Best Uxcell Thrust Ball Bearings in 2026

REDUCES REPLACEMENT FREQUENCY - Ultra-durable, high-quality bearings are designed to survive the roughest conditions, lowering maintenance costs and replacement frequency.

HIGH RPM SUPPORT - The extreme RPM support minimizes wear and tear, protecting the bearings from early failure and collapse. These bearings are designed to survive high pressure.

ULTRA-RESISTANT - This ball bearing is made from chrome steel and can survive severe impacts. It can also be fitted in several machines, and metal fatigue is not a problem for these bearings.

Fits 4WD Models Only

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Front Wheel Bearing and Hub Assembly

REDUCES REPLACEMENT FREQUENCY - Ultra-durable, high-quality bearings are designed to survive the roughest conditions, lowering maintenance costs and replacement frequency.

HIGH RPM SUPPORT - The extreme RPM support minimizes wear and tear, protecting the bearings from early failure and collapse. These bearings are designed to survive high pressure.

ULTRA-RESISTANT - This ball bearing is made from chrome steel and can survive severe impacts. It can also be fitted in several machines, and metal fatigue is not a problem for these bearings.

[SIZE] - Bore Diameter=12mm, Outer Diameter=21mm, Thickness=5mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 2.1kN; Static Load Rating (Cor): 2.6kN; Limiting Speed (Grease): 1800rpm, designed for low speed operation and axial loads only

[SIZE] - Bore Diameter=15mm, Outer Diameter=28mm, Thickness=9mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Steel cage

[CAPABILITY] - Dynamic Load Rating (Cr): 10.5kN; Static Load Rating (Cor): 16.8kN; Limiting Speed (Grease): 6100rpm, designed for low speed operation and axial loads only

Material: Bearing Steel

Model: F8-16M,Inner Diameter*Outer Diameter*Thickness: 8*16*5mm,Net weight: approx 5g

High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads.

⭐【Material】The 51104 Thrust Ball Bearing is made of Chromium Steel (GCr15),durability and resistance to deformity under loads.

⭐【Dimension】Bore Diameter :20mm/ 0.787"; Outer Diameter: 35mm/ 1.37";Thickness: 10mm/ 0.4"

⭐【Application】Designed for low speed operation and axial loads only.

[SIZE] - Bore Diameter=5mm, Outer Diameter=10mm, Thickness=4mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 0.72kN; Static Load Rating (Cor): 0.79kN; Limiting Speed (Grease): 5100rpm, designed for low speed operation and axial loads only

[MODLE] - Bearing Model: AXK2542 (I.D.=25mm, O.D.=42mm, Thickness=2mm); Washer Model: AS2542

[MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise

[FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only

These bearings are shipped oiled with a rust preventative

Soft steel band offers ease of installation

Full complement of balls for increased capacity

[SIZE] - Bore Diameter=10mm, Outer Diameter=18mm, Thickness=5.5mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 2.23kN; Static Load Rating (Cor): 2.721kN; Limiting Speed (Grease): 2500rpm, designed for low speed operation and axial loads only

🤝✅Fit in place of AP3085342, 905384, AH401594, EA401594, PS401594, 9703445, AP6013684, PS11746911

🤝✅Part Number WP9703445 replaces AP6013684, 9703445, PS11746911.

Compatible with model:Compatible with model:KF26M2XBU5 KF26M2XER5 KF26M2XGA5 KF26M2XGC5 KF26M2XGR5 KF26M2XMY5 KF26M2XNP5 KF26M2XOB5 KF26M2XPM5 KF26M2XTG5 KF26M2XWH5 KG25H-4

[SIZE] - Bore Diameter=8mm, Outer Diameter=22mm, Thickness=7mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 3.5kN; Static Load Rating (Cor): 3.85kN; Designed for low speed operation and axial loads only

[SIZE] - Bore Diameter=7mm, Outer Diameter=15mm, Thickness=5mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[CAPABILITY] - Dynamic Load Rating (Cr): 1.91kN; Static Load Rating (Cor): 1.974kN; Designed for low speed operation and axial loads only

✅ [MATERIAL]: Made of Chrome Steel(AISI 52100), which features with wear-resistant, high temperature resistance and high hardness. Resistance to deformation under load, durable for use.

✅ [3 Different Size]: We have 3 size: 10mm bore diameter, 24mm outer diameter, 9mm thickness; 17mm bore diameter, 30mm outer diameter, 9mm thickness; 20mm bore diameter, 35mm outer diameter, 10mm thickness.

✅ [CAPABILITY]: 20x35x10mm: Dynamic Load Rating (Cr): 14.2kN; Static Load Rating (Cor): 24.7kN; Limiting Speed (Grease): 5100rpm; 17x30x9mm: Dynamic Load Rating (Cr): 10.8kN; Static Load Rating (Cor): 18.2kN; Limiting Speed (Grease): 6100rpm; 10x24x9mm: Dynamic Load Rating (Cr): 10kN; Static Load Rating (Cor): 14kN; Limiting Speed (Grease): 6500rpm.

Two-bolt housing with ball bearing insert for a ready to mount installation

Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads

Relubricatable solid one-piece housing pillow block for maximum strength and rigidity

Size:Inner diameter:40mm=1.57″,Outer diameter:80mm=3.14″,Thickness:5mm=0.19″,Load rating 5-10KG

Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity

Rubber seals on both sides of the bearing to keep lubricant in and contaminants out

Cast iron flanged housing for vibration damping and structural rigidity

Normal-duty, double-sealed ball bearing insert for applications with moderate radial loads and thrust or combination loads

Contact seals keep lubricant in and contaminants out and flingers provide extra sealing protection

10pcs F6-12M Axial Ball Thrust Bearing 3-Parts

Material: Bearing Steel

Type: Axial Ball Thrust Bearing

【Size】-Roller Dia:22mm;Model:CF10;Thread size:M10x1.25mm;Dynamic load(kgf):410;Static load (kgf):320;Limit speed (rpm):17000;Material:Bearing Steel;Overall Length :36.2mm

【High Quality】-The bearing made of high-quality bearing steel, which is temperature-resistant,durable and has strong loading capacity. After the bearing steel is quenched,the hardness, corrosion-resistance and abrasion-resistance are improved greatly

【Feature】-The separable components of thrust ball bearings are interchangeable;Male Thread type, with a cylindrical roller,have higher load capacity;Low noise and long service life,easy to maintain.

1. Guide bearings.

2.Various quality bearings are offered for band saws.

3. Sealed structure: This bearing USES double-sided iron dust cover; Effectively prevent dust and debris from entering; Protect lubricating oil against loss. Reduce bearing noise to ensure normal operation.

【Size】-Roller Dia:35mm;Model:CF16;Thread size:M16x1.5mm;Dynamic load(kgf):850;Static load (kgf):760;Limit speed (rpm):10000;Material:Bearing Steel;Overall Length :52.1mm

【High Quality】-The bearing made of high-quality bearing steel, which is temperature-resistant,durable and has strong loading capacity. After the bearing steel is quenched,the hardness, corrosion-resistance and abrasion-resistance are improved greatly

【Feature】-The separable components of thrust ball bearings are interchangeable;Male Thread type, with a cylindrical roller,have higher load capacity;Low noise and long service life,easy to maintain.

[SIZE] - Bore Diameter=20mm, Outer Diameter=35mm, Thickness=10mm

[MATERIAL] - Made of Chrome Steel(AISI 52100), have great wear-resistant, high temperature resistance and high hardness; Brass cage

[FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Low friction resistance, low power consumption and high mechanical efficiency; High precision, high speed, small wear and long service life.

[SIZE] - Bore Diameter=20mm, Outer Diameter=40mm, Thickness=14mm

[MATERIAL] - 420 stainless steel is martensitic stainless steel, with certain wear resistance and corrosion resistance, high hardness.

[CAPABILITY] - Dynamic Load Rating (Cr): 22.3kN; Static Load Rating (Cor): 37.7kN; Limiting Speed (Grease): 3900rpm, designed for low-speed operation and axial loads only

Cast iron flanged housing for vibration damping and structural rigidity

Double-sealed, deep-groove ball bearing insert with an extended inner ring on both sides for applications with radial, thrust, and combined loads

Acrylonitrile-butadiene rubber (NBR) seals keep lubricant in and contaminants out and flingers provide extra sealing protection

【Size】-Roller Dia:26mm;Model:CF10-1;Thread size:M10x1.25mm;Dynamic load(kgf):410;Static load (kgf):320;Limit speed (rpm):17000;Material:Bearing Steel;Overall Length :36.2mm

【High Quality】-The bearing made of high-quality bearing steel, which is temperature-resistant,durable and has strong loading capacity. After the bearing steel is quenched,the hardness, corrosion-resistance and abrasion-resistance are improved greatly

【Feature】-The separable components of thrust ball bearings are interchangeable;Male Thread type, with a cylindrical roller,have higher load capacity;Low noise and long service life,easy to maintain.

Thrust Ball Bearings