Best Hipicco in 2026

SIZE：Model: LMK6UU, Bore Diamter (dr): 6mm, Outer Diameter (D): 12mm, Total Length (L): 19mm, Flange Base(L*W):22mm*22mm

DOBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant; ,

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

SIZE：Model: LM6UU, Bore Diamter (dr): 6mm, Outer Diameter (D): 12mm, Total Length (L): 19mm.

DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

SIZE：Model: LM8UU, Bore Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 24mm.

DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

SIZE：Model: LMK10UU, Bore Diamter (dr): 10mm, Outer Diameter (D): 19mm, Total Length (L): 29mm, Flange Base(L*W):30mm*30mm

DOBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant; Static Load Capacity (Cor): 540N, Dynamic Load Capacity (Cr): 370N

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

[SIZE] - Bore Diameter=20mm, Outer Diameter=35mm, Thickness=10mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

SIZE：Model: LM8LUU, Bore Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm.

DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

Size: 3/4" Bore and 3/4-16 right-handed male thread ball joint; Maximum Angular Misalignment: 10 Degree.

Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.

Capacity: 29N Static Load Capacity, 29KN Dynamic Load Capacity.

Size: 3/8" Bore and 3/8-24 right-handed female thread ball joint; Maximum Angular Misalignment: 9 Degree.

Material: The body is made of #45 steel with solid forging; hardened bearing steel ball for strength and resistance to wear and corrosion.

Capacity: 10KN Static Load Capacity, 9.4KN Dynamic Load Capacity.

Thread Type: Left Hand thread, M5 Thread Dia, 0.8mm Pitch.

Material : Made of carbon steel and zinc plated , high hardness, and great wear resistance, showing stable performance and lasting service life

Advantage: Circle swing agilely without any block; Self-lubricated ball socket, low noise, and durable.

Model: SCS16UU, Inner Diameter: 16mm/ 0.63",(For Linear Bearing Slide Bush: LM16UU)

Slide Block Size: 50mm x 44mm x 38.5mm / 1.97" x 1.73" x 1.52" (L*W*H); Mounted Hole Size: M5.

Material: The body is made from aluminum alloy and Chromium steel bearing ball.

Model: SCS10UU, Inner Diameter: 10mm/ 0.39",(For Linear Bearing Slide Bush: LM10UU)

Slide Block Size: 40mm x 35mm x 26mm / 1.57" x 1.38" x 1.02" (L*W*H); Mounted Hole Size: M5.

Material: The body is made from aluminum alloy and Chromium steel bearing ball.

[MODLE] - Bearing Model: AXK1528 (I.D.=15, O.D.=28, Bearing Thickness=2mm,); Washer Model: AS1528

[MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

Size: Model: CF6 (KR16)，Roller Dia.: 16mm; Roller Width: 11mm; Standard Thread Size: M6x1mm

Solid sealed：Preventing the entry of foreign matters like dust, this would extend the life of needle roller bearing.

High load capacity. 270kgf on Dynamic Load Rating (Cr), 170kgf Static Load Rating (Cor). The limited speed goes to 25000 rpm.

[Model] - HK121812 (Bore Dia. (Fw)= 12mm, Outer Dia. (D)a= 18mm, Width (C)= 12mm)

[MATERIAL] - ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Roller, high load carrying capacity and stiffness, good heat tolerance.

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Pre-Lubricated. Good running properties; Low cross section, enable downsizing and suit for use in restricted mounting spaces.

[SIZE] - Bore Diameter=25mm, Outer Diameter=47mm, Thickness=15mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

[MODLE] - Bearing Model: AXK6590 (I.D.=65, O.D.=90, Bearing Thickness=3mm,); Washer Model: AS6590

[MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

[SIZE] - Bore Diameter=4mm, Outer Diameter=9mm, Thickness=4mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

[MODLE] - Bearing Model: AXK3047 (I.D.=30, O.D.=47, Bearing Thickness=2mm,); Washer Model: AS3047

[MATERIAL] - Needle roller thrust bearings made of chrome steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

Package Content: 2Pcs KPL007 Pillow Block Bearing Flanges.

SIZE: Bore Size: 35mm/1.38"; Mounting Hole Diameter: 13mm/0.51"; Mounting Hole Distance: 96mm/3.78"; Total Size:122mmx33mmx80mm/4.8"x1.3"x3.15"(L*W*H).

MATERIAL: Made of high-quality zinc alloy with high strength, rust-proof, durable, have long Life

Package Content: 4Pcs KPL002 Pillow Block Bearing Flanges.

SIZE: Bore Size: 15mm/0.59"; Mounting Hole Diameter: 7mm/0.28"; Mounting Hole Distance: 53mm/2.09"; Total Size:67mmx18.5mmx42mm/2.64"x0.73"x1.65"(L*W*H).

MATERIAL: Made of high-quality zinc alloy with high strength, rust-proof, durable, have long Life

Package Content: 2Pcs KPL006 Pillow Block Bearing Flanges.

SIZE: Bore Size: 30mm/1.18"; Mounting Hole Diameter: 13mm/0.51"; Mounting Hole Distance: 85mm/3.35"; Total Size:112mmx27mmx70mm/4.41"x1.06"x2.76"(L*W*H).

MATERIAL: Made of high-quality zinc alloy with high strength, rust-proof, durable, have long Life

SIZE：Model: LMF16UU, Bore Diamter (dr): 16mm, Outer Diameter (D): 28mm, Total Length (L): 37mm, Flange Base(D):48mm

DOBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant; Static Load Capacity (Cor): 1177N, Dynamic Load Capacity (Cr): 775N.

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

SIZE：Model: LM25UU, Bore Diamter (dr): 25mm, Outer Diameter (D): 40mm, Total Length (L): 59mm.

DOUBLE SEALED DESIGN: The Slide Bearing are double sealed, so as to avoid contaminants entering and save lubricant.

USAGE：Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways

The material is carbon steel, which is very suitable for linear motion rod.

The surface has been chrome plated to enhance the hardness.

Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.

The material is carbon steel, which is very suitable for linear motion rod.

The surface has been chrome plated to enhance the hardness.

Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.

The material is carbon steel, which is very suitable for linear motion rod.

The surface has been chrome plated to enhance the hardness.

Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.

Package & Size : 10pcs 608-2RS ball bearings Size : 8x22x7mm, rubber sealed deep groove.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

Widely Use : Motor,skateboards, inline skates, scooters or other skating applications etc

✔ Fits for - Shaft diameter 3/4" and hubs wheels diameter 1-3/8".

✔ Material - Manufactured by chrome steel sturdy and durable.

✔ Seal - Preserve grease and prevent impurities from entering.

Single-row bearing for supporting radial loads

Shields on both sides of the bearing to keep lubricant in and contaminants out

Carbon steel for durability and resistance to deformity under heavy loads

Model: LM8LUU Bore Diamter (dr): 8mm, Outer Diameter (D): 15mm, Total Length (L): 45mm)

It is generally used on 3D printers and CNC machines. These bearings have proven to be long lasting and provide precise low friction linear movement.

Used for the design of linear motion products it can cooperate with linear bearing to ensure excellent sports performance under high load or long stroke occasions.