Best Wall Projector Mounts in 2026

Get your TV off it's stand and onto the wall in under 30 minutes with this DIY friendly full motion TV wall mount that does it all. Thanks to the helpful install manual and full assortment of hardware, it's compatible with almost every TV out there.

Extend, tilt, and swivel your TV exactly where you need it. Now you can catch up on Yellowstone from any seat in the room. Extends 16", and swivels up to 130º for the perfect viewing angle.

Compatible with studs 16" apart, and you can level the screen after install. Mount with confidence thanks to our UL listing. That means this bracket has been tested to hold 4x the weight rating without fail. 75" TVs up to 132lbs won't be a problem for this mount.

Application: Fits most manual or spectrum projector screen on the market. Support maximum loading weight up to 66lbs / 30kg

Quality: Made by high-quality steel 6 inches L-shape bracket will successfully hold your screen and allow the projector screen away from the wall

Adjustment: Adjustable hooks to securely hold your screen 1.5” to 5” from the wall. Allowing for corner, chalkboard or television clearance and eliminating keystone effect

UNIVERSAL MOUNTING: This projector bracket has been designed to be universal which means that it should fit any projector unit. If you are in doubt, please ensure you check the measurements to ensure it will fit the way you need it to.

SPECIFICATIONS: Maximum weight capacity is 13.6kg. The whole bracket measures 478-688mm long and 307mm wide. Please see images for an illustration of the sizes. Once fixed onto the ceiling there will be a gap of 478-688mm between the projector and the ceiling. Rotation is 360 °, tilt (forward and backward movement) is 180°, and Swivel (side-to-side movement) is 180°. This model is long in length and features an adjustable arm that can range between 478-688mm and can swing from side to side.

DESIGNED TO PREVENT OVERHEATING: The shape of this Duronic projector mount has been carefully considered and designed to ensure that vents on the projector mount are not covered or obstructed ensuring that only a minimal amount of the mount bracket sits flush with the machine. Additionally, it is made of aluminium which allows heat to dissipate naturally and much more effectively compared to steel which would poorly conduct heat and cause overheating.

Compatibility: Projector mount fit most of the projector in the market, applicable to distance mounting holes between 2" to 12.5”.

Heavy Duty: Support maximum loading weight 30 lbs/13.5 kg. Regular concrete and brick ceiling or wooden stud supported. NOTE: This mount does NOT support the vaulted ceiling and regular drywall.

Fully Adjustable: Tilt +/- 15 degrees and swivel +/- 15 degrees. Angle adjustment bracket allows 360 degrees of rotation. Low profile design for quick and precise projector positioning.

Universal 6" L-Brackets that mount to stud, dry wall, brick, and concrete walls, and feature hooks to hang your projector screen

Sturdy Steel Construction keeps your screen safely and properly secured

Adjustable Hooks hold your screen 1.5" to 5" away from the wall

【SIZE】The L Bracket is 10-inches with adjustable distance designed allow for projector screen to be mounted from 3” to 10” away from the wall. Holds Up to 75 lbs.

【HIGH QUALITY】 The Wall Hanging is single piece construction made of high quality steel with White Stain finish can be painted to match your wall or Décor.

【EASY SET UP AND STRONG】： This projector hooks designed allow Projection Screen Set-Up Away from Walls, Entertainments Systems, Furniture or Any Obstruction and Can Be Hung from Ceilings for Extended Drops. Holds Up to 75 lbs.

Universal Mount: The Universal Projector Mount fits the majority of mini projectors with 3 sizes of screw adapters with a length of 175mm/ 6.88in.

Screw Adapters Size: 3.9mm/0.154in, 6mm/0.236in, 6.35mm/0.25in.

Use Feature: Tilt Angle-90 degrees, Rotate Angle-360 degrees, Safety Load-5KG.

3-In-1 Universal Projector Wall Mount Bracket: 1. Flush Ceiling Installation, 2. Telescoping Arm Ceiling Installation, 3. Wall Installation

Universal design compatible with all monitors in the market. The mounting holes on projector must be between 8.85" and 12.40".

SolidFull-Motion Design - Pitch: +/- 15 degrees, Roll: +/- 8 degrees, Swivel: 360 degrees, Height Adjustment (ceiling installation): 5 inches to 25.6 inches. Extension from the wall (wall mounted installation): 16.9 inches to 25.6 inches. steel material with durable powder-coated finish (black)

3-In-1 Projector Wall Mount Bracket - ceiling installation, sloped ceiling installation, and wall installation

Compatible with projectors whose mounting holes are under 11.41" and weight under 30lbs (13.6kg)

Resistant to rust - ceiling part and projector mounting part are made of cold rolled steel, extendable pole is made of aluminium alloy

①Made of high quality aluminium alloy

②Rotatale head, easy to adjust angle

③Compact and portable mount, easy to install

Designed to mount your Desktop Computer, PC, CPU, Workstation, Computer Tower, UPS Unit, Uninterruptible Power Supply Unit, Battery Backup, A/V component, or other Electronic Device.

10H x 3W x 10D

Multi packs sold in 3, 5, and 10 per pack

High Quality: Crafted from premium quality and heavy duty steel to provide a reliable projector mount with maximum strength and support up to 33 lbs, so your projector can be better protected and fixed

3-In-1 Projector Wall Mount with Adjustable Length: Our projector mount could meet your different needs. The low profile projector mount is adjustable in length from 5.5 inches to 25.2 inches, and can be adjusted to any length you want, suitable for different size projector for Epson, Optoma, Benq, ViewSonic or other. Three installation: 1. Flush Ceiling Installation, 2. Telescoping Arm Ceiling Installation, 3. Wall Installation

Full Motion Adjustable Mount: The projector mount direction is fully adjusted with 30-degree tilt, 30-degree swivel and 360-degree rotation, hitting all the right viewing angles

Durable black finish, Loading capacity 66 lbs (30 kg)

Removable extension arm with variable height adjustment: 5" (without arm) and 16.9" to 25.6" (with adjustable arm)

The maximum distance between any two holes is less than 14.2 in/360mm in diameter; The minimum distance between any two holes is more than 9 in/230mm in diameter. The mounting holes on projector must be between 9" and 14.2".

✔ 『Shelves Size』The inside size(Actual storage size): 10.27 in*8.1 in*1.8 in (26*20.5 *4.5 CM). The outside size (Including decorative brackets): 11.2 in*8.1in*1.8 in (28.5*20.5*4.5 CM).

✔ 『High-Quality Materials』TV box racks are made of high-quality space aluminum. The surface is polished and anodized. It has the characteristics of full color, corrosion resistance, oxidation resistance, and do not fade.It is suitable for bedroom and living room.It can be used for storage and organization of routers, modem, DVD Player, projector, set-top boxes, cable box, remote control, Smart Speaker etc.

✔ 『Two Installation Methods』No Drilling installation is only suitable for walls such as ceramic tile, marble, solid wood, glass, smooth metal and other surfaces that are not easy damaged. Walls with easily damaged surfaces such as painted walls, wallpaper walls, cement walls, plasterboard walls, etc. need to be Drilling installed. Choosing the correct installation method can make the router storage rack more solid.

Qty: 2, Black Finish 12-inch L-Brackets allow Projection Screen Set-Up Away from Walls, Entertainments Systems, Furniture or Any Obstruction and Can Be Hung from Ceilings for Extended Drops. Two Section Set-Up Holds Up to 120lbs/6" or 80lbs/12"

Made for All Elite Screens Manual, Spectrum, Stectrum Tab-Tension, and VMAX2 Series Screens - Can be used with Most Any Other Brand Screen with D-Loop End Caps

Adjustable Depths Allow Perfect Projector Screen Set-Up or Allows for Chain Connection for Extended Drop Requirements in High Ceiling Installations (Chain Not Included)

Function: Compatible with most manual or spectrum projector screen on the market and suitable for home, office, classroom and other places. Support maximum loading weight up to 80lbs.

Not easy to fall off and safer: Our brand uses carabiner to install the movie screen, which can prevent the screen from falling off, which is safer and more beautiful

Adjustment: Move the mounting hooks along the 6 inch bracket to optimize the placement of your projector screen and we provide all the necessary hardware to get your screen up and hanging.

MINI PROJECTOR MOUNT: Short length just 7.87in/20cm, but strong enough. Perfect for mini studio, DBPOWER Epson, Optoma, VIVIBRIGHT, ViewSonic, InFocus Mini Projectors(one mounting hole).

ADJUSTABLE WALL HANGER: Quality Material, Carbon Steel. Around 11 lbs loading capacity with 360 degrees horizontal rotation projector mount head and 60 degrees vertically adjustable projector mount head.

ATTRACTIVE APPEARANCE: Nice appearance in wall white with solid construction and screws needed. Perfect for the Home, Office or Classroom.

PREMIUM PROJECTOR WALL MOUNT: Sturdy, stylish mounting bracket safely secures film and video projectors weighing up to 22.1 lbs / 10 kg. Built to perfectly project images onto your wall or screen

FULL MOTION TILT, TURN & ROLL: Spherical joint allows a huge range of movement for optimum positioning of your projector - turns 360 degrees and tilts 20 degrees. The horizontal arm is reversible, allowing you to mount your projector right side up or upside down. Easily move your projector vertically to the perfect height

UNIVERSAL COMPATIBILITY: Fits virtually every projector. Works with home theater, business, gaming, pico, mini, LCD, LED, laser, DLP, LCoS, and HD projectors. Compatible with all brands, including Sony, Epson, ViewSonic, LG, Optoma, Sharp, and others

WONDERFUL ADJUSTABLE: Our Angle Adjustable Ceiling Projector Mount has 360-degree rotatable head with a ball bearing. You can easily adjust your projector to your favorite angle for perfect vision.

COMPATIBLE WITH MOST PROJECTORS: With universal 3 sizes of mount heads (0.153in, 0.232in, & 0.25in) and screws, both the two projector mounts can fit almost all projectors on the market.

PREMIUM & DURABLE: Made of high quality aluminum alloy, both projector mounts are super durable & wear-resistant. They can last long and still look new.

Projector Mounts made of high quality aluminium alloy. If your projector is less than 11lbs and has one hole in the projector bottom will be suitable. Please don't buy it, if your projector hasn't a hole.

Projector Wall Mount Loading capacity 11 lbs (5 kg), Telescopic tube diameter is 1.2 "(3cm), with extension pole, height adjustable from 11.8" - 19.7" .

Swivel your projector 360 degrees to meet a myriad of needs and desires.

Solid Steel Construction makes this universal ceiling and wall projector mount able to support up to 44 pounds. Enjoy optimal viewing angles with peace of mind, knowing that your expensive equipment is safe and secure.

Universal Mounting Design enables this bracket to fit the majority of projector brands on the market with mounting hole distance ranging from 8.9” to 12.4”.

Adjustable Features include -15° to +15° tilt and 16° swivel offering multiple viewing angles that the whole group can enjoy, as well as height adjustment from 16.9” to 25.6” to create a variety of mounting options for flat ceilings and wall surfaces.

【APPLICATION】Fits the majority of mini projectors, CCTV, DVR, cameras and even home surveillance system, with a 1/4" (6 mm) or 1/6" (4 mm) Single-Screw Hole at the bottom.

【QUALITY】Made of high quality aluminum alloy, with surface oxidation treatment ensuring durability and dependability. Anti-shake Design and Larger Base has a loading capacity up to 5kg.

【FEATURE】360 Degrees Tilt & Swivel, meets myriad of needs and desires. Height adjustable from 20-40 cm (7.8-15.7 Inches), Compact and portable mount, Installation Screws are included, easy to install.

GREAT PROJECTOR MOUNTS: The ceiling mount for projector saves on space and offer perfect viewing positions. The white powder-coated finish blends well with the majority of home and office environments, Compatible with Epson/Emerson/BenQ/Fangor/Vankyo/Acer/Artlii/Optoma and most projectors.

VERSATILITY DESIGN: Newly Designed 3-In-1 retractable projector mounts from ceiling, including Flush Ceiling Installation; Telescoping Arm Ceiling Installation; Wall Installation. Mounts to Wood studs, concrete and wall surfaces, flat ceiling, drop ceiling, suspended ceiling, etc.

STABILITY AND DURABILITY: This wall mount projector bracket, with solid construction made entirely of high grade steel, supporting projectors up to 40 lbs. Projector mount wall keeping your expensive equipment safe and secure.

①HIGH QUALITY - Made of high quality aluminium alloy, with surface oxidation treatment ensuring durability and dependability

②TILT & SWIVEL - 90° Tilt & 360° swivel, meets myriad of needs and desires, including the 6.35mm screw size

③MULTIFUNCTIONAL - Suitable for ceiling mounted, wall mounted or tabletop stand. Fits brands of projectors and surveillance security cameras

Universal Ceiling Mount - Fits most of different DLP projectors, you can install the projectors on the ceiling or on the wall when you confirm the screw hole on the the back is 1/4 inch.

Tested 11 Lbs Load Support - The mount factory has done a lots of load-support tests to confirm that the projector mount can hold a maximum load of 11 Lbs when properly installed.

Fully Adjustable Angle - Supported to 35-degree tilt, 90-degree swivel, and 360-degree rotation. Hits all the right viewing angles so you can get a comfortable projection angle.

1. Angle adjustable projector mount can be rotated 360 degrees and tilt 180 degrees with a knob to fix the angle easily.The length of projector holder is 7 in /18 cm.

2.Mini projector wall mount is made of high-quality aluminium alloy. The tube is designed to be thicker. It is suitable for mini projector and camera. The actual maximum carrying capacity is 11 lbs/5 kg.

3. The installation of mini projector mount is easy. We are equipped with screw and screw hole filler and other accessories. You can install them on the ceiling or on the wall. (pls tighten all parts, screw in solid spot, use toggle bolts for drywall.)

Universal Camera Mount - The tray has a usable size of 35cm*22cm and fits most video conferencing cameras, projectors and routers on the market.

Height Adjustable - The projector mount can be mounted on the wall or ceiling. The extendable height of the projector can be adjusted to the ceiling for 34cm to 56cm.

Premium Materials - This projector stand is made of high quality Carbon steel to support projectors up to 22 lbs.

𝐔𝐧𝐢𝐪𝐮𝐞 𝐃𝐞𝐬𝐢𝐠𝐧 : The hanging projector adopts a two ways to use design, can be installed as a Flush mount or Telescopic with height adjustment 16.9" - 25.6". Minimum distance from ceiling (w/o extension column): 4.7in/12cm. -15 to +15 degrees, Roll: -8 to +8 degrees, Maximum distance between mounting holes: 17.5 in/ 44.5 cm.

𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐌𝐨𝐮𝐧𝐭𝐢𝐧𝐠 𝐌𝐚𝐱 𝐖𝐞𝐢𝐠𝐡𝐭 : The projector hanging mount made of high grade steel ,can bear the maximum support weight is 44 lbs / 20 kg, keeping your expensive equipment safe. If used in large projectors, the stand may bend. Note: This ceiling tv mount does NOT support vaulted ceilings and walls.

𝟑𝟔𝟎° 𝐀𝐝𝐣𝐮𝐬𝐭𝐚𝐛𝐥𝐞 & 𝐄𝐱𝐭𝐞𝐧𝐝𝐚𝐛𝐥𝐞 𝐃𝐞𝐬𝐢𝐠𝐧 : Mounting arms removable and extendable. With extension pole, height adjust from 10.62'' to 21.26'' (27 - 54 cm). The projector wall mount is very suitable for living room projection, meeting room , classroom teaching etc.

QUICK SET UP: The projector tripod stand is made of aluminum alloy which acts a perfect base for easy locking clamp-style fasteners, providing hassle-free and fast setup.

EASY TO TRANSPORT: The portable projector tripod stand folds down effortlessly into its travel bag for mobility and storage. Perfect for use at home, in the office or in a classroom.

ADJUSTABLE DESIGN: The projector stand can be adjusted to fit your specifications. Whether you need it to be moved higher or lower, the range of 20.5 inches minimum to 59 inches maximum should fit all of your needs.

Diameter 1/4 inch screw mount. Made of high quality durable aluminium alloy in light weight 0.2kg(0.43lbs)

3-In-1 Mounting ways including ceiling mounted, wall mounted and tabletop stand for your option

Aluminum Alloy with an integrated ball joint system allowing 90-degree tilt, 360°rotatable head for easy to adjust angle