Best Whiteside Router Straight Bits in 2026

DURABLE – Multipurpose wood router bit set – delivers precision and durability

MULTI-PURPOSE – Varied 15-bit set – use for finishing in a wide range of applications

VERSATILE – bits are designed for processing soft and hard wood as well as wood composites

Solid Carbide spiral upcut router bits with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length

The CNC Router Bits is suitable for Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits

🔧 KOWOOD 35 pcs set is a common variety to cover most woodwork needs

🔧 C2 Carbide for clean and accurate trimming, edging, grooving for all type of wood material

🔧 This 35 pcs set is the most cost-effective sets. Ideal budget for beginner

Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits

Solid Carbide up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits

Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

Speed helix design for three times faster drilling than standard bits

Last 50 percent longer than high-speed steel

Easier drilling, reduced heat and extended drill bit life

Used for routing mounting slots in picture frames, plaques and other wall decorations

Control cut design helps minimize kickback

Wide and narrow flute design requires lower feed rates to prevent breakage

Solid Carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

KOWOOD PRO new 24 pcs router bit with carbide with a new process of heat treatment support this set of bit in heavy-duty and maximum durability

KOWOOD PRO C3+ carbide with a new process of heat treatment shank support this set of bit in heavy-duty and maximum durability

Precisely machined carbide for clean and accurate trimming, grooving for all types of wood material. With adjustable washer to adjust the spacer quantities as necessary to achieve the desired fit

Solid Carbide spiral router bit with 1/4inch shank and 1/8inch cutting diameter, 1 inch cutting length, 3 inch for total length

For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

Bits Precisely match the requirement of the American dimension and standard.

American industry classification MNA Carbide.Provide superior wear resistance and sharp edges for the best finish.

MNA 15-piece set is a common router bit set for the DIYer woodworker. It has a great variety of the most popular carbide-tipped bits in a Classical Wood Case.

Accuracy - TOOLDO router bit sets are manufactured by precision CNC, giving precision cutting

Longevity--Precisely machined sharp C3 carbide blades provides a clean and accurate cut with durable powder coating finish

Affordable – Direct Sale from manufactory, provide the best cost but remain in great quality

🛠️【High Quality Material】 Made of premium C3 hard tungsten steel and 45# carbon steel, the router bit set is strong and durable, will stand to long time heavy-duty use.

🛠️【What You Will Get】 The router bits set includes Corner Round 3/8", Dovetail bit 1/2", 45° Chamfer bit 1-1/4", Corner Round R1/4", Flush Trim bit 1/2", Roman ogee bit 5/32", Cove bit R1/4", Cove box bit R1/4", Straight bit 1/4", Straight bit 1/2", Straight bit 5/8", and 90° "V" Grooving bit 1/2".

🛠️【Applicable Machines】 Universal 1/2 inch shank router bit set fits most models of routers (either handheld or benchtop router table), such as Bosch, DeWalt, Makita, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker, allow you to complete your projects with confidence.

KOWOOD Plus double flute straight router bit set is an upgrade router kit designed for make cuts straight down into material and form a groove, dado or hollow out an area for a inlay.

KOWOOD Plus designed for Woodworking Lovers or Carpenter, provide a next-level experience.

KOWOOD Plus series router bits are all upgraded KOWOOD C3 carbide. This series of bits are in a heat-treated process, providing maximum durability of use.

Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/16inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

Fits Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable

Tungsten carbide tips precision ground to stay sharp.

Bits can be used on wood, metal, plastic, and masonry.

Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 1-1/2 inch Cutting Length, 3-1/2 inch for Total Length

The Route Bits With Flat Top, 3-Flute, Upcut For Easy Chip Removal And Perfect Surface Finish. Clockwise Motion for Machining.

For Aluminum 6061,7075 etc. Non-ferrous Metal, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp

Micrograin carbide-tip router bit design – ensures consistently smooth finish cuts, with superior wear resistance

Tight-fitting plywood-mortise joints – designed with undersized cut diameters to match up to the actual thickness of standard plywood

Made for standard-size plywood – creates cutting diameter to match thickness of 3/4 In. plywood

[VERSATILE] 10-pieces All-purpose wood router bit set featuring the most popular profiles, perfect for straight, trimming, decorative edging, dovetail joinery, grooving and many other furniture or woodworking job applications for home improvement woodworkers and DIY hobbyists

[PRECISION] 1/4" shank precision grinding that fits all brands router tools smoothly without any difficulty goes in or out. Could fit Makita RT0701C, DeWALT DW616, DW611, DW660, Bosch PR20EVSK, PR20EVS, PORTER-CABLE 690LR etc

[SHARP] Micro-grain tungsten carbide-tipped router bits provide superior wear resistance, sharper edges for precise finishes, excellent smoothness and long life. The improved hardness uniformity in shank and body provides ultimate durability / resist breakage / stress

Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length, CNC Operating Spindle Speed 18000 RPM, Depth of Cut 1*Tool Diameter, Specifically designed for milling Polyurethane Foam and Expanded Polystyre, Recommendation use the slowest suggested feed rates and the shortest bits necessary.

The CNC end mill spiral bit excellent for cutting Acrylonitrile-Butadiene-Styrene (ABS), Ethylene-Vinyl Acetate Foam (EVA), Polvurethane Foam, Polyethylene Foam, Wood can be processed, but it is not strongly recommended. If used for processing wood, the depth of each processing should not exceed 1/4 inch. For example, when processing 1 inch deep wood, it is divided into 4-5 processing steps.

Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits, Provides deeper cuts and larger slices with fewer passes in thick materials resulting in improved productivity and less assembly.

Single flute design for faster feed rates and high production

Cutter geometry allows for optimum chip clearance

Specially designed tips provide fast plunge cutting

Long-lasting edge sharpness

Industry-grade durability

For both CNC and handheld routers

Designed to give excellent smoothness of cut

Balanced cutting with minimal vibration

Specially designed tips provide fast plunge cutting

Single Flute allows for faster feed rates

For window and door cutouts in abrasive insulation materials, plywood, and paneling

Drill-through pilot for guiding on templet or framing after panel has been mounted

Solid Carbide spiral up cut router bit with 1/4inch shank and 0.06inch cutting diameter, 1/2 inch cutting length, 2 inch for total length

The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp

Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits

2 flute design provides a smooth finish and good feed rates

Micrograin carbide tips give excellent smoothness of cut and long life

Balanced cutting with minimal vibration

Micrograin carbide-tip Router bit design – ensures consistently smooth finish cuts, with superior wear resistance

Control cut design – ideal for fast, smooth, flush trim cuts

Double flute – for trimming laminates, veneers and similar products

Bit cuts straight or curved panel inserts for raised panel doors used with 85625MC to cut matching stiles and rails

Control cut design helps minimize kickback

Micrograin carbide tips provide superior wear resistance and long life

Used to produce raised panel cuts along straight and curved panel edges

Control cut design helps minimize kickback

Micrograin carbide tips provide superior wear resistance and long life