Best Led Power Distribution Units in 2025

120V/15A Rackmount Surge Protector provides critical power protection for data centers, network closets, and VoIP Phone systems

OUTPUT: 12 NEMA 5-15R OUTLETS (6 front and 6 rear); INPUT: NEMA 5-15P straight plug, 15 ft power cord

VERSATILE RACKMOUNT OPTIONS: Allows for the PDU to be installed vertically or horizontally

18 Channel Security Camera Power Supply Distribution Box with DC Male Pigtails and Key Lock

Input Voltage : AC100-240, 50/60 Hz / Output Voltage : 12V DC 10A

Key Lock Prevent Unauthorized Access, Individual LED power indication

9 channel camera power supply panels for up to 9 cameras

Max. output 5 Amp total. Maxim for each port is 1Amp

It can offer a more professional alternative to individual power adapters

METERED ATS PDU: 16/20A single phase 200-240V metered automatic transfer switch (ATS) power distribution unit with a digital LED meter allows locally monitoring input voltage and load levels, and a built-in Automatic Transfer Switch (ATS) provides a redundant power option.

10 OUTLETS: 1U horizontal rackmount PDU features 10 total outlets - (8) C13; (2) C19. The outlets are programmed for sequential turn-on to prevent in-rush equipment interaction on startup. Also comes with a set of two C20 inlets, 12 foot cords to support connection to separate primary and secondary power sources.

RUGGED BUILD: Built with a reversible all-metal case, and high-quality outlets & plugs are designed to provide many years of reliable service under the most taxing environments. Made with a built-in card slot to support optional SNMPWEBCARD to permanently upgrade this PDU’s C13 outlets to be remotely switched and monitored.

【13-Channels Dual-Pass Power Supply】The PCB power distribution board can distribute 1-channel dual-pass power supply into 13-channels dual-pass power supplies, which is convenient for the power supply of multiple electrical appliances.

【Three Connection Methods】The design of the power distributor can make it have three ways of use. First: directly divide the positive and negative poles of 1 channel power supply into 13 channels. Second: You can connect several PCB power distribution board to expand more power interfaces. Third: You can short-circuit any interface at both ends of the power distribution board to achieve the effect of a multi-point interface of single-pass circuit.

【Built-in Double-Layer Wiring】The double-layer thick wiring is used inside the PCB board, which has a better power flow effect, and there will be no poor power contact or power failure.

<p>✔ COMMERCIAL GRADE QUALITY: New Metal Materials, Compression, Wear-resisting Reinforcement Enclosure Structure,Used more safely and conveniently than other thanks to its sealed design

<p>✔ SEPARATELY FUSED PORTS: Every Channel is Protected by using separate fused to ensure short-circuits and surges do not affect other connected devices.

<p>✔ TOTAL 10 AMP MAX OUTPUT: DC Voltage Can be Adjusted 10%, Good Load Capacity, Input and Output Over-voltage Protection

Max. output 30 Amp total. Maxim for each port is 1.6Amp ,18 port design allows the power to support several cameras simultaneously

LONG LASTING RESET-ABLE FUSE: Each output has individual Fuse/LED-indicator, 2A Fuse, easy to replace, Long lasting.

MULTIPLE USES: can be used to power DC 12V devices, including CCTV security equipment, Cameras, DVRs, Mics, and Lighting equipment.

Digital Voltmeter Displays Incoming Line Voltage

AC Noise Filtering Reduces Radio Frequency (Rfi) & Electromagnetic Interference (Emi)

Spike & Surge Protection Ensures Equipment Stays Safe & Power Stays Clean

【12V 18 Channels】12V DC, 18 port regulated power supply

【20 Amps】Max 20 Amp total. Maximum for each port is 1.6 Amps

【LED Indication】Individual LED power indication

19" Rack Mount PDU with Power Switch

Input plug: NEMA 5-15P Pivotal

Receptacle: NEMA 5-15R

This 9 channel camera power supply panels for up to 9 cameras. Over current and voltage protected

Key lock prevent unauthorized access

Individual PTC Output Protection & LED indication

20 AMP/ 18 PORT

110-120 VAC 60 Hz INPUT

12VDC OUTPUT

NON-CONDUCTIVE – Heavy-duty solid rubber “non-conductive” enclosure suitable for indoor/outdoor use. NEMA 3R rated for weather resistance to rain, sleet, snow and external formation of ice on the enclosure

SPACE SAVING STACKABLE - Modular design allows for multiple-tier, stacked use and storage

POWER SURGE / OVERLOAD PROTECTION - Six (6) 20A Duplex GFCI (ground-fault circuit interrupter) receptacles are OSHA compliant. Easy access via transparent side-entry, hinged cover

💡 Accurately dial in your desired voltage and current output with the front-mounted control knobs on our CSI1802X linear power supply.

⚡️ Stable and reliable DC power up to 18 volts and 2.0 amps provided by our fully regulated benchtop power supply.

📈 Multi-loop high precision voltage regulation and progressive current regulation ensure accuracy and consistency in your power supply output.

AC input range for domestic or international use

Built-in Short circuit, overload, and over voltage protection

Forced air cooling by built-in DC fan

【Premium Performance】 Rated Voltage: AC 100–250V Input, Maximum Output Power: 2800W, 8 total outlets for your devices. L and N Double-break Switch, smart EMI.RFI Protection, and Gen 3 10KA Surge Protection module

【High-end Appearance】 The Surge Protection PDU adopt four-layer Piano Paint T6 Hardened Aluminum Profile, UL94V-0 Grade Flame Resistant Material, 6 FT robust Power cord

【High-precision Instruments】 The Power Distribution Unit built-in High-precision measuring instruments, Measurement Accuracy：Class-1, OLED screen display current, voltage and power clearly

Utilizes SMD technology - Pre-Settable Voltage & Current levels - Front Panel On/Off Switch

Large LED readout for Voltage & Current - S+ & S- Sampling terminals

Voltage 0-120 VDC - Current 0-3 Amps

Power Current meter; threshold alerts to stay safe. 14 AWG power cord.

AC power line surge protector. Protect high-tech electronic devices from damage caused by dangerous spikes/surges that coming from AC power line Protect high-tech electronic devices from damage caused by dangerous spikes/surges

Equipped with circuit breaker for overload protection.

Vertical mounting capabilities

Remote management capabilities

Load indicator LED

AC input range for domestic or international use

Built-in Short circuit, overload, and over voltage protection

Cooling by free air convection

Remote Management Capabilities

Local Current Monitoring Display

Alarm Thresholds