Best Manual Pullers in 2026

GXL Carrier & Pinion Bearing Puller Dana 30, 40, 60, 70, 80, Ford 10.25 Clamshell Design

Ford 10.25" & Ford 10.5"

This tool is not used for removing pinion bearings on Dana 80.

[Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears

[Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application

[Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths

DAMAGE-FREE REMOVAL: This Mofeez 3 jaw puller removal tool makes removal side gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more simple and damage-free. It can be worked with your wrench, ratchet, or spanner.

BUILT TO LAST: All parts are made with premium carbon steel for maximum strength. The jaws are galvanized to provide superior corrosion resistance and long service life.

3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.

1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)

2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble

3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts

[Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears

[Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application

[Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm)

[Durable 3 Jaw Puller Tool]: Use the ABN 3-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears

[Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application

[Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Reach measures in 4 lengths from 1.5-inches to 3-inches (38 to 76mm)

HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.

COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.

VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.

ITEM SPECIFICATIONS: Our 2/3 Jaw 5-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 4 to 5 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation.

DESIGN CONSIDERATIONS: The 5-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a 2-jaw gear puller or reversible puller in no time and the finely threaded center screw allows for enhanced pulling power.

COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft.

Drop-forged CR-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller, and more.

Three jaws come with fine chrome plating to provide reliable and effective rust and corrosion protection. The drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.

Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8-position reversible jaws offer an inside or outside grip with short, standard, long, or extra-long reach.

Heat treated center screw

Chrome vanadium jaws

Drop forged for strength

VERSATILE BEARING PULLER: This Orion Motor Tech bearing puller set enables you to complete a wide range of pulling jobs, ideal for removing large or small bearings on front and rear wheel hub axle shafts, as well as gears, pulleys, and steering wheels

ALL-IN-ONE TOOL KIT: Our bearing separator set includes a 3" bearing separator jaw, 2" bearing separator jaw, 6" yoke, 6-1/4" forcing screw, four 4" extension screws, four 5" extension screws, and two 4-1/2" L-type legs

WIDE APPLICATION: The 2 bearing splitter jaws’ 5 ton capacity ensures they stand up to punishing use; suitable for professionals and home mechanics and compatible with most vehicles, ATVs, and light trucks

Black Forged Steel Jaws

2 Jaw Design Applies Even Pressure Preventing Damage to Bearings

Ideal for: Automotive flywheel, Motorcycle & Bicycle wheel, Pump bearing, generator bearing, Machine bearing etc.

Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.

Adjustable Design - Adjustable clamping depth and grip width, suitable for different sizes of gears and bearings，enables many bearings and components to be dismounted

High Quality Material - Made of chrome vanadium steel for strength and longevity, heat treatment process makes it more durable.

Attention: This Dent Puller Item does not include glue gun and glue sticks, we suggest user purchase hot melt glue gun and hot melt glue sticks to work with it. Also, it is effective on thin metal surfaces and is not suitable for metal surfaces exceeding 1mm.

Physics design - Using the principle of leverage to design the dent puller is ergonomic, the dent bridge puller with a unique arched bridge can adjust the spacing and rotate the button to better fit the dents, the efficient and labor.

Widely used - Suitable for any auto dents, repair door dings and hail damage and other dents. Efficient action on automobile, refrigerator, washing machine and other metal surface dents.

CONVENIENT: two jaw puller adopts adjust screw design, flexible and convenient to repaired different size gears and bearing.

PROFESSIONAL: two jaw puller gives you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.

TOP QUALITY: two jaw puller is made of carbon steel material, it is durable.

[ High Quality ] --- This is a two jaw gear puller, which is made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable. This tool is used for tearing down ball joint in parts of the combined mandrel brake system.

[ Easy Operation ] --- Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft. The puller can be bilateral rotation, enable laser stretching size and working space.

[ Wide Application ] --- Widely use in various bearings that are not easy to disassemble. Perfectly fit for automotive flywheel, motorcycle wheel, car wheel, scooter motorcycle bearing and gear and so on.

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings

【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable

【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength

Material:Carbon Steel ; Color: Black,Brass Tone

Dimension: 12.5 x 8 x 3cm/ 4.9 x 3.1 x 1.2 inches(L*W*T)

Claw Size: 10 x 3 x 0.5cm/ 3.9 x 1.2 x 0.2 inches(L*W*T)

【Adjustable for Different Gears and Bearings】-- The puller can be bilateral rotation, enable stretching size and working space.Two jaw with adjustable clamping depth, fit for different size gears and bearings.

【High Quality Carbon Steel Material】-- These Two Jaw Pilot Bearing Gear Pullers are made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.

【Widely Applications】-- These Two Jaw Gear Pullers are ideal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc

【Widely Used 3 Jaw Bearing Puller】This 3 jaw pilot bearing puller is widely used in automobile bearings, motorcycle electric car bearings, mechanical bearings, agricultural machinery etc. This bearing puller is easy to operate, easy to use and durable.

【Excellent Design】The bearing puller group adopts a three-jaw design. The three-jaw design can apply uniform pressure, which can effectively prevent slippage and bearing damage, and ensure the bearing puller stability during use. The forged and heat-treated steel jaws in the bearing puller are coated with a corrosion-resistant coating to make them more durable.

【High-Quality Pilot Bearing Puller】 The inner bearing puller is made of high-quality carbon steel through forging and special heat treatment process, so that our bearing puller has high strength, toughness and longer service life.

【Strong Material】 - Constructed from high quality chrome vanadium just forging, the overall heat treatment, strong and durable. Corrosion-Resistant black oxide finish, preventing damage to bearings.

【Well Equipped】Removes bearings, pump bearings, bushings,Removes all sleeve type bearings with 1/22 inside diameter.

【Advantage】 - The three-jaw design can apply pressure evenly to prevent damage to the bearing and ensure stability during use. There are two installation methods for the claw foot.

WIDELY USE: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.

HIGH QUALITY: The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.

ADJUSTABLE: 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-90mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.

FUNCTION 🚗: This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.

APPLICABLE 🚗: Suitable for items 30mm 90mm in diameter. (applicable bearing dimension)

MATERIAL 🚗: Made of #45 carbon steel, heavy-duty structure use oxidation treatment for corrosion resistance.

【DAMAGE-FREE REMOVAL】- Our manual gear puller can take out most of the parts that match the shaft, such as gears, sprockets, bearings, pulleys, etc. Its power is evenly distributed and will not cause damage to your items. Will be your good partner in disassembly work.

【1 TON PULLER TOOL】- Spread Reach: 332 mm/13" to 549 mm/21.6". Spread Range: 100 mm/3.9" to 200 mm/7.9". M20 Lead Screw Length: 283 mm/11". Pull Capacity: 1 Ton. And our product does not need to be installed; you can use it directly.

【TAPERED STEEL JAWS】- Three-jaw structure has the same load distribution, which can be securely clamped and concentrically pulled. The three-jaw gear puller evenly distributes the tension and protects the gear. Slim tie rods, steel center bolts, and apex threads Can easily grasp and enter narrow spaces.

2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.

This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.

2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.

Structural design,gently turning a small wrench can produce a strong pull force. Mechanical equipment combination of rod brake device and other parts of the ball joint.

Using high quality 45 carbon steel, special heat treatment for removing,with high hardness and good performance.

It can used for removing guide bearings, pump bearings, brushes. Removes all sleeve-type bearings with 17-38mm inside diameter

3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside.

Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller.

Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force.

OTC's 2-Ton 'GripLock' Puller features a 4 inch maximum reach and a 3-4 inch spread

Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation

Configurable as a 2 or 3 jaw puller to suit your needs

✅Premium Quality, Direct Fit, 2 Days Delivery

✅For 1984-present Big Twins

✅Enhance Performance. Easy Installation. High Reliability.

3-Jaw Puller Set: The inner bearing puller is ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.

Premium Material: The 3-Jaw bearing extractor pilot bearing puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.

Strong Puller Power: Structure design of the auto bushing gear extractor, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter.