Best Hps Performance Ram Air Kit in 2026

GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an estimated increase up to 7HP and up to 8.12 ft.lbs. of Torque

HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed

DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are include with each intake system

Cool air intake kit

For 2001-2006 Chevy/GM/Cadillac Truck, SUV

Cross link polyethylene material

Fit for 2002-2006 Avalanche 1500 & 1999-2006 Fit for Silverado 1500 & 01 02 03 05 06 Fit for Silverado 1500 HD & 1999-2006 Fit for Silverado 2500 & 2001-2006 Fit for Silverado 2500 HD/3500 & 2000-2006 Fit for Suburban 1500/2500/Tahoe & 2007 Fit for Silverado 1500 Classic/1500&2500 HD Classic(Please MATCH your vehicle on the left top)

Fit for GMC 1999-2006 Sierra 1500 & 2007 Sierra 1500 Classic & 2001 2002 2003 2005 2006 Sierra 1500 HD & 1999-2004 Sierra 2500 & 2001-2006 Sierra 2500 HD & 2000-2006 Fit for Yukon & 2002-2006 Fit for Yukon XL 1500/2500

Outflows the factory intake by up to 27% . Produces an additional 18 horsepower and 23 lbs. x ft. torque

3-Layer non-oiled, washable synthetic media for the perfect balance of performance, protection and convenience

Heat shield snaps onto the top of the lower half of the factory air box

Fits 2011-2014 Ford F-150 5.0L V8

Increased performance, efficiency and fuel mileage

Improved throttle response

INCREASES HORESPOWER: AIRAID performance air intake systems feature an aerodynamically-engineered intake tube, designed to accelerate airflow to your engine and reduce turbulence—helping increase your vehicle’s performance

SUPERIOR FILTRATION: AIRAID performance intake systems are engineered to provide a smooth, unimpeded path for airflow to your engine—keeping the air cooler and more oxygen-dense. Injecting more oxygen-rich air into the cylinders allows the engine to burn fuel more efficiently during combustion, offering you an increase in performance

EASY INSTALL: These simple-to-install, sophisticated systems help maintain proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go—and enjoy your vehicle’s horsepower gains

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube

BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.

IMPROVED ENGINE SOUND: Hear the power under the hood.

Reusable and cleanable 5 layer cotton filter

Improved efficiency

Meets OEM filter standard

Fit type: Vehicle Specific

50 State C.A.R.B. Compliant (EO# D-370-In)

Increases performance

Improves throttle response

This bolt-on system is designed to allow cooler outside air in through a directional cone filter and funnel it directly into the intake manifold

This kit provides noticeable horsepower and torque gains under varying atmospheric conditions

Includes blue filter and Mopar logo on intake tube

50 State C.A.R.B. Compliant

C.A.R.B E0 # D-370-15

Aluminum Piping, Mandrel bent

Gain increased horsepower and throttle response.

Circulates cooler air which is denser and produces increase in power by bringing more oxygen into the combustion chamber.

Premium, reusable air filter.

3 Inch intake Pipe With Air Filter Fit for 2003 2004 2005 2006 Infiniti FX35 G35 & Nissan 350Z 3.5L V6 (Please MATCH your vehicle model on the left top before purchasing).

Fits All 05-10 Mustang V6 4.0L - 50 State SMOG Legal CARB EO Number - D-245-14

Direct Replacement Bolt On In 30 Mins Or Less - No Modifications Or Tune Required

Improved Horsepower, Torque, Throttle Response And Acceleration - High Flow Cotton Element Washable Filter And High Flow Inlet Tube Maximize Airflow And Performance

Our products are not suitable for models with MAF Sensor installed on the intake pipe, please confirm before purchasing.

Fitment: Universally fit to vehicle with the diameter of air intake hose measures at 76mm/3" or 64mm/2.5"(using inclusive reducer).This air intake hose is designed for horsepower increase, high air flow with excellent filtration.Comes with all necessary mounting hardware for easy installation.

Air filter features dry density fibers which can obstruct foreign materials entering the engine. This air intake kit system is the complete solution to optimize throttle response and generate explosive horsepower output.

FIT FOR:Fits for most of cars.

FUNCTION:Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible.

ADVANTAGES:Effectively increase horsepower and improve the gas mileage, make the oil combustion complete and decrease the oil consumption.

【Effectively Improve Horsepower】ALAVENTE car air intake kit estimated horsepower gain of 10.68 HP at 5341 RP

【Universal 3inch Hose】Designed to improve throttle response and engine sound, fit for any 3inch / 76mm air intake hose

【Cool Air Intake System】High quality and efficient air intake system, funnel-shaped air intake hose designed to direct cold air inward, minish intake turbulence, boost air speed and generate

Fit for 2012-2015 Chevy Camaro 3.6L V6(Please MATCH your vehicle on the left top before purchasing)

This cold air intake system designed to increasing 8-10% horsepower & 6-10% torque, improveed fuel economy and creating an attractive intake noise.

No additional parts will be needed for installation after you purchase this kit, and all mount accessories are included, exactly the same as picture shown

Increased horsepower

Tuned and dyno-tested to improve acceleration and engine sound

Low restriction aluminum tubing

Estimated horsepower gain of 36 HP at 5300 RPM

All AEM Air Intakes come with a lifetime DRYFLOW Synthetic air filter with great filtration

Manufactured in the USA

Cool air intake kit

For 2007-2010 Toyota Sequoia/Tundra 5.7L

Cross link polyethylene material

Off road only

The estimated horsepower gain is 14.14 HP at 5400 revolutions per minute

Gunmetal gray color

Cool air intake kit

For 1992-1995 Suburban/Yukon 5.7L

Cross link polyethylene material

Direct fit for the 2015+ Subaru WRX

Dyno-proven gains of up to 33 whp and 30 wtq on stock tune

Dyno-proven gains of up to 70 whp and 70 wtq on more aggressive tune

Lightweight aluminum intake tube

Wrinkle black powder coated tube finish

High flow Pro 5R and oil-free Pro Dry S air filters included

Cool air intake kit

For 2004-2010 Nissan Armada, Titan

Cross link polyethylene material

Fit type: Vehicle Specific

Engineered to add horsepower and reduce restriction compared to OEM air intakes

All AEM Air Intakes come with a lifetime DRYFLOW Synthetic air filter with great filtration

Guaranteed for the life of your car or truck

High flow oiled filter

Tuned intake tube

Manufactured and assembled in USA