Best Dirt Bike Powersports Turn Signals in 2025

[MATERIAL]: 24 gauge teflon coated wire leads with black heat shrink sheathing, make sure wrap-around LED turn signal stay in place even on the hottest summer day

[DURABLE]: With 3M double side adhesive mounting tape on back and Zip Ties for added strength

[GOOD DESIGN]: 120 degree viewing angle for wider visibility, more secure and brighter. Can work as turn signals, running, license plate lights, etc.; Waterproof & Sleek

32SMD high brightness 2835 LED chips per lights for maximum illumination. Working Voltage: 12V.

Supports four functions: Running Tail Light, Bake Light, Left Turn Signal and Right Turn Signal Lights.

All-in-one design. Perfect for Motorcycle Scooter Quad Cruiser Off Road etc. Easy Installation: Mount with 3M tape, 5 wires connection.

L.E.D. blinker illuminates bright Amber light.

Universal design makes use for all recreational vehicles.

Easy installation with small bolt-on design.

Compatibility: 12V 12 LED Motorcycle Flowing Turn Signals Indicator Light.

High quality: Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.

New features: New version of the turn signal adds daytime running lights and brake lights. Notice: When the Turn Signal is on, the Daytime Running Light or the Brake Light will turn off; When the Turn Signal is Turned off, The Daytime Running Light or the Brake Light will Returns to its birghtness.

【Compatibility】Fit for all motorbikes with 2 inch bullet style led turn signals. Such as Compatible with Harley Dyna, Street Glide, Road Glide, Fat Boy, Softail, Road King, Springer, and other models. Note: If the LED can not flash or HYPER FLASH, it is need resistors for the turn signal to correct the flash rate back to normal.

【1157 Front 1156 Rear Turn Signals Kit】Switchback mode, front LED turn siganls: outer white halo ring for running/day driving light; center amber light for turn signals, outer halo ring will automatically turn off when turn signal light up. Rear turn signal: all lights flashing for rear turn signal. NOTE: Only for bullet turn signals with front 1157 double contacts, rear 1156 single contact. Please check the socket of your bike carefully before purchasing.

【Waterproof & Durable】Smooth and transparent surface, hard and durable ABS plastic material, protect led bulbs from dust, dirt and minor impact effectively. Built in diode bulbs, lower power consumprion, maximize your visibility, greatly improved your driving safety at night or raining days. An ideal replacement for an old or dim lights.

【4PCS Turn Signal Lights】Comes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road

【Unique Flowing LED Lighting Design】Y Shape，Equipped with 12LED, Amber Color and Flowing Mode, Cool Design, Great for Turn Signal and Indicators Usage

【Water Sealed】IP65 Waterproof, Material in Durable and Waterproof Plastic, Make it Resistant to Water Damage

2 Application in 1 Light: This light can use as Handlebar end light and turn signal. Fit most motorcycle with 22 mm handlebar or with 10mm thread ,such as for motorbike scooter dirt pit bike quad ATV cafe racer cruiser chopper bobber for kawasaki suzuki yamaha bmw harley and etc.

Alloy Aluminium Housing : The casing are made of hight quality aluminium material that with good peformace of heat dissipation, and also long-turm durability ,safety and reliability.

Super Clear Lens and 12 LED Light: The lights are very bright and since they are visible for 360 degrees.

Universal Compatibility: 8mm mounting bolt, used for most DC 12V motorcycle specially compatible with harley street glide softail road glide sportster, honda gl1800 vt600c vt750c2b, kawasaki en500, suzuki m109r, triumph bonneville thunderbird, yamaha roadstar

Super Bright and Integrated Design: Equipped with 4pcs high power SMD LEDs per blinkers, mini size but much brighter than halogen bulbs, bright light output makes you more noticeable when driving to increase safety. Yellow function as turn signals, bright red as brake light and dim red as tail light. IC controlled, no higher flashing

Waterproof: Made of high quality glass lens and painted black metal housing, anti-corrosion and anti-scratch. sealed well on the edge, water tight, stay illuminated in extremely hot, cold, rainy or snow days. Best replacement for old dull indicator

Solid construction, smooth and polish surface.Suitable For: 30-45mm Front Fork

Easy to Install--No modification required. Install the brackets to the fork and shock bolt, adjust the position, screw the nut back, then install your motorcycle blinkers.

Universal--Fit for most of motorcycles,such as Yamaha, Honda, Kawasaki, Suzuki, Triumph. Complete light clamp Kit Used to Relocate the Front Turn Signals.

FITMENT: Great for your UTV, golf cart, dune buggy or 4x4 project. Also, fits many Polaris Rzr and Ranger and models.

EASY INSTALLATION: These 3/4" round LED lights are about as simple as it gets when mounting lights. Simply drill a 3/4" hole and push these little guys in. BAM! It's that easy! Includes installation kit with instructions and diagrams

LEGAL ON THE ROAD: All components needed to install a Street Legal Kit.

Left side control switch + 2 pin flasher relay + 12V round horn speaker ; Compatible for Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as well.

Works perfectly with 12V Motorcycle Motorbike LED Turn Signal Indicator Blinker Amber Light.

It has turn signal switch, horns switch and hi/lo beam switch, fit all 7/8" handlebars and 125cc motorcycles(not compatible with Harley, Sports Cars, etc).

🔶【Flowing LED Turn Signals】Acelane Y-shaped LED Turn Signal Lights, amber color with flowing mode, offers you eye-catching brightness in dark. Multiple use, can be used as turn signal lights or daytime running light, greatly increase your driving safety.

🔶【Durable & Bendable】Made of high quality ABS plastic housing with flexible & bendable rubber to effectively prevent accidental falls for lasting performance. This 4pcs led indicators set is well-constructed, lightweight with bright chips, making a perfect replacement for your original turn signals.

🔶【IP65 Waterproof】Water-sealed & dustproof shell to ensure its waterproof performance to handle harsh weather like rain, storm, ice, snow, sandstorm, foggy, haze, etc. Our flowing turn signal lights provide extra safety from water damages on your driving journey.

2-pin Electronic LED Flasher is also speed adjustable. Allow LED bulbs to blink at the normal rate

Can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m

Completely waterproof design;Directly replace the OEM two-pin flasher,Eliminate the need for tapping wires to install the load resistors,Works for most motorcycle/bike to fix the LED bulbs related turn signal light hyper flashing, not function properly issues.

Alloy Aluminium Housing : The casing are made of high quality aluminium material that with good performance of heat dissipation, and also long-turn durability ,safety and reliability

2 IN 1 APPLICATION: It can be used as the handlebar end light and turn signal. Fit most motorcycle with 22 mm handlebar or with 10mm thread. Note: Earlier model motorcycles need to load resistors to prevent hyper flashing

EASY TO INSTALL: 3-Wire Design, the Black wire: negative, Red: Turning (Amber Color), White: Running(White Color). Simple installation, minor modification may be required

💡What You Get: You will receive 2 pieces Amber Motorcycle Turn Signals ,which are bright enough for your driving and make you safe in your life!

💡Multi-Function: 2-wire connection, can be used as front or rear turn signals, easy to install. 28pcs super bright LED lights, faster on/off response for maximum safety.

💡High Performance: Made of high-quality and long-lasting materials, water-proof, anti-rust and corrosion-resistant, upgrade the safety factor and provide a super comfy driving experience, suit for most of environments including rainy / snowy / fog days.

Package contents: you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member

Ultra-bright brightness: mini stalk arrow light motorcycle turn signals lights is very small, with beautiful LED lights; It is composed of 14 ultra-high-brightness amber LED lights, which makes it safer to ride motorcycles at night

Parameter information: the working voltage: voltage of motorcycle lamp: 12V; Power: about 1.5W; Color temperature: 3500K; Service life: 50000H, can provide efficient and continuous brightness, and please check the related data carefully before buying

【Universal Compatibility】8mm mounting bolt, the turn signals fit for most DC 12V motorcycles motorbike scooter quad cruiser off road atv and dirt bike. Compatible with BMW Honda Kawasaki Suzuki Triumph Yamaha

【Super Bright】Built in 3pcs high power led chips per turn signal light that emit high-intensity lighting output. much brighter than halogen bulbs. Greatly improve the visibility on the front side and ground when driving at night. Moreover, your signaling indicators will more easily been noticed by oncoming traffic to increase safety. The better and safer it is for us and other motorists

【Easy Instllation】Two installation methods. If your original blinkers' mounting bolt is 8mm, just remove your stock turn signals and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signal lights to DIY your motorcycle to make you bike street legal

Fitment: Universal 10mm motorcycle turn signal, suitable for most motorcycles, fit for Honda Shadow Kawasaki Suzuki Harley BMW Yamaha Cruiser Bobber Chopper various models, please refer to the size/type before purchasing

Retro styling: bullet head styling, with bright silver chrome plating, classic round housing turn signal, can effectively reduce wind resistance, bring a more fashionable appearance, an excellent choice for upgrading motorcycle taillights

Long working hours: The turn signal adopts a high-quality wick, and the working time exceeds 30,000 hours. The light source is clear and bright, not dazzling, making driving safer

This light can use as Handlebar end light and turn signal. Fit most motorcycle with 22 mm handlebar or with 10mm thread ,such as for motorbike scooter dirt pit bike quad ATV cafe racer cruiser chopper bobber for Kawasaki Suzuki Yamaha BMW Harley and etc.

The casing are made of high quality aluminium material that with good performance of heat dissipation, and also long-turn durability ,safety and reliability.

The lens is super clear that lights are very bright and since they are visible for 360 degrees.

💗Universal 10mm motorcycle turn signal, suitable for most motorcycles, fit for Honda Shadow Kawasaki Suzuki Harley BMW Yamaha Cruiser Bobber Chopper various models, please refer to the size/type before purchasing.

💗Hollow shape: Hollow shape can effectively reduce wind resistance, bring a more fashionable appearance, an excellent choice for upgrading motorcycle taillights

💗Long working hours: The turn signal adopts high-quality LED wick, and the working time exceeds 30,000 hours. Amber light source, clear steering instructions, not dazzling, making driving safer

【Super bright】- These LED motorcycle indicators have 12 (335 LED) super bright LED beads, low power consumption, high brightness, and not easy to heat up. The motorcycle amber LED indicators are not only suitable for night driving, but also very bright and conspicuous in the daytime.

【Waterproof and durable】- Motorcycle turn signals has IP67 waterproof rating, which can be used in various bad weather conditions. Flexible rubber connection base is not easy to break, effectively prevent breakage. The wire is made of copper core, strong conductivity is not easy to get hot, high safety. The service life is up to 30000 hours, giving you a better product experience.

【Easy to install】- LED motorcycle indicators are suitable for most models and very easy to install. The black wire is the negative pole, the red wire is the positive pole, and can be installed directly on the original indicator. Install the product correctly to achieve the best effect.

DOT approved Turn Signals are exact replacements of complete OEM assemblies, at a fraction of the cost. Front Left Light

Turn signals meet or exceed all government requirements for light output and durability, and are legal for all street or dual-purpose motorcycles.

Fitment Specific

【COMPATIBILITY】12V Motorcycle Arrow Flowing Turn Signals Indicator Amber Light,Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Honda Kawasaki Yamaha Suzuki Off Road

【HIGH QUALITY】Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.

【ARROW FLOWING LED LIGHTING DESIGN】 Amber Color Light with blendable Design, arrow flowing mode Makes the motorcycle More Upscale and Higher Attention.

➤Fitment--This Led turn signals fit most 12V motorcycle/scooter/motorbike/E-bike/dirt bike/UTV/ATV,Such as for Harley Honda Suzuki Kawasaki BMW Chopper Cruiser Bobber Cafe Racer street sports bike with 10 screw hole.

➤2 in 1:This Turn signal include turning light and running light,energy saving LED lamp,Super Bright,long lasting, and safety attached, it will give you extra safety while motorcycle at night.

➤Material--This Light made of ABS Plastic with IP65 Waterproof performance,Durable and rust resistant.

FITMENT: Our motorcycle turn signals are suitable for most motorcycle models, such as Kawasaki Honda Yamaha Suzuki, etc.

FEATURES: This LED motorcycle turn signals are highly visible and recognizable, even in daylight.

MATERIAL: This LED motorcycle indicators are made of clear, sturdy ABS plastic housing that is waterproof for clear steering in the rain.

EAGLE LIGHTS LED TURN SIGNALS - Upgrade your old turn signals to LED! Easy to install and awesome looking! As easy as changing a bulb. On the front turn signals the outer ring of 7 LEDs illuminate for the running light. They are highly visible and a great upgrade for your bike being over 3X brighter than stock.

EASY INSTALLATION – With the Eagle Lights LED Turn Signals, upgrading couldn’t be easier. Our LED turn signals are plug and play on most Harley Davidson models. Installation typically takes about 5 minutes. Pop off the lens, replace it with your new LED turn signal, push the turn signal into place and go for a ride. Ride safer, look better, and ride longer with the Eagle Lights LED Turn Signals.

NEVER GO DARK - Our LED turn signals have a 7 LED halo ring mounted inside a trim ring. The front halo ring is 6000K and is a pure bright white light. The inner 24 LEDs are amber and function as the turn signal. The halo ring will turn off when the LED turn signal is active. For the rear, all 31 LEDs will illuminate red for the turn signal.

Compatible Models: Universal ATV UTV rocker switch turn signals street legal kit is compatible with Polaris RZR Ranger Yamaha Rhino Viking Kawasaki Teryx Can Am Commander Arctic Cat Wild Cat

Safe and Durable: Turn signal lights are an important tool for predicting vehicle dynamics. Amber turn signal light is the most penetrating light and can be seen in rain and fog, it help you get on the road safely and road-legal

Easy Installation: The UTV Street Legal Kit adopt plug-and-play design, all accessories are pre-installed. The wiring is simple and anyone can hook it up. The default connection is a vertical switch, if a horizontal switch is required, it can be replaced directly. You can also watch installation tutorials online

Each LED turn signals is powered by 1-Watt and is capable of producing super bright 320 lumens light output. Built-in 1 high power LED chip features red color dual brightness change. Additionally, thanks to a stylish projector lens that allows the beam of spotlight to be nicely shaped and more concentrated.

Each LED turn signals auxiliary light comes with 3 wires: one positive lights up dim red color for tail light/rear running light/DRL/driving light/side marker light/position indicator light, the other positive lights up bright red color for turn signal light/blinker/brake light/stop light, and lastly plus one negative ground wire. Meanwhile, you could also abandon the dim mode and keep it with no light function.

1 inch small and mini replacement with black painted aluminum body provides superior cooling capacity and extends the bulb's life span significantly to be over 30,000 hours. IP67 waterproof design allows it to be used in all kinds of weather, such as rain and snow.

★ Motorcycle Front Blinker LED ★ Including 1 lamp bead only, the front led lights is mini but super bright enough to noticed at night, and have double color lights: white for day-running & amber for turn signal; only suit be installed in front of motorcycle.

★ Waterproof LED Lights ★ High-quality front turn signal LED with aluminum alloy housing & PC lens is completely sealed. In the rainy day, storm, frog, or snow, the water-resistant lights is still well-function.

★ Easy To Install ★ With 3 wires: yellow wire for turn signal; white wire for day-running; black wire for negative.

Fitment: Fit for your UTV, golf cart, dune buggy or 4x4 project.

Easy to Install: Drill a 3/4" hole and push these little guys in. Easy to install for anyone with a basic understanding of 12v electrical systems.But professional install was highly recommend.

Note: It did not come with extra wire due to the different lengths required.