Best Rv Hitch Bumper Hitch in 2026

The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.

Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.

The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing

Allows you to mount hitch-mounted accessories to your RV bumper

Fits a 4-inch square RV bumper

Clamps in place- no drilling or permanent installation

REAR 2" RECEIVER HITCH: - Standard 2 inch square receiver with a Rating of 3500 Lb Gross Trailer Weight and 350 Lb Tongue Weight, is made of unique all-in-one heavy-duty thickness tubes

COMPATIBILITY: - Rear receiver hitch Compatible for 2007-2018 Jeep wrangler JK 2 door & 4 doors. (Exclude JL Models)

RUGGED CONSTRUCTION: - Heavy Duty Steel Construction Thick Welds for Superior Strength Built for Long Lasting Durability and Rust-resistant, Black powder coated for long lasting corrosion resistance

Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using

[STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included

Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down).Bolts Need to be Secure Tightly Around the Travel Trailer Bumper

MaxxHaul Hitch Receiver Adapter instantly provide a 2" x 2" receiver for RV bumper and has a 200-lb tongue weight capacity

This hitch receiver is designed for RV bumpers with 4"- 4. 5" square bumpers

Universal Design - Is compatible and accept hitch mount accessories with 2" shank such as bike racks, RV tire carriers, hitch step and other accessories.

Heavy-duty adapter bolts onto existing 4" x 4" RV bumper

Accepts 2" cargo carrier tube

200 lb. tongue weight capacity

HEAVY-DUTY: Made with heavy duty steel, sand blasted and coated with a durable silver-vein powder coat. Safely tow heavy loads up to 10,000 lbs.

VERSATILITY: Raise or Drop your hitch up to 7.5”. Dual receivers results in options for multiple applications at the same time such as a standard ball mount, luggage rack, motorcycle carrier, cargo rack and more.

SAFETY: All GEN-Y products are made right here in the USA, and are rigorously tested and exceed the SAE-J684 Weight Testing Requirements.

200 lb. tongue weight capacity of bumper adapter.

Heavy-duty adapter bolts onto existing 4” x 4” RV bumper.

This bumper adapter is NOT intended for towing purposes.

Our Integrated 4 Point Sway Control provides the highest level of resistance to your trailer's attempts to sway. There is no other hitch on the market that offers as much sway control as the Equal-i-zer.

The Equal-i-zer hitch’s weight distributing design effectively transfers trailer tongue weight to all the axles and helps keep the front of the tow vehicle firmly on the road.

The Equal-i-zer hitch gives you a safer ride by providing both sway control and weight distribution. This provides better steering, braking, and sway control, which help eliminate stressful driving situations and work to keep your family and your investment safe on the road.

2.5" SOLID SHANK 20,000 LB.TOWING

ADJUSTABLE PINTLE RING/LUNETTE, LOCK/ATTATCHMENT

THE MOST HEAVY DUTY HITCH ON THE MARKET

FITMENT：This bumper trailer hitch is equipped with a standard 2 inch x 2 inch hitch receiver, it will compatible with 4"- 4.5" square bumpers, please check the size carefully before purchasing.

CONDITION: Color: Black. Material: Alloy Steel. Surface Finish: Powder Coated. This bumper trailer hitch is wear resistance, durable, not easy to damage, fully able to meet your use needs.

FUNCTION: This bumper trailer hitch is the good ideal for lightweight applications such a bike and cargo racks,cargo racks, allows 200 Ib tongue weight capacity. Not intended for towing purposes.

Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go.

Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.

Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.

Travel Trailer Hitch; Easy to Install

2 inch Receiver Opening

More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting products-it's amazing what Buyers Products can do for your truck

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer

EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide

TOW HITCH - Standard square tube hitch receive: 2”x2”.

DURABLE - Reinforced tow hook holes.

HIGH CAPACITY - Rated for 5000 lbs. load.

【 STANDARD FIT 】 Fits standard 4" x 4" RV or travel trailer bumper/beam, use for both downside and upside, the bolts Need to be secure tightly around the travel

【 2 INCH RECEIVER FIT 】Accept hitch mount with 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories

【 CAPACITY 】 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for RV level Trailer towing Purpose

U-Bolts onto a 4" square RV bumpers and accepts 2" cargo carrier tubes

Rugged powder coated steel with zinc plated hardware included

100lb tongue weight capacity

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing

EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper

DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

Steel construction works on 4 inch square RV Bumpers

Powder-coated rust resistant finish, Zinc Plated Hardware

2 inch Standard Hitch Receiver Tube for Ball Mount, Bike Rack or Cargo Rack Mounting

【3-IN-1】New towing function, also meet the needs of wall mount and trailer. Fit for garage plank walls, concrete walls, trucks, flatbeds, snowmobiles, lawn mowers and tractor hitch panels.

【MAXIMUM GROSS TRAILER WEIGHT OF 15000LBS 】Maximum vertical tongue load of 2,000 lbs. Double reinforcement of corner brace plate, pins anti-sway fixed, ensure a stable journey.

【4-HOLE EASY INSTALLATION】Fit standard 4-hole pintle hook pattern (bolts&screws are NOT included), bolt this tube weldment to the hitch plate using four 1/2" grade 8 bolts, lock washers and nuts.

[HEAVY DUTY HITCH RECEIVER] This heavy-duty U-bolt mounts onto a 4" square RV bumpers and works with 2" cargo carrier or bike rack tubes. It is designed for holding gear - not for towing.

[EASY INSTALLATION] This high-quality automotive accessory is quick to install on an RV, saving you time and stress.

[DURABLE DESIGN] Powder-coated steel helps to resist rust and corrosion, allowing this piece to withstand the elements while providing longevity.

This RV bumper hitch fits 4 inch x 4 inch RV or travel trailer bumper, use for both downside and upside

The RV bumper hitch adapter accepts hitch mount of 2 inch receiver shank such as bike racks, RV tire carriers, cargo carriers or other accessories, could offer a low hitch mount to provide RV trailer towing

Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for towing purposes

✅【Specification】Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.

✅【Easy Installation】No need for complicated welding to make the RV Hitch Receiver work. Attaches to Bumper Using U Bolts (included). Bolts Need to be Secure Tightly Around the Travel Trailer Bumper

✅【Sturdy & Durable】Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the BATONECO Trailer Receiver to do its job every time.

Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!

VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs.

200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).

Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!

DEPENDABLE STRENGTH: This RV trailer hitch is rated for 3, 500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).

RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer

EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide

Please check the product dimension before purchase. Extender Length (receiver hole to shank hole): 7" or 9". It has two holes on the 2" shank.★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories (bike racks / carrier, cargo carriers, etc.)

HITCH RISER OR DROP: 10 inch drop or rise can be turned up or down to level the towing system

ADJUSTABLE LENGTH: 2 pin holes design makes this adjustable trailer hitch have 2 active length (7" & 9" hole to hole length) and avoid interfere with the vehicle bumper

Attention: The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL

Fit for hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity

This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )