Best Blue Powersports Grips in 2026

🏍FITMENT--Inner Diameter(L/R)-22mm/24mm.This mx grips will universal fit 7/8" bars or oversize bars that taper to 7/8" at bar ends,fit for most dirt bikes,such as,XR CR CRF YZ YZF WR WRF KLX KX KXF EXC SXF XC XCW WCF RMZ DRZ

🏍GRIPS FUCTION:Dirtbike hand grips can reduces vibration and cushions hard impacts,relieve your hands fatigue,and the pillow top hand grips have a self-cleaning pattern,it's especially great for MX when you don't have time to stop and clean your hand grips

🏍MADE WITH HIGH QUALITY MATERIAL:Our motorcycle grips constructed of rubber gel material,the pillow top grips offers a tacky gel-like surface compound and a harder inner core compound that enhances the bonding interface with the bars.ANTI-Rip Tip uses denser compound to increase life of the grip

Fitment: The motorcycle handlebar grips come in two packs, one right handlebar 1" (24mm) for Thruster and one Left Handlebar 7/8" (22mm) for Clutch. It fits most off-road bikes.Note: The two motorcycle handlebar grips are the same size except for the inner diameter of the hole size is different.

High quality material: Our pillow grip is made of high quality and strong rubber gel material, specially made for hand twist throttle, which brings excellent absorption for strong vibration and provides great comfort and touch.

Special design: Featuring a full waffle design, single density reduces vibration, arm pump and fatigue, the radial grip offers a dependable feel many top racers have come to expect.

Feature:LEFT side is 7/8", RIGHT side is 1" for twist gas throttle.

Handle Grips Color: Black, Red, Blue, Silver, Gold,Green and Gray are availale.

Material: Material: CNC Machined Aluminum + None-Slip Durable PVC Gel Rubber,it make your motorcycle attractable.

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Comfortable Grip: Made of TPU rubber, provides excellent shock absorption and great comfort and feel, feels good while riding.

A new stylish design, enhance the look of your bike with these hand grips.

Easy installation allows grips to be changed in seconds,durable to use, perfect size make the handlebar grips hold completely firm.

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Size: left(bar side) hole: 22mm (7/8"); right(throttle side) hole: 25mm (1"); Overall Length: 5 3/8" (13.5cm).

Non slip design, provides smooth throttle tuning and better control.

PVC gel rubber material, aluminum bar end cap.

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

Motorcycle Grips Material : CNC Machined Aluminum + None-Slip Gel Rubber

Handlebar Grips Color: Black, Red, Blue, Silver, Gold, Titanium and Green are available

LEFT side is 7/8", RIGHT side is 1" for twist gas throttle;Will not fit ATV with thumb throttle, if you put them on ATV, you may need get 2 Pairs

★ 7/8"(22mm) Universal Motorcycle Grips Hand Grips fit for most motorcycle dirtbikes with 7/8" standard bars. It has 9 different colors, Red, Black, Orange, White, Dark Bule, Dark Green, Green, Gray, Yellow.

★ Ergonomic comfort handlebar grips design, you will feel good after long time riding. It is very lightweight, soft, shock-resistance. The checkerboard’ design increases friction between our hands and grips，even in rainning day，it is very non-slip.

★ Included 1x Pair of Bike Handlebar Grip, it is very easy to install.

Size:Left 22mm (7/8"); Right 25mm (1");Bar Length:12cm

Material: CNC Machined Aluminum + Non-Slip Rubber Gel

Package:1 Sets (Left & Right) Hand Grips,Comes with Bar End Insert

Set of two (1 Left 22mm + 1 Right 25mm) handlebar grips. High Quality Billet Aluminum

IMPORTANT: Right Side grip opening is bigger (25mm), so it can hold Throttle Cable Sleeve

Premium Soft Rubber Grip and High Quality Billet Aluminum Casing

Non-Slip Soft Rubber: Made of high quality rubber,soft,shock-resistance,equipped with slip-free performance,low temperature resistance.

Size: 7/8”/22mm left Inner diameter handlebar grips and 24mm right inner diameter handlebar grips, please make sure the size of your motorcycle handlebar before purchase.

Feature:The motorcycle Handlebar Grips could eliminates vibration and cushions impact while riding;Easy installation, allows grips to be changed in seconds.

【Anti-slip, Wear-resistant and Flexible】Anti-slip bump design, increase anti-slip performance, reduce product wear and fix more firmly. The heated motorcycle grips pads fit under your grips without causing any loss of control cause they're flexible and aghesive. Perfectly fit any handle bar, Keep your hands warm in cold weather while riding.

【Strong Applicability】 The Motorcycle Electric Heating Handlebar Covers size is 4.25 inch * 5.63inch, and the USB cable length is 56.69inch. Suitable for electric vehicles and motorcycles with a handle diameter of 20-30MM ect.

【3 Position Switch】You can accurately adjust the grip temperature to make the heated grips work perfectly at different temperatures. (45 ℃ -Red/ 50 ℃-Green/ 55 ℃-Blue) Handlebar hand warmers designed with revolutionary heating structure delivers heat faster than ever and then can heat up faster and warm your hands.

High-Quality Materials: This pair of handlebar grips is made of high- quality rubber, comfortable, no-slip, safe and durable.

Universal Models: They are the universal type of most 7/8 inch left handles and 1-1/8 inch right handles, suitable for Yamaha, Harley, Honda, Suzuki, Kawasaki, Hyosung, Victory, Indian, Bsa, Triumph, Aprilla, Bajaj, Benelli, Vespa, etc.

Anti-Slip Performance: The full diamond pattern maximizes the grip of the hands, reduces operating vibration, increases the friction between the palm and the handle, and reflects the professional anti-slip performance in rainstorms and relieves the fatigue of your hands.

Excellent Rubber Material: This grip is made of high quality rubber, which is fits perfectly and have good hand stick, durable to use, corrosion resistance, low temperature resistance.

Function: This handlebar grips are designed with anti-slip on the surface, make it easier to tun and control the throttle, make your driving more comfortable and easier.

Note: The Left Handlebar grip Inner Diameter is 7/8''/22mm, The Right Handlebar Inner Diameter is 1''/24mm, please make sure your motorcycle handlebar is 7/8'' and 1'',thanks very much.

【Fitment】 ✔For Kawasaki ZX-10R ✔For ZX-10R Performance ✔For ZX-10R KRT ✔For ZX-10R SE Performance ✔For ZX-10RR ✔For ZX-10RR Performance ✔For ZX-10R SE

【Material】 Aluminum Alloy + Rubber. Aluminum offers the grip eight available colors to fit your bike. Non-slip rubber designed provide drivers security escort.

【Package Included】 A pair of Handlebar Grips with Grip Ends (Left:22mm & Right:24mm)

Service - Please contact us if there any problems with the product. We can provide exchange service to you. You can purchase it without worries.

Fitment - Universal fits for most of 7/8 inch handlebar motorcycle models, suitable for Harley, Honda, Yamaha, Suzuki, Kawasaki, Hyosung, Victory, Indian, Bsa, Triumph, Aprilla, Bajaj, Benelli, Vespa and most other models with 7/8 inch handlebar. It is not specific designed for any bike.

Material - These dirt pit bike grips made of non-slip rubber, the rubber hand grip bar is durable, corrosion resistant.

100% Brand New

Engraved Letter Ninja 300 400 650 250 1000 ZX6R ZX10R ZX12R ZX14R

Universal fits most motorcycles 7/8" bar end; Please check your bike before ordering

【Fitment】✔For ZX-6R ZX6R 636 ABS

【Material】 Aluminum Alloy + Rubber. Aluminum offers the grip eight available colors to fit your bike. Non-slip rubber designed provide drivers security escort.

【Package Included】 A pair of Handlebar Grips with Grip Ends (Left:22mm & Right:24mm)

Fits: Green Twist Alloy Throttle Black Handle Grips For XR50 CRF50 CRF70 KLX110 SSR Thumpstar YCF Pit Dirt Bike Motocross Motorcycle

Guaranteed Good Quality & Made From the Highest Quality Materials Available

Always Responsible Customer Service

Condition: 100% Brand New.

Will Fit all 1" (25mm)Standard Handlebars

Corrosion resistance, low temperature resistance, non-toxic and tasteless