 802. 11ac

Frequency Band: 2. 40 GHz

Frequency Band: 5 GHz

802.11ac 3x3 MIMO WiFi Access Point w/ 6x Internal Omni Antennas at 4 dB each. System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10. Signal Rate 5GHz Up to 1300Mbps, 2.4GHz Up to 450Mbps

Free TP Link Auranet Controller software is able to manage and monitor hundreds of EAPs with ease, all from a single location

1x Gigabit Ethernet RJ 45 Port, Can be powered by any of the following: POE plus Switch 802.3at compliant, 36 57V 0.4A or external 12VDC/1.5A power supply

600mw high power long range coverage / up to 1 mile

Wireless n300 speed. Supported Modulation : 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM

Poe and mounting kits included

5+km transmission range OS3 adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

Flexible power supply method enable it easy to deployment OS3 supports 12V 1A Passive PoE and 12V 1A DC power supply option. It helps the engineer to deploy the device flexiblely. OS3OS3

Auto-bridge technology enable it to easy setup OS3 supports auto-bridge technology, It enables the CPE or basestation in factory default settings to connect to each other automaticaly after the device is powered on. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.

High power, Long range and multiple floor penetration

Dual-band operation

Converts housing

POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Flexible Dual Radio with 5GHz and 2.4GHz or two 5GHz configuration, up to 5.38 Gbps data rate, uplink/downlink OFDMA, MU-MIMO, BBS coloring, TWT and Embedded IoT radios enabling BLE 5.0 and Zigbee

CISCO CLEANAIR: Powered by Cisco RF ASIC, offer superior analytics and security

ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices

Product Description NETGEAR WG602 54 Mbps Wireless Access Point - wireless access pointDevice Type W

Enclosure Type External - NOTE: THIS PRODUCT CANNOT BE SHIPPED TO MASSACHUSETTS OR DISTRICT OF COLUMBIA (WASHINGTON, D.C.)

Dimensions (WxDxH) 6.9 in x 4.6 in x 1.1 in Weight 0.7 lbs Localization North America

802.11ac Wave 2 with 3x3 Multiple-Input Multiple-Output (MIMO) technology with two spatial streams when operating in single-user or multiuser MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.

Multiuser MIMO (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2 capable clients simultaneously to improve client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as single-user MIMO.

Transmit beamforming technology improves downlink performance to mobile devices, including one- and two-spatial-stream devices on 802.11ac, while improving battery life on mobile devices such as smartphones and tablets.

Dual band concurrent in 2.4 and 5 GHz radio band for maximum wireless throughput

Stylish and elegant design with easy mounting options (e.g., ceiling, wall and desktop)

Backward compatibility with 802.11a, 802.11g and 802.11b network devices

POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Dual Radio, MU-MIMO Wi-Fi 6, up to 5.38 Gbps data rate, uplink/downlink OFDMA for latency reduction, MU-MIMO for maximizing throughput, BBS coloring for increased density, TWT for device energy efficiency

INTEGRATED BLE: Bluetooth Low Energy (BLE) 5.0 radio enables location-based use cases such as wayfinding and asset tracking

ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices

MU-MIMO: 802.11ac Wave 2 with 4x4 Multiple-Input Multiple-Output (MIMO) technology with four spatial streams when operating in single-user MIMO mode and three spatial streams while operating in multiuser MIMO mode, offering 1.7 Gbps rates for more capacity and reliability than competing access points

APPLICATION VISIBILITY AND CONTROL: Network-Based Application Recognition (NBAR) deep-packet inspection technology provides application-aware control on a wireless network and enhances manageability and productivity. It also extends Cisco Application Visibility and Control (AVC) as an end-to-end solution, which gives a complete visibility of applications in the network and allows the administrator to take some action on the same.

RADIO RESOURCE MANAGEMENT: Cisco Radio Resource Management (RRM) allows Cisco's Unified WLAN Architecture to continuously analyze the existing RF environments, automatically adjusting each APs' power and channel configurations to help mitigate such things as co-channel interference and signal coverage problems. RRM reduces the need to perform exhaustive site surveys, increases system capacity, and provides automated self-healing functionality to compensate for RF dead zones and AP failures

POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Dual Radio, MU-MIMO Wi-Fi 6, up to 5.38 Gbps data rate, uplink/downlink OFDMA for latency reduction, MU-MIMO for maximizing throughput, BBS coloring for increased density, TWT for device energy efficiency

INTEGRATED BLE: Bluetooth Low Energy (BLE) 5.0 radio enables location-based use cases such as wayfinding and asset tracking

ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices

FortiAP access points are managed centrally by the integrated WLAN controller of any FortiGate security appliance or through the FortiAP Cloud provisioning and management portal.

Unified management console simplifies operations, ensuring consistency in effective policy enforcement and compliance.

Wireless LAN security done right, from the leader in network security. Integrated Firewall, IPS, Application Control, and Web Filtering protect the wireless LAN from the latest security threats.

Wi-Fi 6 and WPA3

Includes Wi-Fi 6 2x2 radio with four internal antennas

Maximum TX power delivers 22 dBm and a 3dBi antenna gain with one Ethernet port supporting up to 1 Gbps

The wAP 4G kit s a small weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity

Connect to the wAP’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device

The wAP LTE also has one 10/100 Ethernet LAN port for your wired devices

IEEE 802.11a/n Compliant, Speed up to 300 Mbps on 5 GHz

Internal 19 dBi Dual Polarization Directional High-Gain Antenna with Narrow Beam

Ideal for PtP applications that need to cover large distances where Ethernet or even Fiber cabling is not possible or practical.

POWERFUL Wi-Fi 6 PERFORMANCE: 4x4 Flexible Dual Radio with 5GHz and 2.4GHz or two 5GHz configuration, up to 5.38 Gbps data rate, uplink/downlink OFDMA, MU-MIMO, BBS coloring, TWT and Embedded IoT radios enabling BLE 5.0 and Zigbee

CISCO CLEANAIR: Powered by Cisco RF ASIC, offer superior analytics and security

ECOSYSTEM: End-point interoperability and optimized performance on Apple and Samsung devices

The LtAP mini LTE kit is a small weatherproof wireless access point with a built in cellular modem that supports 2G, 3G and 4G (LTE) connectivity on International LTE bands

Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device

The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging.

1000Baset-t (PoE)

Included: ceiling mounting kit, wall mounting kit

Antennas: 4 internal