Best Powersports Control Cables in 2025

High quality,long lasting flexible cables The 33C type are suitable for outboard- inboard and stern drive engines.They are ideal for high perfomance application and long cable runs and complex routings.

The innovative core design maximises the efficiency and minimises lost motion, while teh exclusive design of the conduit provides extremely high level of flexibility.

High flexibilty for reduced bend radius High efficiency for smooth operation

【22mm Twist Throttle Accelerator Handle Grips】Compatible with mini bike baja mb165 196cc 5.5hp, compatible with most of 50cc, 90cc, 110cc 125cc 140cc 150cc 200cc & 250cc 4-stroke dirt bike.

【Includes】This handlebar replacement set includes：1* 1.2 m throttle line , 2* left and right handles , 1* throttle aluminum block, 1* flameout switch.The throttle cable assembly is easy to install, used in almost any bikes applications.

【ON/OFF switch Standard Rating】: DC12V/10A , Cable Length 45cm With Two connectors.throttle cable,twist throttle,twist throttle cable,twist throttle,monster moto mini bike throttle cable,dirt bike throttle assembly,pit bike twist throttle,mini bike throttle cable,bike throttle cable,throttle grips,mini bike throttle cable.

New

Length: 13FT, 3.962Meter, Color: Blue

Universal type 3300/33C

It replaces Yamaha ABA-CABLE-13-GY .

Length: 10FT, 3.048Meter, Color: Blue

Universal type 3300/33C

It replaces Yamaha ABA-CABLE-10-GY.

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 30" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

OEM direct-replacement type cables are designed to fit Johnson and Evinrude engine control heads which use a proprietary control connection. This cable does NOT come with connection ends. These cables replaces Johnson / Evinrude 400 type cables.

Drop-in replacement cables are engineered as replacments for original equipment cables. Cables use the existing connection componets. Stainless steel and brass fittings.

Standard cables use stainless steel Lubri-Core core wire for smooth operation and long life. 8" minimun bend radius. Black HDPE outer casing for durability and best resistance to UV and chemicals.

Length: 17FT, 5.18Meter, Color: Blue

Universal type 3300/33C

Specifications: 92mm stroke, 200mm bend radius

FITMENT: This throttle & idle cable set for 2007-2010 Harley 2007–2010 Softail Custom FXSTC,Softail Deuce FXSTD,Night Train FXSTB ,Softail Standard FXST 14" Handlebar and 2000-2006 Harley touring without Cruise Control 12" handlebar

PREMIUM QUALITY:The throttle and idle cable set is with black vinyl coating has a sturdy construction that enhances riding safety. It comes with a high-quality inner cable for smoother shifting, and the chrome plated finish on both ends of the cable keeps it looking good for a long time. We offer two colors, black and silver, so you can choose the one that best matches your harley modification style

SIZE OPTIONS:These idle cable housing lengths are 42.3"for you to add taller handlebars and risers to your harley. Our throttle cable set comes in multiple size options, including 12", 14", and 16" handlebars, to ensure a worry-free installation process. This throttle cable set is strictly quality controlled to make it a precise size and a perfect fit for your harley motorcycle

Size: 24ft / 7 Meter / 276 inch. Color: Black.

Application: Fits for Yamaha, for Honda, for Suzuki, for Nissan, for Tohatsu and for Chrysler outboard engines.(But not for Mercury.) The cable needs to use the existing connection components. Please measure and compare the original cable length and connector before ordering, especially the connector.

Good Replacement: Made of stainless steel and rubber, long lasting cables. Rust resistant, wear resistant, corrosion resistant, durable and long service. The Flexible cable ensures sufficient bend radius for smooth easy shifting.

50'' Throttle Cable Fits for Coleman Powersports 196cc CT200U CT200U-EX Mini Bike Scooter

Fits Mini Baja MB200 200cc 6.5hp and Mini Baja MB165 196cc 5.5hp

Compatible With 50cc 70cc 79cc 79.5cc 80cc 97cc 110cc 125cc 140cc 150cc 196cc 200cc 212cc 250cc 4-stroke dirt bike, mini bike, pocket bike.

Length: 20FT, 6.10Meter

It replaces Yamaha ABA-CABLE-20-GY.

Specifications: 92mm stroke, 200mm bend radius

Thumb Controller fits 7/8" (22mm) handle bars.

Fit for 50cc 70cc 90cc 110cc 125cc 150cc 200cc & 250cc ATV which have 7/8 "handlebars, such as TaoTao, Buyang, Coolsport, Lifan, Kazuma, SUNL, Redcat, eagle, etc. Notice: Please ensure this part fits for your motorcycle before order.

Cable Length 46.5" (1180mm) Metal part without the casing is about 2.36"(60mm)

Part Number: GY21983 GY21307 GY21623.

Compatible for John Deere 107S D100 D105 D110 D120 X105 X115R X125 X145

This is Brand New and High Quality Product, Meet the professtional specification for stable performance and durable

Size and Color: Length: 6 Meter/20ft/236inch; Thread Size: M5x0.8 or 10-32 UNF; Color: Blue, Silver Tone.

Application: For Outboard Engine Boat Motor Steering System, etc.(But Not for Yamaha) Please measure and compare the original cable length and connector before ordering, especially the connector.

Good Replacement: Made of stainless steel and rubber, long lasting cables. Rust resistant, wear resistant, corrosion resistant, durable and long service. The flexible cable ensures sufficient bend radius for smooth easy shifting.

√【Replacing Part Number】:946-05098, 946-05098A, 946-05098B, 946-05098C,746-05098, 746-05098A, 746-05098B, 746-05098C

√【Product Type】:Fit for XT1-GT 50, XT1-GT50, XT1-GT54 FAB, XT1-LT46, XT1-LT46 FAB, XT1-LT50, XT1-LT50 FAB, XT1-LT54, XT1-LT54 FAB, XT1-ST54 FAB, XT2-GX54 FAB, XT2-LX42, XT2-LX46, XT2-LX50, XT2-ST54 FAB

√【Easy to Install】: Easy to install and remove, can directly replace old or damaged throttle cables, saving you time and money

Carburetor Throttle Return Spring Kit Speed Control Governor Link Rod Cable Spring for Honda and clones part# 16561-Z4M-010 16555-Z4M-000 16562-Z4M-000 16592-ZE1-180

For Honda & clone Predator Coleman Baja Champion Generac Duramax Duromax GX 160 200 model 159cc 196cc 208cc 212cc 224cc Predator 212 4hp 5.5hp 6.5hp 7hp 168 168f 170 170f etc. carb spring linkage, governor springs.

Please check the sizes shown on product images because Honda Clone parts may vary in details. Springs may have small tolerance.

Throttle Control Cable Compatible with John Deere GY21107 Throttle Control Cable

Throttle Control Cable GY21107 Compatible with John Deere LA135 LA145 LA155 LA165 LA175 X140 Lawn Tractors

Details: LA135 after serial number 200,001; LA145 after serial number 200,001; LA155 use with engine marked 40H777-0456-B1; LA165 after serial number 200,001; LA175 after serial number 200,001; X140 after serial number 023,204

Perfect Match: Compatible with Suzuki GSF 1200 Bandit (2001-2006)/ GSF 1200 S Bandit (2001-2005)/ GSF 1200 SZ Bandit ABS (2005-2005)/

Produced according to OEM standards and in original sizes.

High quality and durable cable. Made to original equipment specifications and exactly for a perfect fit. We use high quality outer wire with Teflon and durable inner wire with corrosion-retardant alloy in production.

Condition: New

Manufacturer Part Number:663-48344-00

New parts CABLE END, REMOTE CO, 6FM-48344-00-00 is used

Replaces Part Number: AM136026.

Compatible for John Deere X500 X520 X540, for john deere lawn mower parts

Compatible for john deer: X500 serial number below (-030000),X520,X540 serial number below (-020000) or above (030000-)

Purchase reference ---Engine cable end is replacement for 6‑300HP outboard motor shift throttle 1984‑2012, perfect matching.The part number of remote control throttle cable end is 6E5‑48344‑00, according to original design.

Function--- The remote cable end is professionally manufactured, according to the original standard, with stable performance and high reliability. And it's adaptable for excellent stability and durability in all conditions.

Product material---The remote cable end is made of ABS material, which has the characteristics of durable performance, high temperature resistance, anti-aging, etc, and has undergone fine surface treatment to ensure reliable performance and long service life. Our remote cable ends are more reliable, safer, and are Your ideal choice.

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 60" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

Application: Compatible With Hustler Zero-turn Mower 60”, Fits model Super Z, Super Z HD, RD Super Z HD, Super Z EX, X-ONE and Super 104.

Function:To replace the old throttle control cable for the mower, you will control the mower engine speed more efficiently and safely.

Replacement for Genuine OEM Part: 603409 throttle cable, 16670 throttle control cable.

Perfect Match: Compatible with Kawasaki EN 500 A (1990-1993)/

Produced according to OEM standards and in original sizes.

High quality and durable cable. Made to original equipment specifications and exactly for a perfect fit. We use high quality outer wire with Teflon and durable inner wire with corrosion-retardant alloy in production.