Best Rc Linkages in 2026

PARAMETER - material:304 stainless steel;thread:M3;total length:300mm;body diameter:2.8mm;length of thread:10mm.

FEATURE - easy to bend to fit the angles that you need, work great with the micro servos and projects.

for - RC boat,RC car, RC airplane, RC Helicopter,etc.

Fit for 1/10 RC Axial SCX10

Wheelbase: 313MM,Pull rod diameter: 7mm,Ball head aperture:3mm

With this rod link linkage set, you get a more durable and stronger suspension linkage system.

🏆【Compatible with】Suit for 1/10 Slash 4X4 / 2WD short course racing truck RC Car.

🏆【Replace stock model】Easy upgrade replace stock Model #1935 3139A 3139X 3644 3745, (Pay attention to check whether the Camber Link set model of the vehicle manual Is it consistent, To avoid the returns products and save your time due to the inconsistent model).

🏆【High quality】The combination of plastic Linkage and Turnbuckle can better solve the loosening problem of Linkage and make your car stronger and not shaken.

Improve performance, rust prevention, more stable and flexible.

Improve chassis life and prevent positioning displacement, giving you a different experience.

Strengthen the rigidity of the body to prevent deformation of the body.

Material: Aluminum.

Bushings sturdy. a good upgrade from OEM plastic links. Easy to install.

Upper link length:123mm,lower link length:136mm.

FEATURES: Center Hole Diameter: 2.0mm/0.08 inch, Bottom Hole Diameter: 1.65mm/0.065 inch, Total Length : 19mm/0.75 inch, Fit Rod Thread: M2

SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.

ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive

Material: Aluminum.

Color: Red.

Upper link length:123mm,lower link length:136mm.

Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers

All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required

Hot Racing part number SCX313TL01; UPC 083745925975

Fit for 1/10 RC Axial SCX10 II AX90046 AX90047

With this rod link linkage set, you get a more durable and stronger suspension linkage system

Being aluminum, ensures you get the perfect between lightweight and toughness

Made of aluminum alloy.

Compatible with rc hobby model car RedCat 1/10 Everest Gen7

Replacement of Parts# 13822.

Made by Tamiya; Tamiya is a Japan based company; parts are sourced from Global producers

Tamiya part number 50590

FEATURES: 2mm/M2, Bottom hole diameter: 2mm, Ball head screw size: M2 (it is for M2 thread tie rod) Total Length : 16mm/0.63 inch

SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.

ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive

【How to Choose?】The turnbuckles camber link rods with adjustable function, total length before adjustment is 80mm, center to center is 70mm, effective adjustment range: center to center is 70mm-80mm. This means,if the center-to-center length ranging of your original turnbuckles camber link rods is 70mm-80mm, it's what you're looking for.

【Compatible With】These turnbuckles set with rod ends, replacement for Traxxas #1935 3745 3644 2336 3737/A, 3741/3139/A/T/P/G/X, 2443/2444/2445/A/G/R/T/P etc. Compatible with Traxxas Slash VXL 4X4 2WD, Rustler VXL 4X4 2WD, Platinum/Ultimate/Stampede/Hoss/Bandit VXL 4X4 2WD Bigfoot RC Cars. (Adjustable size: 70-80mm eye-to-eye.)

【Long-lasting Performance】Hard-anodized colour, 6061-T6 alloy and super tough #45 steel for steering links and rear toe links, CNC Machining for low wear and long-lasting durability, high quality ball head ensuring smooth transmission,improves the overall performance of the rc car.

FEATURES: Center Hole Diameter: 3.0mm/0.12 inch, Bottom Hole Diameter: 2.8mm/0.11 inch, Total Length : 29mm/1.14 inch, Fit Rod Thread: M3

SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.

ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive

Applicable Object: Front and Rear Support Rod is suitable for LOSI Lasernut U4 Tenacity desert 1/10 vehicles, directly replace the plastic parts, so that the performance has been greatly improved.

Manufacturing Material: Using high quality aluminum alloy material, sturdy and durable, not easy to deformation, stable performance, prolong its service life.

Better Support and Stability: Provide better support and stability to make your remote control car look more lifelike, cool and practical.

Brand : Furitek

Type : RC Car Upgrades

Used For : Furitek Crawler Mini-Micro Cayman

Aluminum alloy material and long durability

Replacement for AXIAL YETI ROCK RACER90026 RC 1:10 Racing Climbing Rock Crawler

Part Name:Rear Lower Chassis Linkage Link

Compatible with Axial SCX10 1/10 RC Car Crawler with 313mm Wheelbase,(DO NOT FIT SCX10 II)

Made of high quality Alloy Aluminum,easy to install and durable

Wheelbase: 313MM,Pull Rod Diameter: 6mm,Rod End Aperture: 3mm

FEATURES: Total length:15mm/0.59 inch, Bottom Thread: M2 (Fit for tie rod with M2 thread) Ball head hole diameter: 2mm (fit M2 screw and nut )

SUITABLE FOR: This ball head tie rod end holder is designed for RC Airplane, RC Helicopter, RC robot, and other models.

ADVANTAGE: fine workmanship, durable in use, Make your RC more cool and attractive

🏆【Compatible with】OGRC Adjustable Turnbuckles Links with Rod Ends Set for Traxxas 1/10 1/10 Slash 4X4 / 2WD short course racing truck RC Car.

🏆【Perfect Replacement】Turnbuckles Links with Rod Ends Set upgrade replace stock Model #1935 3139A 3139X 3644 3745, (If you have any questions about the applicability, you can contact the official customer service of OGRC, or check whether the model of the Camber Link kit in the vehicle manual is the same).

🏆【High Quality】Using a combination of high-quality plastic connecting rods and turnbuckles,Adjustable Length,Linkage length can be adjusted as needed.

ALIGN

Ball Link

Helicopter

Turnbuckle Steering Linkage Rod is compatible with Redcat Racing Shockwave, Tornado Epx/epx PRO, Tornado S30, Volcano Epx/epx PRO, Volcano S30, Vortex SS & HSP BRONTOSAURUS Pro Monster Truck.

Turnbuckle Steering Linkage Rod is the replacement of parts #166017 #166617, Aluminum Turnbuckle w/ machined Rod Ends Steering Linkage is easy upgrade from the original part.

Turnbuckle Steering Linkage Rod overall length is approx 69mm-82mm, Aluminum Turnbuckle w/ machined Rod Ends Steering Linkage eye to eye length is approx 60mm-73mm.

The steering linkage servo saver compatible with WLtoys A949 A959 A969 A979 K929 1/18 rc car

Made of high quality aluminum alloy.

Upgrade parts,easy to install and durable in use.

🛒 The rc steering linkage is for 1/10 Redcat Blackout SC、Blackout SC Pro、Blackout xbe、Blackout xbe Pro、Blackout XTE、Blackout XTE Pro

🛒 The redcat steering linkage is CNC machining accuracy. Increased strength and precision

🛒 The redcat turnbuckle is High protection and long durability, provides better performance

Material: Aluminum. High quality materials and superb craftsmanship, sturdy and durable.

Upper link length: 123mm, lower link length: 136mm.

Suitable for 1:10 axial wraith rc truck.

1. The steering linkage is for Axial 1/18 UTB18 Capra RC car.

2. Made of high-quality metal materials with CNC finishing, more durable.

3. Corrosion resistant, not easy to rust, not easy to break, and effectively extends the service life.

Zinc Alloy Material: Truck bull balls are made of high quality zinc alloy material, which is durable, safe and environmentally friendly, and has a long service life.

Decoration: Decorate your model car to make it more attractive, simulation decorations make your car cooler.

Lightweight and Portable: Bumper balls bull nuts do not take up space, easy to carry when going out, light and portable.

The pull rod compatible with 1/10 Arrma Granite 4X4 Mega550 ,1/10 Arrma Senton 4X4 Mega550,BigRock crew cab rc scale car,replae the original part #AR330446 AR330515.

The rc tie Rods is made of high quality metal material,CNC machined for precision, it is reliable and durable in use.

Long Suspension Link Center of each hole (Min-Max): Approx 68-80mm; Short Suspension Link Center of each hole (Min-Max): Approx 54-67mm ;

Wear Resistant Materials: These RC tie rod ball heads are made of wear resistant plastic material, high quality, not easy to deformation, not easy to damage, reusable, long service life ，prevent deformation of RC car.

Accurate Size: These M2 pull rod ball heads feature reasonable design accurate Size，product height approx. 29mm / 1.14in,aperture diameter Approx. 3mm / 0.12in,and high accuracy, brand new and high quality,reduce unnecessary energy loss.

Stable Running Portable: These M2 tie rod end ball joints are small and lightweight, easy to carry and store，effectively improve the vehicle performance.

High quality chassis link rod provides you a more durable and stronger suspension linkage system.

Easy and convenient to install and remove.

Suit for 1/8 LMT 4WD RC Truck.