Best Hot Tub Pool Spa Replacement Parts in 2026

3-Layered Pool & Spa Filter - We design our pool & spa vacuum filters with 3 thick layers to pick up as much debris, dirt, & grime from your pool.

Fits Pool Cleaner Models - Our pool filter is specifically made for TigerShark, SharkVac, & AquaVac robotic pool & tub cleaner robots.

Efficient Reusable Filters - Maximize your use of our pool vacuum filters. These pool & hot tub cleaner filters can be washed after every use. Simply use a power washer or a hose on our pool robot filters so they’re ready for your next use.

Compatibility: Compatible with Hayward Turbo Cell T-15, T-9, T-5, T-3 and Blue works BLT15H, BLT9H, BLT3H. Blue Works Cell Cleaning Stand isn't produced or sold by Hayward.

Much safer and easier: Clean salt cell without the mess. Please pour in water/acid mixture(3 parts water, 1 part acid)-Add acid to water (never water to acid). Just wait 10-15 minutes.

Solid Construction: Screws on to the end with the wire to allow the salt cell to stand up.

MADE IN THE USA. Fits Most Models - Our ring plug is compatible with most Hayward Pool Cleaner Pumps & Power-flo LX Pump series.

Ideal Spare for Future Use - Constantly losing your pool filter pump plugs? Stock on our handy pool cover pump plugs & add them to your essential pool accessories.

Smoother Performance - Can’t clean the pool without the pumps? Make pool maintenance easier & more efficient with our reliable set of replacement pipe outdoor plug with gasket for your Hayward pool filter pumps.

Use with any Hayward or Goldline control panel: AquaLogic, ProLogic, AquaPlus

10K OHM Sensor used for Water, Air or Solar applications, Includes 15ft cord

Replaces Part No: GLX-PC-12-KIT, AQ-SOL-LV, AQ-SOL-LV-TC, GL-30, GL-235, GL-235 LV, GL-235 LV/HV, PC-10K

Key cover and handle assembly replacement part

Fits Hayward multi-port valves model SP0714T

Also fits Hayward pro, VL, HCF and S200 series sand filter system models S210t93SFT, and HCV20715

Brand New Aftermarket Hayward 10” x 10” Square Skimmer Lid

Universal generic replacement part ~ Compatible with Hayward

Contains UV Inhibitors to protect against sun damage

【Compatible】 This GLX-FLO-RP flow switch can compatible with all the salt chlorine generator systems of Hayward and Goldline. GLX-FLO-RP flow switch replacement can be used with Hayward Goldline Salt Chlorination Turbo Cell.

【Suitable Models】The swimming pool flow switch suitable for almost all Hayward Goldline salty system,Hayward part GLX-FLO-RP can replace GLXFLORP, GLX-FLO-HP, Q-12DS-C2, OPT-F/S. Suitable for : Pro Logic, Mineral Springs, Mineral Springs MS10/MS11, Aqua Plus, Aqua Rite XL, Aqua Logic, Aqua Rite Pro, Aqua Rite compatible, Aqua Plus, H40, SwimPurePlus, SplashCLEAR, SmartPure, Splash SP-40...

【Accessories】 The water flow sensor hayward GLX-FLO-RP has a 15-Foot Cable. One end is a standard Phone Jack connection and it has a circle gasket and a round of tape.

Hydro stream return jet fitting replace Hayward SP1419B

Allows to control the velocity and flow

3/8" opening and 1-1/2" MIP thread

Fits SwimClear and SuperStar-clear cartridge filters

Fits Hayward swim clear and super star clear series cartridge filters

Holds four cartridges

Premium, heavy duty pool filter connection replacement hose for above ground or soft sided pools with non-threaded connections. Sturdy, high quality construction provides utmost chemical and sunlight resistance.

Crystal clear design allows you to easily monitor the water flow. Durable and rigid, yet lightweight and flexible. BPA free and FDA compliant high quality virgin PVC.

Corrugated construction ensures maximum durability and maintains steady water flow. Cuff-less design with smooth inner bore prevents leaks at connection ends.

EXACT REPLACEMENT HAYWARD SP0729 - Part number SP0729 is in a category of its own. It’s different from other Hayward ball valves as it has a hose adapter. Please ensure that you select the right variation according to your required application.

1.5” MIP X 1.5” -1.25” HOSE ADAPTER 2-WAY ECONOLINE BALL VALVE - The 1.5 inches male end connects to Hayward filters, skimmers, and pumps with 1.5 inches female inlet/outlets while the 1.5 inches and 1.25 inches hose adapter end is compatible with hoses that have inner diameters of 1.25 inches or 1.5 inches.

ABS PLASTIC NON-CORROSIVE VALVES - This is an all-plastic assembly, including the stem. Corrosion and stuck stems are non-issues compared to metal ball valves. ABS plastic is also durable and resistant to UV degradation. Several parts are also replaceable, including the stem, o-rings, ball, handle, and end connectors.

Plastic casing pressure gauge - Clear Plastic face

Threaded brass - Back mount - 1/4" Male NPT

0-60 psi readings

Hayward Sand Filter Valve Label Plate Sticker SPX0715G FITS ON SP0715ALL SP0715XR50 SP0710XALL SP0715X62

2" x 2.5" versions to accommodate most plumbing configurations

Clear valve cover for easy viewing of sealing mechanism

CPVC and PVC valve options to satisfy any plumbing requirement

Cleaning wand features jet-action

Fits Hayward Perflex DE filters

Attaches to garden hose to quickly clean FlexTubes, TM vertical grids and cartridge elements with minor disassembly

1.Replacement for Hayward SP0714T Pro-Series Control Valve Vari-Flo 1-1/2-Inch 7-Positions Top Mount Clamp.Compatible with any above-ground Pro-Series Sand Filter and VL210T1285S and VL210T1285STL Sand Filter

2.The SP0714T multi-port water valve can be realized provide greater water flow at lower pressure .

3.Seven functions of valves positions :FILTER, BACKWASH, RINSE, WASTE, CLOSED, RECIRCULATE, WINTER.

1.Replacement for Hayward SP0714T Pro-Series Control Valve Vari-Flo 1-1/2-Inch 7-Positions Top Mount Clamp.Compatible with any above-ground Pro- or VL Series Sand Filter

2.The SP0714T multi-port water valve can be realized provide greater water flow at lower pressure .

3.Seven functions of valves positions :FILTER, BACKWASH, RINSE, WASTE, CLOSED, RECIRCULATE, WINTER.

INCLUDE: 1 O-ring, 1 spider gasket, 1 plastic washer, 1 metal washer, 1 plastic snap ring(which has a slot in it), 1 rubber washer, 1 rubber gasket(small o-ring)

NOTE: Make sure the pump is turned off and always depress the handle fully before turning. You’d better prime an adhesive to keep it in the groove.

FUNCTION: The o-ring has high tensile strength and elasticity. This Seat Gasket Seal Replacement Kit can eliminate hose leaking.

👉👉👉Please confirm the size before purchasing, our sand filter part is not suitable for 12-inch pool sand pump. It can fit 8 to 8.5-diameter sand filter(refer to Figure 3), and check whether your brand equipment is suitable for use , our pool filter sand clamp is only suitable for Hayward series models, so please pay attention to check our list of compatible models, thank you!

✅【Product Overview】Sand Filter Flange Clamp Part Number : GMX600NM. Fit for Hayward pro series sand filter S144T and other sand filter valve clamp models.（Notice：This clamp will NOT work on Bestways or Intex Filters. It only applies to Hayward.）

✅【Compatible with】Our GMX600NM flange valve clamp fit for Hayward variflo xl clamp; It can be widely used in Hayward Pro-Series Sand filter the following models, S144T, S164T, S166T, S180T, S210T, S210S, S220T, S220T2, S230T, S244T, S244T2, S244S, S270T, S310T, and S360T for Hayward Above Ground, In Ground Pools filter.

Lateral replacement

Fits hayward sand filter series s200, s244slv, s311sxv

Weighs 2-1/2-pound

𝗥𝗲𝗽𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁 𝗳𝗼𝗿 𝗧𝗲𝗻𝘀𝗶𝗼𝗻 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗖𝗹𝗮𝗺𝗽 𝗞𝗶𝘁 : 190003 Tension Control Clamp Kit compatible with FNS Plus Filters 24, 36, 48, 60; compatible with Clean & Clear Plus Filters CCP240, CCP320, CCP420, CCP520; compatible with Flt Quad De 24 36 48 60 80 100; compatible with 180008, 160340, 160301 and hayward de6020. (Please refer to your part number or dealer before purchasing to ensure compatibility.）

𝗣𝗼𝗼𝗹 𝗙𝗶𝗹𝘁𝗲𝗿 : Pool filter clamp fits Clean & Clear Plus pool and spa filter. Also fits for FNS Plus, Quad pool and spa D.E. filters. Include: Tension Clamp, Washer, Spring Cylinder Nut Assembly. Our pool filter clamp sssembly is the same size as the original parts (190003). Measures 23-1/4-inch length by 2-1/4-inch height by 22-1/4-inch width.

𝗛𝗶𝗴𝗵 𝗤𝘂𝗮𝗹𝗶𝘁𝘆 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 : 190003 pool control clamp for filter, made of high quality stainless steel material, rovide excellent performance and long service life. The tension control clamp kit can withstand the wind and the sun, prevent leak and premature failure to ensure it can work for a long time. It has been strictly inspected and tested by the manufacturer before leaving the factory,to meet or exceed OEM standards.

【Compatibility】ChlorWorks Salt Cell Model No.CWH15B is compatible with Hayward salt cell Model No.T-Cell-15, and our salt cell is also compatible with Hayward Goldline AquaRite, SwimPure, AquaRite XL, NatureSoft, SmartPure, Mineral Springs, and Blue Essence Systems, requires software revision levels of r1.50-the current version. And this salt cell is not compatible with Hayward automation systems, such as OmniLogic, OmniHub, ProLogic, AquaLogic, AquaPlus, etc

【Easy Installation】Plug and Play, without reprogramming/updating if you choose the same cell size as your old salt cell. Tips: If you use a variable speed pump, please install the cell upside down

【Easy Maintenance】The automatic reversal cycle helps keep the salt cell free from calcium buildup. Tips: We still suggest that you inspect the inside of the salt cell every three months

Compatible with All Hayward 6060 Booster Pumps; Chlorine Applications

All Components Meet or Exceed OEM Specifications

American Owned & Operated Business - Made in the USA

.We design these drain plugs to be compatible with various pool cleaning pump models. For external threaded parts with a size of 1/4 inch, the installation and operation of these drain plugs are the same as the original ones

.Our drain plugs can withstand extreme temperatures without brittleness or deformation. Our drain plug kit is made of durable plastic material and can withstand rough and frequent use.

.Our drainage pump pipe plugs are specifically manufactured for a range of models, so you can reduce the time, effort, and cost of necessary outdoor swimming pool maintenance

【Pool Filter Gasket Replacement 】Replacement for Hayward ECX1105 pool filter diaphragm gasket,for Hayward perflex DE filters models EC65, EC65A, EC75, EC75A

【Fits for Hayward Filter Gasket】Our o-ring gasket rebuild kit replacement parts for Hayward ec65 ec65a ec75 filter gasket can enhance your filtration system and restore your pool or spa filtration system to peak performance.

【Premium Materials】Our replacement for Hayward perflex gasket seal Kit is made from high-quality materials that are less breakable and more durable, ensuring long-lasting performance.