Best Rod End Bearings in 2026

C1045 Steel Body

52100 Steel Bearing Precision Ground & Heat Treated

5/16’’ Bore x 5/16-24 Internal Right-Hand Threads

Fits 4WD Models Only

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Front Wheel Bearing and Hub Assembly

C1045 Steel Body

52100 Steel Bearing Precision Ground & Heat Treated

1/4’’ Bore x 1/4-28 Internal Right-Hand Threads

C1045 Steel Body

52100 Steel Bearing Precision Ground

3/8’’ Bore x 3/8-24 Internal Right-Hand Threads

Type: 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

*Worthwhile Investment: 4pcs x 6mm Inside Dia Rod End Bearing. It has the characteristics of self-lubricating, high strength, wear-resistance, and corrosion resistance

*Detailed Dimension: Ball Hole Diameter is 0.236" / 6mm. M6 x 1.0 Female Thread Connector Joint, Right-Hand. Total Size is 1.65" x 0.79" x 0.43" / 42 x 20 x 11mm (H*D*T).

*Robust Construction: The rod end body is made of carbon steel, with white zinc-plated. The material of the washer is copper. The ball joint is made of hardened bearing steel with a chrome-plated surface, which has a long service life.

Model: 4 xPHS8A

FEATURES: 8mm Bore Self Lubricating Female Right Hand.M8X1.25mm rod end bearing

Large load capability,easy mounting and dismounting and mechanism simplification.

Product Name : Rod End Bearing ; Connector Type : Female

Material : Metal; Main Color : Silver Tone ; Ball Hole Diameter : 10mm/ 0.39"

FEATURES: 10mm Bore Self Lubricating Female Right Hand.

Products can withstand radial load,Axial load or radial. Axial simultaneous joint load.

Product Material: bearing steel.

Due to the inner surface of the spherical inlaid composite material,therefore, the bearing in the work can produce self-lubricating.

Thread Diameter: M8.

Features: 8mm Bore Self Lubricating Male Right Hand.

Install: Large load capability,easy mounting and dismounting and mechanism simplification. The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.

Type: 3/8" Bore x 3/8-24 right-hand male thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

Type: 1/2" Hole x 1/2-20 right-hand female thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensure long service life.

Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity.

Materials: Metal; Primary Color: Silver; #45 Steel Spherical Rod Ends and Hardened Bearing Steel Ball Joints Ensure Longer Life.

Type:Rod End Bearing; 3/8" Bore x 3/8-24 right-hand female thread rod end. Maximum angular misalignment: 9 Degree.

Features: Large load rating, low noise, anti-corrosion, tough, and durable.

Thread Diameter: M8.

Features: 8mm Bore Self Lubricating Female Right Hand.

Install: Large load capability,easy mounting and dismounting and mechanism simplification. The bearing steel ball and the copper ring are locked and squeezed so that they will not fall off.

Materials: Metal; Primary Color: Silver; #45 Steel Spherical Rod Ends and Hardened Bearing Steel Ball Joints Ensure Longer Life.

Type:Rod End Bearing; 3/8" Bore x 3/8-24 right-hand male thread rod end. Maximum angular misalignment: 9 Degree.

Features: Large load rating, low noise, anti-corrosion, tough, and durable.

[Part Number] 23060-2G500, 23060-2G401, 23060-2G400

[Fitment] for Hyundai Santa Fe 2012 (2.4L L4 - Gas); for Hyundai Santa Fe 2019-2020 (2.0L L4 - Gas, 2.4L L4 - Gas); for Hyundai Santa Fe Sport 2013-2018 (2.0L L4 - Gas, 2.4L L4 - Gas); for Hyundai Sonata 2011-2015 (2.0L L4 - Gas, 2.4L L4 - Electric/Gas, 2.4L L4 - Gas); for Hyundai Sonata 2016-2019 (2.0L L4 - Gas, 2.4L L4 - Gas); for Hyundai Tucson 2014-2021 (2.4L L4 - Gas); for Hyundai Veloster N 2019-2021 (2.0L L4 - Gas)

[Pros] Made of good metal material, reliable and durable, easy to install. Manufactured according to the original dimensions, fully adapted.

High Strength Steel Backing, Higher tensile strength of steel alloy improves rod bearing strength and retention. Increased crush improves bearing retention from higher radial contact pressures, and also improves heat dissipation.

Increased Eccentricity, Bearing eccentricity is the gradual reduction in wall thickness between the crown and parting line. This enhanced engineering feature allows for compensation for bore distortion and assists in the formation of hydrodynamic oil film.

Extended Oil Grooves and Tapered Groove Run-Out, Main bearing grooved uppers with matching groove lowers provide for less interruption to big end oil supply. Tapered groove run–out smooths big end supply cutoff and avoids pressure pulsing and cavitation.

[Dimension] Female Thread Dia: M8; Hole Dia: 8mm / 0.31 inch; Main Color: Silver Tone; Material: A3 Steel, Zinc Coated

[Feature] Rod Ball Strut Joint connector End Fitting

[Advantage] Rod Ball End is a good replacement of Rod Balls strut, and the Rod Balls are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies

THREAD DIAMETER: M6.

FEATURES: 6mm Bore Self Lubricating Female Right Hand..

INSTAL: Large load capability,easy mounting and dismounting and mechanism simplification.

Size: 3/4" Bore and 3/4-16 right-handed male thread ball joint; Maximum Angular Misalignment: 10 Degree.

Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.

Capacity: 29N Static Load Capacity, 29KN Dynamic Load Capacity.

Size: 3/8" Bore and 3/8-24 right-handed female thread ball joint; Maximum Angular Misalignment: 9 Degree.

Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

Model:SA8T/K

Package List:6Pcs SA8T/K Rod End Bearing,6 Pcs Jam Nuts,,A total of 12Pcs.

Rod End Bearing Size: 6Pcs 5/16-inch/8mm Bore and M8x1.25 rod end bearing

Thread Type: Left Hand thread, M5 Thread Dia, 0.8mm Pitch.

Material : Made of carbon steel and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life

Advantage: Circle swing agilely without any block; Self-lubricated ball socket, low noise, and durable.

Type: 1/2" Bore x 1/2-20 left-hand female thread rod end. Maximum angular misalignment: 9 Degree.

Material: The #45 steel spherical rod end body and hardened bearing steel ball joint ensures long service life.

Capacity: 19KN Static Load Capacity, 15KN Dynamic Load Capacity.

[Dimension] Female Thread Dia: M6; Hole Dia: 6mm / 0.24 inch; Main Color: Silver Tone; Material: A3 Steel, Zinc Coated

[Feature] Rod Ball Strut Joint connector End Fitting

[Advantage] Rod Ball End is a good replacement of Rod Balls strut, and the Rod Balls are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies

JADODE Wheel Bearing Hub Assembly Tie Rod End Link kit includes 2x Front Wheel Hub and Bearing Assembly；2x Front Suspension Outer Tie Rod End Link；2x Front Suspension Inner Tie Rod End Link

Interchange Part Number: 515096 ES800223 EV800084

Compatible with Cadillac Escalade；Cadillac Escalade ESV EXT；Chevrolet Avalanche；Chevy Silverado 1500；Chevy Suburban 1500；Chevy Tahoe；GMC Sierra 1500；GMC Yukon；GMC Yukon XL 1500

[Dimension] Female Thread Dia: M8; Hole Dia: 8mm / 0.31 inch; Main Color: Silver Tone; Material: A3 Steel, Zinc Coated

[Feature] Rod Ball Strut Joint connector End Fitting

[Advantage] Rod Ball End is a good replacement of Rod Balls strut, and the Rod Balls are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies

High Strength Steel Backing, Higher tensile strength of steel alloy improves rod bearing strength and retention. Increased crush improves bearing retention from higher radial contact pressures, and also improves heat dissipation.

Increased Eccentricity, Bearing eccentricity is the gradual reduction in wall thickness between the crown and parting line. This enhanced engineering feature allows for compensation for bore distortion and assists in the formation of hydrodynamic oil film.

Extended Oil Grooves and Tapered Groove Run-Out, Main bearing grooved uppers with matching groove lowers provide for less interruption to big end oil supply. Tapered groove run–out smooths big end supply cutoff and avoids pressure pulsing and cavitation.