Best Groz Pry Bars in 2026

Our largest Dominator pry bar yet, with a curved blade and a 58-inch OAL, will handle the toughest jobs you can throw at it

Patented, two-composite, ergonomically designed handle provides a comfortable and secure grip and is oil, solvent, and temperature resistant

Metal striking cap at the end of the handle is in direct contact with the shaft, allowing the user to strike the tool without damaging the handle

Gearwrench's Extendable Pry Bar has an expandable and adjustable to reach areas inaccessible to a fixed head tool for improved access

Head rotates 180° through 14 locking positions for unparalleled access and leverage

Compact design allows for work in tight spaces

Angled tip creates a high-leverage fulcrum for prying or lifting

Sharpened chisel end wedges into tight spaces

Generously sized textured poly handle offers a comfortable, nonslip grip

Forged from single piece carbon steel construction with powder-coated finish for strength, durability and long-lasting

24" in length, 5/8" in diameter and weighing only 2.7 pounds makes this bar easy to use

Designed with a polished, beveled chisel end and polished slotted claw for improved functionality and performance

Head indexes over 180 Degrees and locks in 16 positions

Head has raised striking surface allows for striking to loosen and penetrate

Angled head with nail slot for prying and pulling nails and boards

Pry bars have rolling-head/hook end and pointed end design

Includes: 6", 12", 16" and 20"

Machined and hardened tips

Set contents: (1) 7-1/4-Inch and (1) 9-1/4-Inch Stainless Steel Pry Bar Scraper

Features a nail puller, razor sharp scraper edge, and an angled edge for pulling and prying

Angled edge is ideal for pulling apart walls, prying off moldings, tiles, wood slats, and removing baseboards and trims; angled end is designed with a chiseled edge so it can wedge into tight spaces

20% thicker, steel construction for maximum prying power

Curved rocker end for sniper control

Precision-honed, beveled ends for easier penetration

Long, tapered end for aligning and adjusting metal or woods

Angled chisel end for extra leverage when prying

Cut Width or Point Size: 0.625-Inch

FORGED IN ONE PIECE – The most durable, longest lasting striking tools available

HIGH LEVERAGE DESIGN – Reinforced rocking head for maximum leverage

BUILT FOR THE PRO – Carpenters, wood workers, demolition crews, framers, roofers, tradesmen & serious DIYers. Perfect for window & door trim, molding and baseboard

NAILED IT Features 3 nail removal slots with different angles to get the most stubborn of nails.

GET CRACKING Thin & strong chisel tips ends get in the tightest cracks & crevices. Features “Shepherd’s crook” for greatest prying power.

HIGH-VISIBILITY Easily locate your tool on the job with the rugged bright orange enamel finish. Never leave your pry bar behind.

OTC Jimmy Bars are versatile tools with a multitude of uses, from prying to aligning - flattened on one end, tapered to a point on the other

30 inches in length

7/8 inch diameter

DURABILITY: Integrated strike cap allows tool to be struck without damaging the handle

COMFORT: Bi-material handle for comfortable use and better grip

TOOL LENGTH: 12", 18" & 24"

Long, tapered end for aligning and adjusting metal or wood

Angled chisel end for extra leverage when prying

Over all length: 30-Inch, body size: 7/8-Inch, body type: Hex, blade width: 1.0-Inch

12-inch Utility Pry Bar, double claw with end chisel nail puller, Made of Drop Forged and Heat-treated Alloy Steel, tough and easy to grip,suit for precision nail pulling ( Overall Length 300mm )

8-inch End Cutting Pliers, Carpenter pincers for easy nail extraction for construction, floor installation etc, Made of High Carbon Steel for durability and prevent rusting. ( Overall Length 200mm )

7-inch and 10-inch Flat Pry Bar, double claw with end of nail puller ( Overall Length 185mm and 260mm )

Heavy duty Bars forged from chrome alloy steel

Prying end is on one side with lining up end on the other

Fully hardened body resists any bending

DURABLE MATERIAL - Pry bar set is made of high-quality carbon steel, and surface is sprayed with plastic to improve durability and prevent corrosion. The heat-treated crowbar is very strong and flexible, which can avoid breaking during use.

VERSATILE CONSTRUCTION - The curved claw improves leverage and reduces damage to work piece. Flat claws can be inserted deeper into narrow spaces, thus increasing leverage. The nail groove function makes it easier to pull nails with utility pry bars.

WIDE APPLICATION - ValueMax pry bar is strong enough to handle difficult tasks and easy to control, which can assist with a wide variety of DIY tasks, such as lift flooring, remove moldings, extract nails, and more.

Manufactured from chrome vanadium steel

Fully hardened and tempered

Specifically designed for heavy prying & fulcrum prying

Set includes (1) 8'', (1) 12", (1) 18", and (1) 24" screwdriver pry bars

Tough polypropylene handles for durability and comfort

Constructed of hardened steel with black oxide finish

Made of heat treated alloy steel

Comfort grip handle

Heat resistant cellulose acetate vinyl handle

Multi-purpose

For professional and general use

Chiseled edges

Heat-treated and coated for rust resistance For a wide variety of prying and scraping uses

Nail slot in end and center for access to pulling nails

Precision-honed, beveled ends for easier penetration

4-Piece Pry Bar Set - 8" 12" 18" and 24".

Comfortable Handle: the rubber handle brings you a comfortable and non-slip grip.

Solid Strike Cap: there's a built-in cap on the top of the sturdy handle for hammer striking.

The VCT Jumbo Pry Bar Tool – 36” Inch Large Breaker Crowbar with Oversized Mechanics Handle for Heavy-Duty Automotive Prying is what you need to do serious pry work – Do not settle for anything less; Use in an automotive shop to check steering, suspension, brakes, or loose ball joints, bearings, and bushings on vehicles; Use when you need extra leverage, on the farm, or anywhere that involves work on heavy equipment

ANY SPACE, ANY ANGLE: Sharpened, bevel-end angled nose tip creates an extra leverage point and slips into tight spots so you can work in any space and at any angle

BUILT TO LAST: Heavy duty heat-treated chrome-plated long pry bar with 3/5” x 3/5” inch (16mm x 16mm) square shaft

Package includes 1 pry bar scraper, featuring a nail puller, razor sharp scraper edge, and an angled edge for pulling and prying.

Bates pry bar scraper is made of high-quality alloy steel that will prevent corrosion and rusting; sturdy stem won’t bend or crack during use.

The size of each paver lifting tool measures approx. 9.45 x 1.5 inches, appropriate size for you to hold.

This product is easy to use.

This product is highly durable

This product is manufactured in China

SET OF 5 PRY BARS - 6", 8", 12", 18", and 24" with Metal Striking Hammer Cap

INDUSTRIAL GRADE FORDGE STEEL - Made From CR-V Forged Steel in Black Finish; These Pry Bars We're Engineered to Prevent to Bending Under Extreme Pressure.

ERGONOMIC SOFT HANDLE - Comfortabel Soft Handles with Ergonomic Design. Designed to Be Used for Hours Without Hand Fatigue

Pry Bar Scraper Set is made of heavy duty stainless steel ,which prevent corrosion and rusting.

Mini bar is 6-11/16” length and 1” width with 1/4", 5/16”, 3/8”, and 1/2" socket wrench sizes; Long pry is 9-1/2” length and 1.5” width.

A thin angled chisel end to wedge into tight spaces and provide maximum leverage , sturdy stem won’t bend or crack during use.

Quantity: 1

Application: for prying, positioning and aligning applications

7/8-inch tip width

🏆 Industrial grade standard & 12 years manufacturer: MecWork has ample experience in making indexing pry bar set, high strength chrome vanadium steel in the use of heavy duty equipped with screws can be directly replaced, 3pcs uniform standard manufacturing so you can replace each other adjustable pry bar head use. Otherwise, you still need to spend time to go to the repair store to repair.

🏆Flat & Indexing Pry Bar Set Combination：With both crowbar combinations ranging from nails to engines, Indexing Pry Bar is built from sturdy chromium-vanadium steel for automotive repair, engine and construction applications with a 7-inch Bar. Flat Pry Bar perfect for window & door trim, molding and baseboard on nails.

🏆Round Button for Flat Head Upgrade:The 14 lock positions and 180° head rotation can be easily adjusted by gently pressing the round button with your thumb, making the product more fluid when adjusting the lock position and reducing wear on the head, further increasing the durability of the pry bar set.