Best Inline Skate Bearings in 2026

Package & Size : 10pcs 608-2RS ball bearings Size : 8x22x7mm, rubber sealed deep groove.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

Widely Use : Motor,skateboards, inline skates, scooters or other skating applications etc

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Electric Skateboards, and has the highest precision in the market.

HIGH PRECISION HIGH SPEED BEARINGS: Used with Skateboards, Longboards, Inline Skates, Electric Skateboards, and has the highest precision in the market.

PRE-LUBRICATED WITH HIGH SPEED RACING LUBE: Ultra-Fast Lube for Guaranteed High Speeds and minimal friction. Yellow shield seals lubricant inside bearing and wheel

Single, Non-contact, Removable Rubber Shield For Easy Cleaning And Less Friction; High Speed Nylon Ball Retainer For Greater Strength And Speed

Pre-lubricated With Speed Cream Racing Lubricant

Skate Rated Clearances, Tolerances, Materials, And Lubricant

ULTRA SMOOTH, ULTRA-FAST – These precision skateboard bearings are pre-lubricated with special lubricant to make the fastest, smoothest bearings out

UNMATCHED PRECISION DESIGN – Heady Shake bearings for skateboards offer a quiet rotation, high-spinning speed, and long-lasting durability for more efficient support

BLAZING SPEEDS FOR ALL YOUR GEAR – These top-quality bearings can be used for a variety of skates, including inline and roller skates, longboards, skateboards and kick scooters

20pcs 608-2rs ball bearing 8x22x7mm, rubber sealed deep groove.

This 608rs bearing Shields on both sides keeping lubricant in and contaminants out.

Material: Carbon steel, durability and resistance to deformity under heavy loads.

SMOOTHER RIDES: Extra lube reduces wear and tear, protects against water damage, and keeps the nylon bearing cage from splitting. These bearings will let you to perform like a pro no matter how fast or hard you ride. Break them in with a few tough ride, then enjoy a new level of smoothness.

EXTENDED LIFE: Pre-lubricated, super-hard ceramic balls decrease friction and avoid wear and tear. It's ideal for slalom skating, free boarding, and long distance cruising. It fits scooter, inline, quad, or hockey skate wheels, but is designed for skateboards and longboards.

BETTER THAN STEEL: Don’t settle for metal bearings that promise a long spin time right out of the box but are prone to rusting and are easily scratched by dirt. Oldboy ceramics are made with indestructible polished glass balls. No worry about rust or damage from dirt with ceramic balls.

ENDURE PRE-LUBED FOR ALL WEATHER USE - Ultra smooth and long lasting performance with our signature skate grease formula. These bearings are built to perform day in, day out

ULTRA SMOOTH RIDE - Unlike competitors at this price point, Dragons are manufactured from high grade steel, with Nylon ball bearing cage (for reduced friction + a fluid roll) and 2 Rubber Labyrinth seals (for improved longevity and lubrication retention)

INCREASE YOUR PERFORMANCE - with our signature Dual-Labyrinth Shields, designed to keep dirt and debris out while offering maximum lubricant retention. This helps improve bearing lifespan up to 50%! See image for more info

Bearing steel 608-2RS ball bearings are a type of deep groove ball bearing that are made of high-quality bearing steel. These bearings are commonly used in skateboard wheels, inline skates, and other small machinery.

1. High hardness and toughness: Bearing steel is a high-quality steel that is specifically designed for bearing applications. It is characterized by its high hardness and toughness, which makes it an excellent choice for applications that require high load-bearing capacity and durability.

2. Corrosion resistance: Bearing steel is highly resistant to corrosion and other forms of wear and tear. This makes it an ideal choice for applications that are exposed to harsh environments or corrosive substances.

1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality Chrome steel and ceramic ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.

2.PRECISION FITMENT: The blue skateboard bearings size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard ceramic bearings). Able to fit perfectly with most of the wheels on the market.

3.SCOPE OF APPLICATION：KVENI ceramic skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more.

1 SET OF 8 HIGH SPEED AND HIGH PERFORMANCE ABEC 7 BEARINGS: These Abec 7 bearings can be used with Skateboards, Inline skates, Electric Skateboards, Scooters etc. They are high precision and high speed bearings so that you can reach top speeds whether you’re bombing hills, skating around town, or racing your homies to the skate park.

SMOOTH AND FAST PRE LUBRICATED BEARINGS: Radeckal Abec 7 Bearings contain a super fast, high speed lube that reduces friction to give riders a super smooth and fast ride. If you’re tired of bearings that aren’t smooth and give you a rough ride, switch to these amazing bearings and you won’t be disappointed!

SKATER TESTED: We always test our bearings and these bearings have been tested by our skate team to ensure that they are the best bearings on the market!

HIGH HARDEN BEARING STEEL: Made of high quality Bearing steel, durability and resistance to deformity under heavy loads. Much more sturdier than carbon steel for long term use.

SIZE PRECISION: More accurate size of 8mmx22mmx7mm

DOUBLE IRON SEALED: Shields on both sides keeping lubricant in and contaminants out.

Higher Top Speed, Greater Strength, Longer Life, Easy Cleaning, Light Weight, and Skate Rated Design

BIG BALLS, the newest member of our REDS family. BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.

These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.

✅【QUALITY & DURABILITY】 -- Made of high-quality lubricated 608ZZ ABEC-5 steel

✅【OPTIMAL PERFORMANCE】 -- Features dual shields for optimum lubrication and reduction of contaminants

✅【MATERIAL OPTIONS】 -- Available in carbon or chrome steel. Versatile: inline, roller blade, rollerskate, skateboard, RipStik & more.

✅【QUALITY & DURABILITY】 -- Made of high-quality lubricated 608-2RS steel

✅【OPTIMAL PERFORMANCE】-- Features removable dual shields for optimum lubrication and reduction of contaminants

✅【ALL SKATE TYPES】-- Built for any type of skating: inline, roller blade, rollerskate, skateboard, electric skateboard, RipStik and more

1.HIGH QUALITY AND SMOOTH: KVENI skateboard bearing is made of high quality carbon steel and stainless steel ball ,the bearings of skateboard meet international ABEC standards, high quality, high speed , low friction, it will give you a smoother feeling.

2.PRECISION FITMENT :The ball bearing size is 608s and measures 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle)and(8 pack of skateboard steel bearings). Able to fit perfectly with most of the wheels on the market.

3.SCOPE OF APPLICATION：KVENI steel skateboard bearing make you enjoy longer spins for your skateboard wheels, mini cruiser, longboard, kick scooter, trike, inline skates, roller skates, fidget spinner and more.

【Model】: 608-2RS ball bearing 8x22x7mm, rubber sealed deep groove.

【High Quality】: 100% dimensional tolerance detection to ensure optimum suitability and long service life, with polished smooth surface, high efficiency and low noise

【Advantage】: 608-2RS sealed bearings with small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.

✅ FEEL THE DIFFERENCE ON SKITCH - Our precision ABEC 9 chrome steel skateboard bearings out-perform ABEC 7 bearings and will have you out-spinning and out-lasting the best ceramic, titanium and swiss bearing brands.

✅ BE CAREFUL FOR 'ABEC 11' BEARINGS - Our ABEC 9 ball bearings are the HIGHEST grade available, pre-lubricated with high-speed oil, held by heavy-impact nylon retainers and sealed by two removable shields for easy cleaning.

✅ UNIVERSALLY COMPATIBLE - Also work as roller skate bearings and longboard bearings, and fits skateboard wheels, mini cruisers, kick scooters, inline skates, trikes, fidget spinners and many electric wheeled toys.

BE AMAZING: NEAL Precision Skate Bearings won't make you amazing, but we'll help you get there!

THE FASTEST SPEED: Needs to have the ultimate bearings. NEAL Ceramic Si3N4 Hybrid Skate Bearings are 50% lighter and 40% stronger than steel.

BEST SELLING: Instantly feel the difference in our bearings, so finely balanced, they have an incredible maximum spin rating of 100,000 rpm under load.

1. Hybrid Ceramic bearings,do not need Grease,it have special rustling sound,Super High Speed,Long Spin time.

2.Rolling elements:7 Black Ceramic Beads(Si3N4), High Temperature and Corrosion Resistance,Abrasion resistance,High Revs.

3.Size: 8 * 22 * 7 (Inner * Outer * Height) / Unit: mm

DIMENSIONS - 8mm x 22mm x 7mm

Bouncing, landing, kickflip, heelflip or ollie, go and do it!

Strong Impact resistance- The Bearings are made of Sturdy and durable Carbon steel, don't worry about durability and resistance to deformity under heavy loads during jump, slide and impact.

⭕ 608-2RS BEARINGS ABEC 11 PRECISION: 8 pack skateboard bearings with a 8mm inner diameter, 22mm outer diameter, and 7mm width. High quality steel inner and outer races, premium grade balls, great speed nylon ball retainer. Extreme speed, low-friction, super-fast skate bearings.

⭕ REDSIA 608 BEARINGS are made for an 8mm axle. Come with a set of 4 spacers and 8 speed washers all of which keep your bearings in much better condition and will last much longer than other conventional bearings.

⭕ DOUBLE SHIELDED PROTECTION: The seals contain 2 removable rubber shields to assist in keeping the seal from being pushed and provides an effecting barrier against contamination. Non-contact seals can be easily removed for future maintenance or lubrication, can be re-installed again.

Package : 22pcs 608-2RS ball bearings, rubber sealed deep groove 608 RS ball bearings

608 RS Dimensions - 8mm x 22mm x 7mm

Material: Carbon steel, durability and resistance to deformity under heavy loads.

VXB Brand 608-2RS Bearings

VXB Brand Deep Groove Ball Bearings

Inner & Outer Races: Carbon Steel

PACK: ABEC-9 Bearing x 8

Material: Bearing Steel

Size: Universal Standard Size 8mm Core Diameter x 22mm Outer Diameter x 7mm Width.

High Speed Precision Bearings - Made of high quality lube and material for ultra smooth and long lasting performance, which is harder and tougher than carbon steel. These bearings meet interational ABEC 11 standard, high speed, high precision and low friction.

Titanium Coated - Made of high grade chrome steel with titanium coated for heat and friction reducing. These longboard bearings also have double-sided rubber shields for easy cleaning.

Ultimate Performance - Used for Skateboards, Longboards, Inline Skates, Rollerblades, Electric Skateboard,Roller Skate,Stunt Scooter and so on. These bearings are built to perform day in, day out, special design for skateboarding.

Miniature 608 ball bearing: Single row 608-2rs with small dimensions: 8x22x7 mm

Both sides with seals made of rubber (2RS) for high sealing effect, to keep lubricant in and contaminants out.

608-2rs miniature ball bearing designed for low maintenance and long life, has a good sealing.

DESIGN OF BEARINGS: TG11-Tiger, which symbolized speed, power, and flexibility. By carbonization of the totem tiger, the BRAVORD designer combines violet and sky blue on the rubber shield, and the two-color combination is traditional Chinese color schemes. And these two colors are perfectly fit to TG-11 dazzling color chrome steels, which you might see different color effects during highly-spinning in various environments, day or night

HIGH SPEED & SMOOTH SPIN: BRAVORD skateboard bearings of the chromium steel balls are oil-free and self-lubricating, which make bearings keep in high speed and spinning for minutes, and the bearings of skateboard meet international abec11, it will give you smoother feeling.

SPECIFICATION: The longboard bearing size is 608rs and measure 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter). We are set of 8 skate bearings, 4 aluminum bearing spacers, and 8 stainless steel bearing washers. Able to fit perfectly with most of the wheels on the market.

✅【HIGH PERFORMANCE & BUILT TO LAST】 -- Bearings made of high-quality lubricated 608ZZ ABEC-7 chrome steel (stronger than carbon steel) with dual shields for optimum lubrication and reduction of contaminants

✅【COMPLETE SET】 -- Comprehensive package deal for convenient quality skate wheel replacement

✅【PACKAGE OPTIONS】 -- **4-wheel pack: 8 bearings, 4 washers, 4 spacers** -- 8-wheel pack: 16 bearings, 8 washers, 8 spacers.

✅【CERAMIC】-- Premium silicon nitride ceramic balls for an enhanced skating experience

✅【QUALITY & DURABILITY】-- Bearings made of high-quality lubricated 608-2RS steel

✅【OPTIMAL PERFORMANCE】-- Features dual shields for optimum lubrication and reduction of contaminants

DURABLE & STURDY: Made of high quality steel with coating on the connecting part, skate axle bolts is durable, sturdy and not easy to loosen.

EASY TO INSTALL: Skate axle is only suitable for skating shoes required the female axle fittings on the wheel.

NOTE: Doesn't suit for roller skating shoes. Please check the length and suitability you need before order.