Best Buildmart Registers Grilles Vents in 2026

14"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X "w X 15.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow

20"w X 24"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 21.75" Width X "w X 25.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

Easy Unrestricted Air Flow For Your HVAC System - 50° angled to provide maximum airflow

STEEL DAMPER ATTACHED - These vent covers for home floor have sturdy steel construction, powder-coated steel damper attached for durability, longevity, are smooth, shiny, and have no sharp edges. These air vents are crafted for long trouble free operation, rigid extra heavy duty to withstand constant walk on situations

EXCELLENT AIR FLOW - The metal dampers in these air vent covers provide easy unrestricted air flow as compared to the ones with fragile plastic dampers. The metal lever of these heat register covers have sufficient resistance to keep the fins in position allowing you to direct the air flow as required

EASY INSTALLATION - Simply remove the old register vent cover and place the new one in the standard duct opening. To determine size needed, measure air duct opening rather than old register. These vents are not suitable for ceiling or wall applications. No screws or tools are required to install these floor register covers

5 YEAR MONEY BACK GUARANTEE. You have nothing to worry about because we have got you covered. Our money back guarantee provides you with the comfort you deserve to make sure your money was well spent and the best part is if your not satisfied we'll return your money. This is the type of service which is unheard of and what you wont see from any of the overpriced manufacture's.

WIDE RANGE OF MOVEMENT. We provide you with the ability to extend and retract between 10" - 16" in order to make sure you still have the proper width and fit resulting in maximum effectiveness.

LONG LASTING and SAVING. Our heat and cold air deflectors are built from heavy duty plastic and super strong magnets delivering both quality and performance you deserve when making any purchase. An evenly heated or cooled room is one that will save you money and over handling your units making sure you donâ€t push your HVAC system to a point where it is overworking and can lead to overheating and hefty service call fees.

Oriental Design steel plated - Brushed Nickel finish wall/ceiling register

Included are steel screws for easy installation and a consistent look

Metal damper boxes rust and seize up so we make our damper boxes with recycled high impact polystyrene. This is not a cheaper option it’s the best option

Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Size. If the hole on the wall is 20"(W)x30"(H) please order 20"x30" size option.

Handua Return Air Filter Grille used for sidewall or ceiling openings. Our Return Air Filter Grilles do not require screwdriver to open, you can easily open the latch with a finger move.

The door/face is removable for easy filter change and cleaning, this Grill uses a 1" thick filter (not included).

Steel construction for sidewall or ceiling application

1/2-in spaced fins

Four-way air deflection with a multi-shutter damper

12"w X 6"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75"w X 7.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

High Quality Solid Stamped Steel Construction, No Scuff Powder Coat Durable Finish, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, EASY INSTALLATION

LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever

Steel construction, 1/2-in spaced fins

For sidewall or ceiling application

Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning

12"w X 4"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75"w X 5.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever

QUALITY PACKAGING - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality

14"w X 6"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 15.75"w X 7.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever

QUALITY PACKAGING - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality

24"w X 18"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 20.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches

High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges

12"w X 8"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75"w X 9.75"h - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

LOUVERED Supply Grille for Sidewall or Ceiling Application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever

QUALITY PACKAGING - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality

14"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 15.75" Width X 9.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

Multi-Shutter Damper With Handle Operator - Screws Included

Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

12"w X 6"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75" Width X 7.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment

Wall mounted or celling mounted,perfect for bathroom,office,room exhaust and ventilation use.

Louvre air vent is made of high quality material

EASY INSTALLATION: available for wall mounting or ceiling mounting. Easy to install in home or other inside/outside places.

WALL OR CEILING VENT: 2-way Air vent deflector features a duct opening which measures 10 inch x 6 inch, and can be used for wall or ceiling mount; the overall dimension measures 11-3/4 x 7-3/4 inches

FUNCTIONALITY: 5 adjustable smooth glide dampers and 18 louvers control the amount and direction of airflow for rattle-free quiet ventilation and optimized performance for heating and cooling systems

DURABLE: Two-way air registers feature all steel construction with a heavy-duty powder-coated matte white finish to add a contemporary touch to your home decor and withstand heat and cold without warping

Always measure the wall opening to determine which size you should order. Wall Opening Size = Listed Size. If the hole on the wall is 24"(W)x24"(H) please order 24"x24"

Handua Return Air Filter Grille used for sidewall or ceiling openings. Our Return Air Filter Grilles do not require screwdriver to open, you can easily open the latch with a finger move.

The door/face is removable for easy filter change and cleaning, this Grill uses a 1" thick filter (MERV 8 filter included).

12"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 14.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches

High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges

High-impact polystyrene construction

Rust proof and scratch resistant

Three-position 100% damper shut-off

<b>How to Select filter grille<b>: Measure the Dry wall opening. The Listed size corresponds to the dry wall opening dimensions. Listed size = Dry wall opening size (width X height). The Outside dimensions = Listed Size + 2.5 In. Please refer to Selection guide for more details.

<b>How to install filter grille<b>: Using the latches, remove the top cover and screw in the frame in the wall/ceiling using built in tabs. Place the filter and attach the top cover using hinges at the bottom. Finally secure the top cover using the latches at the top. Please refer to Installation guide for more details.

<b>Free 3 business day shipping<b>: All the filter grilles come with free 3 business day shipping.

WALL OR CEILING VENT: Air vent deflectors feature a duct opening that measures 14 x 14 inches, and can be used for wall or ceiling mount. The overall dimension measures 16-11/16 x 16-11/16 in inches (WxL) and features 4 vent rows

FUNCTIONALITY: Louvers and slotted vanes in a fixed position control the amount and direction of airflow for rattle-free quiet ventilation and optimized performance for heating and cooling systems

DURABLE: Return air grilles feature all-steel construction with a heavy-duty powder-coated matte white finish to add a contemporary touch to your home decor and withstand heat and cold without warping

20"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 12.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches

High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges

Sit, Stay, Good Cover! Double Thick magnetized material grips your floor vents with twice the strength. Double weight keeps the cover securely in place.

Sit, Stay, Good Cover! Double Thick magnetized material grips your floor vents with twice the strength. Double weight keeps the cover securely in place.

Save Money On Heating! Flexible material contours itself around your vents to seal off airflow completely.

20"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 21.75" Width X "w X 11.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

HIGH QUALITY Solid Stamped Steel Construction With Recessed Screw Holes (SCREWS INCLUDED) To Easily Install On Ceiling Or Sidewall

QUALITY PACKAGING - Carefully Shrink Wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality

20"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

EASY TO USE - Our Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open After Install, Just Open and Close Latches

High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges

WALL OR CEILING VENT: Air vent deflectors feature a duct opening that measures 14 x 6 inches, and can be used for wall or ceiling mount. The overall dimension measures 15-3/4 x 7-3/4 in inches (WxL) and features 2 vent rows

FUNCTIONALITY: Louvers and slotted vanes in a fixed position control the amount and direction of airflow for rattle-free quiet ventilation and optimized performance for heating and cooling systems

DURABLE: Return air grilles feature all-steel construction with a heavy-duty powder-coated matte white finish to add a contemporary touch to your home decor and withstand heat and cold without warping

Unbreakable & Durable - DGQ heat and cold air deflectors are made of quality policarbonate material, high transparent, unbreakable and durable, heat resistant up to temperature 212°F / 100°C.

10" to 14" Width Adjustable - 2-3/4 inch tall, this air deflector can be adjusted from 10 to 14 inches to fit on a variety of metal vent covers and registers.

Powerful Magnets - Held in place over your vent with the powerful magnets, which allows you to easily install on any metal vent registers, like steel floor vents.

Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. This model can be used as a supply vent cover and return vent cover - This is a non-filter model

Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers

Cfm: 256 ft3/min - effective velocity: 9.8 ft/s; neck: 13 11/16" x 5 3/4" - face: 15 9/16" x 7 5/8" (The neck is the section that goes into the vent hole while the face is what will actually cover)

Size: 10.5"w X 10.5"h return air grill is the size for the duct opening measurement only, actual front end outer dimensions is 12" width X 12" height.

With White Mesh: Hon&Guan house vent built-in with a white mesh which especially designed to allow passage of air into your home while stop water and other objects from entering.

High Quality Aluminum: The premium durable aluminum shed gable vent will never rust, louvers are built to withstand hurricanes, tornados and tropical storm conditions, sturdy fabric grille screen that will not be damaged by long-term exposure to sunlight.