Best 8 Pack Skate Skateboard Bearings in 2026

Bones REDS are manufactured in China to our Bones Skate Rated specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones Swiss performance at a fraction of the cost, they have become the best selling bearings.

Single, non-contact, removable rubber shield for easy cleaning and less friction and High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

Single, non-contact, removable rubber shield for easy cleaning and less friction

High speed Nylon ball retainer for greater strength and speed

Pre-lubricated with Speed Cream racing lubricant

16 Pack of 8mm Bearings - Enough for One Pair of Skates

Lubricated with Low Viscosity Bones Speed Cream

Skate Rated clearances, tolerances, materials and lubricant provide the best performance and durability possible

BIG BALLS, the newest member of our REDS family. BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.

These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.

Includes: Set of 8 bearings, instructions, and sticker.

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Electric Skateboards, and has the highest precision in the market.

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Electric Skateboards, and has the highest precision in the market.

PRE-LUBRICATED WITH HIGH SPEED RACING LUBE: Ultra-Fast Lube for Guaranteed High Speeds and minimal friction. Yellow shield seals lubricant inside bearing and wheel

Package & Size : 10pcs 608-2RS ball bearings Size : 8x22x7mm, rubber sealed deep groove.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

Widely Use : Motor,skateboards, inline skates, scooters or other skating applications etc

Swiss Ceramics accelerate faster, roll faster & farther, and resist dirt and moisture better.

Help to repair injuries to your races caused by dirt.

1 non-contact, removable rubber shields allow easy cleaning

SPITFIRE CHEAPSHOTS (SINGLE SET) BEARINGS

Titanium Gold High precision pro skateboard bearings pack of 8. Perfect for longboards, scooter, inline skates, rollerblade, electric skate board, and penny.

Golden Pre Lubricated Bearings with High Speed Lubricant. Fast & Long Lasting

Removable Rubber Shield for Easy Cleaning High Speed Nylon Ball Cage

⛸DURABLE & SOLID: Skates bearing spacer made of high quality Aluminium , durable and useful.

⛸BASIC REPLACEMENT BUSHING: The spacer are basic replacement bushings for most skates.

⛸BASIC REPLACEMENT BUSHING: The spacer are basic replacement bushings for most skates.

Durability paired with functionality make this bearing press a can't miss tool. This tool eliminates the struggle of installing and removing bearings by using leverage without damaging the bearings

This press can be used with virtually all skateboard wheels and most longboard (maximum size of 70mm x 45mm), inline (maximum size of 82mm x 24mm), and even quad wheels (maximum size of 70mm x 45mm)

This press comes assembled with an 8mm axle for standard size 608 bearings, and comes with an extra 7mm axle for size 627 bearings

ENDURE PRE-LUBED FOR ALL WEATHER USE - Ultra smooth and long lasting performance with our signature skate grease formula. These bearings are built to perform day in, day out

ULTRA SMOOTH RIDE - Unlike competitors at this price point, Dragons are manufactured from high grade steel, with Nylon ball bearing cage (for reduced friction + a fluid roll) and 2 Rubber Labyrinth seals (for improved longevity and lubrication retention)

INCREASE YOUR PERFORMANCE - with our signature Dual-Labyrinth Shields, designed to keep dirt and debris out while offering maximum lubricant retention. This helps improve bearing lifespan up to 50%! See image for more info

SMOOTHER RIDES: Extra lube reduces wear and tear, protects against water damage, and keeps the nylon bearing cage from splitting. These bearings will let you to perform like a pro no matter how fast or hard you ride. Break them in with a few tough ride, then enjoy a new level of smoothness.

EXTENDED LIFE: Pre-lubricated, super-hard ceramic balls decrease friction and avoid wear and tear. It's ideal for slalom skating, free boarding, and long distance cruising. It fits scooter, inline, quad, or hockey skate wheels, but is designed for skateboards and longboards.

BETTER THAN STEEL: Don’t settle for metal bearings that promise a long spin time right out of the box but are prone to rusting and are easily scratched by dirt. Oldboy ceramics are made with indestructible polished glass balls. No worry about rust or damage from dirt with ceramic balls.

ULTRA SMOOTH, ULTRA-FAST – These precision skateboard bearings are pre-lubricated with special lubricant to make the fastest, smoothest bearings out

UNMATCHED PRECISION DESIGN – Heady Shake bearings for skateboards offer a quiet rotation, high-spinning speed, and long-lasting durability for more efficient support

BLAZING SPEEDS FOR ALL YOUR GEAR – These top-quality bearings can be used for a variety of skates, including inline and roller skates, longboards, skateboards and kick scooters

Package included 20 pcs 608RS bearing double black rubber sealed deep groove ball bearing.

Skateboard Bearings made of carbon steel, durability and resistance to deformity under heavy loads.

Inner Bore Diameter 8 mm; Outer Diameter 22 mm; Thickness 7 mm.

1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality Chrome steel and ceramic ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.

2.PRECISION FITMENT: The blue skateboard bearings size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard ceramic bearings). Able to fit perfectly with most of the wheels on the market.

3.SCOPE OF APPLICATION：KVENI ceramic skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more.

HIGH HARDEN BEARING STEEL: Made of high quality Bearing steel, durability and resistance to deformity under heavy loads. Much more sturdier than carbon steel for long term use.

SIZE PRECISION: More accurate size of 8mmx22mmx7mm

DOUBLE IRON SEALED: Shields on both sides keeping lubricant in and contaminants out.

Precision ground, Skate Rated Racing bearings by Bones with removable high-speed Nylon ball retainers and Non-Contact frictionless shield for easy cleaning

Integrated bearing spacer to provide perfect 0.400" spacing

Extended race replaces need for spacers and washers

❤【Optimal Material Durable Unique Packaging】To ensure reliability andmech longer ages, bearings are made of High-Quality Supreme chrome steel AISI 52100 which is more durable and better than carbon steell, much durable not only strength but also with dual shields for optimum lubrication and reduction of contaminants. Bearings are stacked in specially rectangular transparent box, which are handy for storing and organizing and counting until you need them,take out bearings much easier.

❤【Pre-lubricated Neat and tidy】Lubricated with a few cosmoline and grease at manufacture to protect them during shipping, but clean. Wash them in the sink with dish soap water, when you still feel gummy or sticky or stiff. If necessary, clean and wipe off outside grease with paper towels and WD - 40 (degreaser or other cleaning agent solvent) to remove grease, make bearings spin more freely. For safety, cleaning work must be done outside & well away from any ignition sources.

❤【Wide For Moderate Load Application】Suitable for skateboards, roller inline skates, roller blades, scooters, Bandsaw shark wheels, 3d printing filament spool holders roller guides, fidget spinner,repair fan motor small micro rotary trolling motor, wall mounted air conditioner unit floor fan blower, air purifier motor, treadmill shopvac motor radiator fan, shopping cart medical walker wheel, luggage wheel wheelchair CNC router sander, power tool ect.Share your interesting application with us.

→ Choose from our classic ABEC 7 bearings or our premium ceramic bearings.

→ From the same CCS brand you've been trusting since 1985.

→ Set of 8: Enough for one complete skateboard

1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality carbon steel and stainless steel ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.

2.PRECISION FITMENT :The ball bearing size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard steel bearings). Able to fit perfectly with most of the wheels on the market.

3.SCOPE OF APPLICATION：KVENI steel skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more.

High Quality and Smooth:Skateboard bearing is made of high quality Chrome steel and stainless steel ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.

Precision Fitment :The ball bearing size is 608s and measures 22mm/0.87in (outer diameter) x 7mm/0.28in (width) x 8mm/0.31in (inner diameter/axle)and(20 pack of skateboard steel bearings). Able to fit perfectly with most of the wheels on the market.

Smooth and Fast Pre Lubricated Bearings:Skateboard Bearings contain a super fast, high speed lube that reduces friction to give riders a super smooth and fast ride.

✅ FEEL THE DIFFERENCE ON SKITCH - Our precision ABEC 9 chrome steel skateboard bearings out-perform ABEC 7 bearings and will have you out-spinning and out-lasting the best ceramic, titanium and swiss bearing brands.

✅ BE CAREFUL FOR 'ABEC 11' BEARINGS - Our ABEC 9 ball bearings are the HIGHEST grade available, pre-lubricated with high-speed oil, held by heavy-impact nylon retainers and sealed by two removable shields for easy cleaning.

✅ UNIVERSALLY COMPATIBLE - Also work as roller skate bearings and longboard bearings, and fits skateboard wheels, mini cruisers, kick scooters, inline skates, trikes, fidget spinners and many electric wheeled toys.

1.Specification model: 608ZZ inner diameter: 8mm, outer diameter: 22mm, thickness: 7mm. Each 10pcs bearing is sold in one package.

2. Material characteristics: This product is made of high quality carbon steel. High speed operation, low noise, high temperature resistance and smooth rotation.

3. Scope of application: for small motor, air conditioning, skateboard, roller skates, inline roller skates, scooters and small household appliances.

Skateboard t-tool comes from one of the most trusted names in skateboarding, CCS.

Includes: 8 pack of Reds Bearings, instructions, Reds logo sticker and a CCS Skateboard Tool (Black)

Bestselling skate bearing brand in the USA

SMOOTHER RIDES: Super lube reduces wear and tear, protects against water damage, and keeps the nylon bearing cage from splitting. These bearings will let you perform like a pro no matter how fast or hard you ride. Break them in with a few tough rides, then enjoy a new level of smoothness.

PERFECT FOR TRICKS: The premium wheels, when combined with Oldboy's high-grade bearings, allow you to do excellent street stunts. Since it is lightweight, it is preferred by the majority of freestyle skaters. Brought white wheels look great at the skatepark. An ideal gift for any skater

LONG-LASTING WHEELS: The Oldboy Skateboard Wheels are made from 101A and 80% rebound urethane. Durable and abrasion-resistant. constantly replacing wheels.

10pcs 608-rs ball bearing 8x22x7mm, rubber sealed deep groove.

This 608rs bearing Shields on both sides keeping lubricant in and contaminants out.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

Works with 8mm bearings

Bearing press and remover.

Applies pressure and doesn't force denting to shields.

Tool Only

Works on 8mm Bearings

Good for Roller Skates and Skateboards

1. Hybrid Ceramic bearings,do not need Grease,it have special rustling sound,Super High Speed,Long Spin time.

2.Rolling elements:7 Black Ceramic Beads(Si3N4), High Temperature and Corrosion Resistance,Abrasion resistance,High Revs.

3.Size: 8 * 22 * 7 (Inner * Outer * Height) / Unit: mm