Best Conrader in 2026

Pilot Unloader Valve For Air Compressors 1/4" Male NPT inlet - 1/8" outlet

Manual Hand Unloader

30-40 PSI Adjustable Up or Down

__ PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES.

ALL BRASS CONSTRUCTION AND BUILT FOR THE RIGORS OF OUTDOOR GAS COMPRESSORS.

30 CFM FLOW RATE, PSI'S ARE PRE-SET FROM THE FACTORY AND CAN BE ADJUSTED ON THE PILOT VALVE.

1/2" FPT TOP Inlet x 1/2" Female Pipe Thread outlet - 18 scfm - w/ hand unloader

95-125 psi - (check out our throttle control cables for gas compressor listings)

Free Shipping

Used on gas engine and electric compressors to operate the system constant speed

Use on compressors that have head unloader systems

Can be used in conjunction with a Bullwhip throttle control to control gas engine speed

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 30" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 24" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 48" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

Cable Throttle Control, Fits Engines 8HP Minimum to 14HP Maximum. 60" Cable

Cylinder has 1/8" Male NPT thread to connect to the throttle control port on your unloader pilot valve.

The cable end is a Z type that will connect to the throttle arm on your engine.

1/4" female national pipe threads

Both ends lock on valve core threads

Maximum pressure of 150 pounds per square inch

Ideal for replacing air compressor drain cocks

High quality, O-ring free construction

Pre-applied thread sealant for airtight connections

Pneumatics

Manufacturer: Guardair

Country of Manufacturer: United States

POWERFUL AIR FLOW - Perfect for blowing floor debris, cleaning masonry forms, tanks, ovens, molds, and rafters, as well as machinery and storage areas.

OSHA COMPLIANT - Venturi nozzle boosts thrust yet limits static pressure to less than 30 psi should the tip become blocked.

ERGONOMIC HANDLE - Pistol grip-style handle provides maximum user comfort for short or extended periods of cleaning.

Product 1: Compressor/Air Tool Features: Fastener Collation,Fastener Depth Control, 1 1/2 inch to 3 1/2 inch framing nailer; 1,050 inch pounds of driving power; sequential and bump trigger

Product 1: 2 nailers in one: includes 2 quick change nose pieces, converts to framing or metal connector applications

Product 1: Lightweight magnesium housing; integrated rubber skid pads; rubber grip

2-in-1 multi-function 175 PSI ASME certified air tank

Fully assembled and ready to use

Can be used in either a horizontal or vertical orientation

[POWERFUL AIR FLOW] new design inner supercharging construction and lengthened tapered air flow nozzle for high volume powerful blow off.

[DURABLE CONSTRUCTION] high pressure resistance copper alloy adjusting nut , high-impact stainless steel air flow nozzle, anti-break chromed zinc alloy body, improved designed sealing components, more reliable and durable.

[EXTENDED LONG REACH EDITION] maximum extended size is 26 inch, with extensible 14-21 inch air flow nozzle allows access to hard-to-reach slot areas.

Powerful air flow,new design inner supercharging construction and tapered air flow nozzle for high volume powerful blow-off.

All metal construction, high pressure resistance copper alloy accessories (valve screw,nozzle,quick coupling),anti-break silver chromed zinc alloy gun body ,improved designed sealing components,all these make a reliable and durable industrial air blow gun.

Adjustable Air Flow Nozzle allow you to control air flow as required,2 other steel&copper air flow extension with protective tip,easy to reach tight areas and make sure the safety of delicate or sensitive areas.

Blow stubborn debris, dust, water, and more off of all kinds of materials and machinery with this powerful air blow gun with 150 maximum PSI

Control the air flow by turning the flow control knob conveniently located above the handle

Get to hard to reach areas with the extra-long 4.5 in. nozzle

SAFE ON SURFACES - Mar-resistant rubber tip and safety tip helps avoid knicks/scratches on paint or other fine surfaces.

VERSATILE - Ideal for removing debris, drying off fluids, blowing out air lines, easy project clean-up, and offering a tight and leak-proof fit in narrow spaces.

SPECIFICATIONS - Maximum of 150 PSI. Rubber Tip has a maximum 12.9 SCFM at 100 PSI. Safety Tip has a maximum 11.7 SCFM at 100 PSI.

New And Improved Internals

Valve Design Makes This Blow Gun More Convenient, Faster, And Easier To Use For All Applications

Comfortable Lever Control And Insulated Handle

EASY INSTALLATION – From the moment you start operating our industrial quality compressed air piping system you will enjoy its trouble-free safe operations. But first, you will like the easy installation of our air compressor hose kit. Just have a plan as to the location of the air compressor and where you are going to mount the compressed air outlets, follow the step-by-step instructions we provide, and very soon you will have it seamlessly up and running.

NO LEAKS AIR SYSTEM – We offer a complete leak-proof compressed air supply solution for your shop or a garage, rolling up to 100 ft. Smooth interior walls of our piping rolls will never build upscale or rust. It is much more efficient than iron or PVC piping, and while reliably holding pressure, operates at 200 psi at 73F and 160 psi at 140F.

EASY TO CUT AND TERMINATE – No more pipe cutting, messy threading, or gluing! We provide you with a simple tool to make it effortless. MaxLine Master Kit has all components necessary to complete the installation.

Includes (19) essential air accessories and a 25-foot recoil air hose

Blow gun with (4) inflation nozzles and (2) sport ball inflation needles

2) heavy duty brass quick couplers

A great starter kit for inflation and tool connection

1/4 inch NPT (F) (M)

17 piece kit

Dual-head air chuck for tire inflation and pencil tire gauge ensures tire properly inflatored

Quick and easy connect system: 1/4" industrial quick coupler and plug

Air blow gun with safety nozzle /needle.

The AI303 Air Compressor Water Separator filters out contaminants through the reusable 1 micron filter element, which is easily flushed out through the push button drain valve.

Compared to other Air Compressor Filters, the LE LEMATEC AI303 provides a broad operating PSI range of 2-150 PSI with little to no lost pressure so you get the desired pressure delivered to your air tools.

The air dryer for compressors. features a one way valve protecting air tools from dangerous backflow keeping your equipment in perfect working order.

Powerful Air Flow, new design inner supercharging construction and tapered air flow nozzle for high volume powerful materials blow-off. A reliable air compressor accessory tool.

All Metal Construction, high pressure resistance copper alloy valve, anti-break chromed zinc alloy body, improved designed sealing components, more reliable and durable.

Extended rubber protect guard aluminum air flow nozzle allows access to hard-to-reach areas.

WATER SEPARATOR: Add this air-tool accessory to your shop or garage to stop moisture, water, oil, and particles from entering air-spray guns and air-compressor tools. You can also add it to your compressor hose to keep the equipment working efficiently.

OIL SEPARATOR: This spray-gun unit separates the oil from the air as it goes through your air hose. The oil stays inside the compressor to keep it lubricated while the compressed air stays free of oil, ensuring maximum air output to your air tools.

OPTIMIZE PERFORMANCE: Available in 90 PSI or 150 PSI versions, this oil-water separator traps water vapor and dust to maximize performance for cleaner and more even jobs, saving you countless dollars in replacing expensive air tools.

WATER SEPARATOR: An essential air tool accessory for mechanics and craftsmen that stops moisture and particles from entering air spray guns and other air compressor tools to keep your equipment in top performing shape.

OIL SEPARATOR: This air filter unit separates the oil from the air as the oil needs to stay inside the compressor to keep it lubricated while the compressed air needs to exit the compressor free of oil to ensure maximum air output to your air tools and increase reliability and lifespan.

MAXIMIZE PERFORMANCE: The water oil separator traps water vapor, dirt, and dust to maximize the performance of air compressor tools for cleaner and more even jobs providing excellence in execution and saving you countless dollars in replacing expensive air tool equipment.

REDUCED FATIGUE - Ergonomically superior aircraft aluminum gun body for maximum comfort and control

MAXIMUM FLOW - Equal to or greater than the competition

MODULAR ACCESSORIES SYSTEM - Customize the gun extension length and tips for every application

➤ Advanced Air Compressor Tool Kit – This 22-piece compressor accessory set includes a long 25ft recoil poly air hose, tire inflator gauge, heavy duty blow gun nozzles, 360° swivel connector, swivel plugs, couplers, inflation needles, and more.

➤ Heavy Duty Craftsmanship – Designed for personal or professional-grade mechanic use, our fittings, connectors, plugs, and tools are crafted with premium brass, recoil poly, and corrosion-resistant steel, respectively.

➤ Flexible, Lightweight Recoil Poly Air Hose – Offering more control and versatility over a standard air compressor hose, our 1/4” x 25ft recoil poly hose with ¼” FNPT and MNPT couplers offers 120 PSI of stable pressure.

PERFECT FOR ANY TOOLBOX - 2 PRY TOOLS, 2 EASY CARRY TOTE BAGS INCLUDED! Great for multiple jobs and applications such as, Precise Alignment and Leveling. Air lift non-marking shim for window, door, cabinet installations, appliances, HVAC, plumbing.

SAVE TIME AND MONEY - Allowing a single installer to do the job of many. Our Shim Bags will help hold in place and level counter tops, door frames, window frames, cabinetry, and more!

COMMERICAL DESIGN, CONSUMER PRICE - With rounded corners, stiff durable edges, smooth exterior and internal stiffener for easier insertion, our wedges are designed for ease of use. Quick easy push button air valve for precise leveling with one finger. FITS into tight 3/32 inch gaps and opens to 2 1/2 inches wide with one hand pump operation. 300 POUND load rating for maximum weight capacity.