Best Casematix Recording Mixer Bags Cases Covers in 2026

Padded Mixer or Equipment Bag with Rugged Nylon Exterior

10mm Dual Layer Padded Protection and Protective Tricot lined interior prevents scratches

External storage pockets, with cord management, for cables, small accessories and power supplies

Durable ballistic nylon over molded foam protects your optics from the elements.

4 different sizes designed to fit almost every optic. ***Measure your optic and order the appropriate sized case based on dimensions.

Internal Dimensions: Compact 6.5 x 5.5 x 2.25", Mid 7 x 6.25 x 2.5", Full 8.5 x 7 x 2.5", Large/56mm 9.5 x 7 x 3.5

CUSTOMIZABLE INTERIOR: Configure the dividers to adjust the audio mixer case to fit multiple accessories, such as extra microphones, wires, and more podcast equipment

PADDED SHOULDER STRAP & HANDLE: A rugged and durable carrying handle & comfort padded shoulder strap allow for extreme portability and protection for your mixer, cables, microphones and more

SCRATCH-RESISTANT INTERIOR: Protect your rode podcast equipment from abrasion during transport. The dividers and interior are all scratch-resistant making our mixer audio case perfect for travel

Strong Molded PE exterior with heavy duty hardware.

Twist latches and 2 handles. Standard 19” rack space, with gasket sealed.

Removable front and rear cover with 2 front rails for rack-mount.

Rugged nylon exterior

5mm spongy foam protection

Protective Tricot lined interior

Padded Protection for Mixers

Rugged & Weather-Resistant Exterior

Internal Tie-Down Straps

Accommodates the RODECaster Pro Podcast Mixer

Removable foam insert below mixer holds two Rode PodMics

Two accessory compartments below mixer

Recommended for mini DJ mixers, controller or USB audio interfaces and accessories compatible with Behringer Xenyx Q502USB, 302USB and more with accessories - Case Only

Ideal for transport and storage of DJ equipment and accessories with a built-in carry handle, padlock holes and a discreet briefcase style design

Provides protection against impacts, drops, dings and dust with hard composite injection plastic exterior and customizable pre-cut pluckable cubed foam padded interior

Snug fit and internal padding for securing your Model 12

External pocket with room for mics, cables, and SD cards

Convenient shoulder strap for hands-free carry

Constructed from EVA (ethylene-vinyl acetate) material

Package Dimensions: 24.892 H x 11.684 L x 18.796 W (centimeters)

Package Weight: 0.476 kilograms

Carry Bag f the Mackie ProFX16 v3

CUSTOMIZABLE INTERIOR: Configure the dividers to adjust the studio equipment case to fit multiple accessories, such as podcast microphone, wires, and more music recording equipment

PADDED SHOULDER STRAP & HANDLE: A rugged and durable carrying handle & comfort padded shoulder strap allow for portability and protection for your mixer, cables, microphones and more DJ equipment

SCRATCH-RESISTANT INTERIOR: Protect your podcast equipment from abrasion during transport. The dividers and interior are all scratch-resistant making our sound board case perfect for travel

Compact carry case for flat screen monitors

Lightweight EPS construction with EVA reinforcement

Internal padded straps to restrain the monitor

CASEMATIX Channel Effects Mixer and Accessories Equipment Transport Case – Keep Your mixer , cables , amps , power supply , adapters and more safely stored

Internal Dimensions Accommodate USB Mixer or Powered Mixer and Accessories Within Maximum Dimensions of 18.75” x 13.25” x 3.25” - Organize , Protect and Separate Accessories using 4 Internal Pieces of Flat Foam

Impact Absorbing Foam Interior and Rigid Exterior Provide Superior Protection Against Impacts , Drops and Shock

【Specially Customized】Size: 15.7''L*12.9''W*6''H（The height of each layer is 3'').This audio mixer case is compatible with RODECaster Pro, RODECaster Pro II.(Case only）Note:For other mixer models, please measure the size to make sure it fits before purchasing

【13 Pockets with 6 Removable Deviders】This podcast mixer protective storage bag is equipped with 6 removable dividers, which can provide the right space for accessories according to your needs. 13 reasonably distributed storage spaces are perfect for your mixer, cables, microphones and more podcast gear.

【All-round Protection】The podcast equipment carrying case is made of durable nylon fabric, which is breathable, waterproof, dustproof and shockproof! Shockproof cotton is used around the storage bag to reduce the impact of foreign objects on the contents of the handbag and prevent scratches and bumps. The interior is soft and smooth, not easy to scratch the audio mixer and other accessories.

Roto-molded of LMDP Linear Medium Density Polyethylene

10U Slanted rackmount

Steel threaded rails

19" deep from Front to Back Rail

12 Space Front Load

Durable and solid rack rails

Custom cut interior for TouchMix-30 Mixer

Pocket for standard iPad with cover on

Compartment for cables and accessories

Roto-molded of linear Medium density polyethylene (lmdp)

Double walled for maximum strength, custom foam interior

Large rubber gasket in the lid for moisture control

Orca OR-32 Audio Bag/Mixer Bag - Orca 2 Year Limited Warranty

The world's first audio bag with an aluminum frame and the first that provides access to the gear inside from 6 directions

"ORCA Lift", the first solution in the world to help audio operators position the mixer from any size to any level

Easily store and transport most 16 inch mixers with this mixer bag by On-Stage

Featuring two straps with a padded handle and shoulder strap for a comfortable carrying experience

Quality made with a weather resistant exterior that protects your mixer from moisture and a padded interior that protects from damage

Polycarbonate Cover f Behringer X-Touch Universal Control Surface

CUSTOMIZABLE INTERIOR: Organize your podcast mixer, podcast microphone, headphones, cables and more into custom compartments using the adjustable dividers || Interior Dimensions: 11 x 8 x 2.5 inches

PORTABLE & PRACTICAL: A rugged and durable carrying handle & comfort padded shoulder strap allow for extreme portability and protection for your audio mixer, cables, and podcast recording equipment

SCRATCH & WATER RESISTANT DESIGN: A semi-rigid Ripstop nylon exterior protects from impacts, while a soft premium felt interior lining eliminates abrasive damages and scratches to your podcast bundle

Orca OR-30 Bag - Orca 2 Year Limited Warranty

The world's first audio bag with an aluminum frame and the first that provides access to the gear inside from 6 directions

"ORCA Lift", the first solution in the world to help audio operators position the mixer from any size to any level

10 Space Front Load

19" DEEP Rail to Rail

Standard 19" Mounting Rail Width

Rugged 3/8" Plywood with Black Laminate

Tongue and Groove Metal Railing with High-Impact Ball Corners

Industrial-Grade Rivets, Latches, Spring-Loaded Handles

Opens from all directions for maximum access

Top Clear transparent material for easy viewing and environmental protection

Unique battery pocket with rubber straps

CASEMATIX Premium audio equipment bag constructed from durable ripstop nylon and stitching , heavy duty padded internal divers and all metal hardware. This DJ case is stronger than the average cable file bag or music bag and has integrated foam

Works as Wireless Mic Case and Cable Organizer- There are two zippered side pockets that measure 11' x9" x 4" internally each. They are impact absorbing and allow room for Headphones, Microphones , and Wireless Mic Systems

Adjustable Shoulder Strap: Featuring a built-in carry handle, adjustable shoulder strap and external dimensions of 21" x 12.5" x 9", this premium and protective travel case is ideal for audio accessories transportation or as a safe storage solution.

Custom fit G-TOUR case for Presonus 24.4.2

Gator G-ARM 360 included.

Doghouse Design

Rotationally molded of Linear Medium Density Polyethylene (LMDPE) for maximum impact resistance

10U, 7-degree angled top threaded steel rails for secure mounting of popular mixers/DJ controllers

Top and doors are injection molded