Best Inline Skating Replacement Bearings in 2026

Single, non-contact, removable rubber shield for easy cleaning and less friction

High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

16 Pack of 8mm Bearings - Enough for One Pair of Skates

Lubricated with Low Viscosity Bones Speed Cream

Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Rollerblades, Electric Skateboards, and has the highest precision in the market. Higher precision than REDZ

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Rollerblades, Electric Skateboards, and has the highest precision in the market. Higher precision than REDZ

PRE-LUBRICATED WITH HIGH SPEED RACING LUBE: Ultra-Fast Lube for Guaranteed High Speeds and minimal friction. Yellow shield seals lubricant inside bearing and wheel

Package & Size : 10pcs 608-2RS ball bearings Size : 8x22x7mm, rubber sealed deep groove.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

Widely Use : Motor,skateboards, inline skates, scooters or other skating applications etc

Single, removable, non-contact rubber shield allows easy cleaning and low friction.

High speed nylon ball retainer provides added strength and speed.

Pre-lubricated with Speed Cream racing lubricant

Precision Ground Skate Bearings / Fast, Long Lasting, Easy To Clean

Includes 16 RollerBones Bearings and a CCS Skate Tool

Removable Non-Contact, Frictionless Rubber Shields and High Speed Nylon Ball Cages

Package of 16 Bearings

8mm

Durability paired with functionality make this bearing press a can't miss tool. This tool eliminates the struggle of installing and removing bearings by using leverage without damaging the bearings

This press can be used with virtually all skateboard wheels and most longboard (maximum size of 70mm x 45mm), inline (maximum size of 82mm x 24mm), and even quad wheels (maximum size of 70mm x 45mm)

This press comes assembled with an 8mm axle for standard size 608 bearings, and comes with an extra 7mm axle for size 627 bearings

1 SET OF 8 HIGH SPEED AND HIGH PERFORMANCE ABEC 7 BEARINGS: These Abec 7 bearings can be used with Skateboards, Inline skates, Electric Skateboards, Scooters etc. They are high precision and high speed bearings so that you can reach top speeds whether you’re bombing hills, skating around town, or racing your homies to the skate park.

SMOOTH AND FAST PRE LUBRICATED BEARINGS: Radeckal Abec 7 Bearings contain a super fast, high speed lube that reduces friction to give riders a super smooth and fast ride. If you’re tired of bearings that aren’t smooth and give you a rough ride, switch to these amazing bearings and you won’t be disappointed!

SKATER TESTED: We always test our bearings and these bearings have been tested by our skate team to ensure that they are the best bearings on the market!

✅【QUALITY & DURABILITY】 -- Made of high-quality lubricated 608ZZ ABEC-5 steel

✅【OPTIMAL PERFORMANCE】 -- Features dual shields for optimum lubrication and reduction of contaminants

✅【MATERIAL OPTIONS】 -- Available in carbon or chrome steel. Versatile: inline, roller blade, rollerskate, skateboard, RipStik & more.

✅【QUALITY & DURABILITY】 -- Made of high-quality lubricated 608-2RS steel

✅【OPTIMAL PERFORMANCE】-- Features removable dual shields for optimum lubrication and reduction of contaminants

✅【ALL SKATE TYPES】-- Built for any type of skating: inline, roller blade, rollerskate, skateboard, electric skateboard, RipStik and more

CERAMIC BEARINGS 608 - 16 Bearings for 8 Skate Wheels (2 Skates)

RACE PRE-LUBED For Fast Rollerskating - Dragon Rollerblade bearings offer ultra smooth & long lasting performance with our signature skate lubricant formula. Bearings built to perform

SET OF 16 BEARINGS - 608 bearings designed to fit 8 x roller skate, scooter, rollerblade, skateboard or longboard wheels. 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)

Shaft Diameter : 6mm - 15/64''

Hex Width : 4mm - 5/32'';

Overall Size : 37 x 13mm/1.5'' x 0.5''(L*D); The 1.5 inches/37mm is the full length, completely screwed axle(After the two ends of the skate wheel socket screw are fixed together).

Package includes: you will receive 30 pieces rolling bearings, black double rubber sealed deep groove, enough quantity to meet your daily requirements for usage and replacement

Serviceable material: sealed bearing is made of alloy steel , reliable in quality, not easy to deform and rust under heavy load; There are protective Shields on both sides to keep lubricant in and contaminants out

Size production: the inner diameter of the skateboard bearings is about 0.32 inch/ 8 mm, the outer diameter is about 0.87 inch/ 22 mm, and the width is about 0.28inch/ 7 mm, proper size is suitable for most mechanical products

💎【Chrome Steel Special Packaging】To ensure reliability andmech longer ages, bearings are made of High-Quality Supreme chrome steel AISI 52100 which is more durable than carbon steel, not only strength but also with dual shields for optimum lubrication and reduction of contaminants. Bearings are stacked in specially transparent boxes, which are handy for storing and organizing counting until you need them,easy to put bearings in your pocket and take out.

💎【Pre-lubricated Neat and tidy】Lubricated with cosmoline waxy coatinge and grease at manufacture to protect them antirust during shipping. Wash them in the sink with dish soap water, when you still feel gummy sticky or stiff. If necessary, clean and wipe off outside grease with paper towels and WD- 40(degreaser Goo Gone other agent solvent) to remove grease, bearings will spin freely. For safety, cleaning must be done outside well away from any ignition sources.

💎【Widely Used】Suitable for skateboards, roller inline skates, roller blades, scooters, Bandsaw shark wheels, 3d printing program filament spool holders roller guides, fidget spinner,repair motor small micro rotary trolling motor wall mounted air conditioner unit floor fan blower air purifier motor, treadmill shopvac motor radiator fan, shopping cart medical walker whee, luggage wheel wheelchair CNC router sander, power tool ect.

✅【HIGH PERFORMANCE & BUILT TO LAST】 -- Bearings made of high-quality lubricated 608ZZ ABEC-7 chrome steel (stronger than carbon steel) with dual shields for optimum lubrication and reduction of contaminants

✅【COMPLETE SET】 -- Comprehensive package deal for convenient quality skate wheel replacement

✅【PACKAGE OPTIONS】 -- **4-wheel pack: 8 bearings, 4 washers, 4 spacers** -- 8-wheel pack: 16 bearings, 8 washers, 8 spacers.

High Precision High Speed Bearings: Used with Skateboards, Longboards, Inline Skates, Rollerblades, Electric Skateboards, and has the highest precision in the market.

Pre-lubricated with High Speed Racing Lube: Ultra-Fast Lube for Guaranteed High Speeds and minimal friction.

Engraved Color Seals for Protection: Cool engraved colored seals for bright colors and protection from dirt, rocks, dust, to lengthen the life of the bearing and maintain precision.

✅【CERAMIC】-- Premium silicon nitride ceramic balls for an enhanced skating experience

✅【QUALITY & DURABILITY】-- Bearings made of high-quality lubricated 608-2RS steel

✅【OPTIMAL PERFORMANCE】-- Features dual shields for optimum lubrication and reduction of contaminants

DURABLE & STURDY: Made of high quality steel with coating on the connecting part, skate axle bolts is durable, sturdy and not easy to loosen.

EASY TO INSTALL: Skate axle is only suitable for skating shoes required the female axle fittings on the wheel.

NOTE: Doesn't suit for roller skating shoes. Please check the length and suitability you need before order.

✓ The Bont 125mm Inline Skate Wheel Bearing Press is recommended for any skater who frequently changes bearings. One end serves to press bearings into your skate wheels, while the opposite end allows for easy bearing removal

✓ Getting bearings in and out of wheels that use aluminum hubs is not easy, so Bont has developed a larger bearing press that is designed for 100mm, 110mm, and 125mm inline skate wheels

✓ Made from 6061 aluminum and steel the Bont bearing press is build to last

Pre-spun for optimal speed

Highly durable stainless steel components

Premium pro level components for ultimate performance

Chrome Steel 52100 (GCr15) Precision Races

Hard Chromium Steel Balls

Made of high-quality alloy, which is strong and durable.

Inner diameter: 0.24" / 6mm; outer diameter: 0.31" / 8mm; length: 0.43 inch / 11 mm.

The additional side plugs can better secure the bearing, which helps reduce the resistance on the bearing and makes the movement of the bearing more stable, thereby helping to prevent the bearing from collapsing.

ENOUGH TO USE: A set of 15pcs female skate axles for inline skating wheels

LENGTH: The inline skate shoe axles outer diameter is 8mm and length is 35mm or 38mm

DURABLE & STURDY: Made of high quality steel with coating on the connecting part, it is durable, sturdy and not easy to loosen

SPEED UP FASTER & ROLL FARTHER - The KwiK Ceramic Bearings use the advance characteristics of ceramic balls paired with Titanium Nitride. This combination creates a remarkable performance for your skates

HEAT & FRICTION RESISTANT - The KwiK bearings resist heat and friction to allow for a free, fast-spinning roll.

CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. This provides strength and support to create a performance with the most roll.

Super high speed precision bearings. Note: these are for 7mm inner axles. Inner diameter is 7mm, outer diameter is 22mm and width is 7mm.

Diamond Polished Super Light Silicon Nitride Ceramic Balls. 7mm inner diameter (double check which size your skate requires)

Highly polished races with high performance nylon inner cage + proprietary inner tolerances

Use For: Inline Roller Skates Shoes,Speed Inline Roller Skating,Free Line Skate (Drift Board),Skate board,Long Board,Scooter,Quad Skate

Bearing Type:Hybrid ceramic bearing

Material: Bearings Ring: Stainless Steel Beads: 7 Black Ceramic Beads (Si3N4)

RELIABLE PERFORMANCE - 76mm/SG5 bearings/6mm spacers

76mm/80A WHEELS - Upgrade replacement value replacement wheels

SG5 BEARINGS AND SPACERS - Easy replacement

UNMATCHED DURABILITY: Titanium coating ensures supreme corrosion resistance and unmatched strength.

IMPACT-RESISTANT CAGE: The maximum strength nylon cage guarantees exceptional durability.

READY TO ROLL: Pre-lubed and skate-ready straight out of the box.

FAST Swiss engineered races and balls are precision honed for maximum speed

STRONG Deep groove raceways and premium Japanese SUJ2 chrome steel withstand hardest turns and stops

LONG LASTING Labyrinth seal defends against dirt and debris to extend bearing lif