Best Superatvcom Bumper Hitch in 2026

Custom designed to be compatible with factory bumper of 2007-2018 Jeep wrangler (Both 2 door & 4 door models.)

For Rubicon X & 10th Anniversary models reinstall using factory hardware

2 inch receiver with ratings of 3500 Lb Gross Trailer Weight; 350 Lb Tongue Weight.

Custom designed to be compatible with factory bumper of 2007-2018 Jeep Wrangler JK (Both 2 door & 4 door models.) Not compatible with JL.

2 inch receiver with ratings of 3500 Lb Gross Trailer Weight; 350 Lb Tongue Weight.

Black powder coated for long lasting corrosion resistance.

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing

ADD SPARE SPACE: This receiver hitch extender can extend to 7 inch length, add spare space between your bumper beam and your hitch mount bike rack or cargo carrier

RECEIVER SIZE: This trailer hitch extension bar has 2 inches by 2 inches industry-standard fit

HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500 lbs GTW and 350 lbs TW

COMPATIBILITY: Rear receiver hitch compatible with 2007-2018 Jeep wrangler JK 2 door & 4 door (NOT for JL Models)

HUGE TOWING CAPACITY: This trailer hitch receiver is made from all-in-one, heavy duty thick tube for immense strength; Features 3,500lbs. gross trailer weight and 350lbs. tongue weight

EASY INSTALLATION: All mounting hardware and plug & play wiring harness are included; Comes with the hitch cover to protect the receiver tube from mud and dirt when not in use

The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.

Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.

The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.Main Body:Square

【Fits】Fits 2019+ Honda Talon 1000R / 2019+ Honda Talon 1000X / 2020+ Honda Talon 1000X-4

【Durability】Our UTV Receiver Hitch is made with heavy-duty 3/16” steel plating and is hand welded for maximum strength and durability. A Honda receiver hitch is an essential tool for any UTV. Haul more every day and get work done with a SuperATV UTV Hitch Receiver.

【Versatility】This Talon hitch uses a standard 2-inch by 2-inch receiver. Attach a variety of Honda Talon 1000 accessories to put the utility back into UTV. Use our bumper hitch to attach a cargo rack, dirt bike rack, step up, or trailer to make your Talon 1000 more versatile than ever. |NOTE: Max Towing Capacity is 1500 lbs. |Not for use with hitch-mounted spare tire carriers.

Allows you to mount hitch-mounted accessories to your RV bumper

Fits a 4-inch square RV bumper

Clamps in place- no drilling or permanent installation

REAR 2" RECEIVER HITCH: - Standard 2 inch square receiver with a Rating of 3500 Lb Gross Trailer Weight and 350 Lb Tongue Weight, is made of unique all-in-one heavy-duty thickness tubes

COMPATIBILITY: - Rear receiver hitch Compatible for 2007-2018 Jeep wrangler JK 2 door & 4 doors. (Exclude JL Models)

RUGGED CONSTRUCTION: - Heavy Duty Steel Construction Thick Welds for Superior Strength Built for Long Lasting Durability and Rust-resistant, Black powder coated for long lasting corrosion resistance

Attention: This accessories is NOT intended for RV level Trailer towing Purpose, PLEASE BE CAREFUL to using

[STANDARD FIT] This hitch receiver has 2" x 2" tube opening. Fits most of bike racks, cargo carriers with 2" shank. It has a 200 lbs tongue weight capacity. 5/8" hitch pin or hitch lock not included

Simplified Installation Fits: 4 inch X 4 inch Square Bumpers (Can be Mounted Upside Down).Bolts Need to be Secure Tightly Around the Travel Trailer Bumper

ADDED CLEARANCE. This trailer hitch extension adds 18 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer

STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver

SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight

★Please check the product dimension before purchase. Extender length: 7" or 9". The 2" shank has two pin holes. ★RECEIVER SIZE: This trailer hitch extension riser has 2 inch by 2 inch industry-standard receiver, fits for most 2-inch shank of ball mounts and hitch accessories. ★ Please tightening the anti-rattle bolt after inserting into the 2 inch shank into the receiver. Recommend to use anti-rattle hitch pin or hitch lock for bike racks or cargo carriers.

★HITCH RISER OR DROP HITCH: 4.25 inch drop or rise can be turned up or down to level the towing system.

★ADJUSTABLE LENGTH: 2 pin holes design makes this drop trailer hitch have 2 active length and avoid interfere with the vehicle bumper

Heavy-duty adapter bolts onto existing 4" x 4" RV bumper

Accepts 2" cargo carrier tube

200 lb. tongue weight capacity

Multifunctional: 2 receiver tubes can be used not only for truck trailers but also for lawn mowers, lawn tractors, and walls, with a variety of scenarios for you to choose from.

Product Quality: Made of heavy-duty steel, improving traction safety; The surface is coated with black powder coating, which has rust and corrosion resistance.

Easy Installation: You can quickly and easily connect the hook receiver to your device.

MaxxHaul Hitch Receiver Adapter instantly provide a 2" x 2" receiver for RV bumper and has a 200-lb tongue weight capacity

This hitch receiver is designed for RV bumpers with 4"- 4. 5" square bumpers

Universal Design - Is compatible and accept hitch mount accessories with 2" shank such as bike racks, RV tire carriers, hitch step and other accessories.

HEAVY-DUTY: Made with heavy duty steel, sand blasted and coated with a durable silver-vein powder coat. Safely tow heavy loads up to 10,000 lbs.

VERSATILITY: Raise or Drop your hitch up to 7.5”. Dual receivers results in options for multiple applications at the same time such as a standard ball mount, luggage rack, motorcycle carrier, cargo rack and more.

SAFETY: All GEN-Y products are made right here in the USA, and are rigorously tested and exceed the SAE-J684 Weight Testing Requirements.

Super Quality: Mega Shackle Hitch Receiver Set Was Made of High-Strength Drop Forged Steel, The Straight-line Pull of Up to 17,000LBS and 68,000LBS of Max Breaking Strength to Keep It Safety & Stability

Fitted Suite: 2" Shackle Hitch Receiver, Anti-Theft 5/8" Trailer Hitch Lock Pin, 3/4" D-ring Mega Shackle with Shackle Isolator & 4Pcs Washers kits, Protect The Bumper From Scratches and Prevent Rattling and Stolen

Multiple Safeguard: Hitch Receiver for Prevent Rust and Corrosion By Galvanized & Powder Coated Plating and Withstands Harsh Weather Conditions

DEPENDABLE STRENGTH. This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 5,000 lbs. weight distribution capacity and 500 lbs. weight distribution tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling

200 lb. tongue weight capacity of bumper adapter.

Heavy-duty adapter bolts onto existing 4” x 4” RV bumper.

This bumper adapter is NOT intended for towing purposes.

ADDED CLEARANCE. This trailer hitch extension adds 8 inches of extra length to your hitch receiver, providing additional clearance between your bumper and hitch accessory or trailer

STANDARD FIT. This receiver hitch extension bar has a 2-inch x 2-inch shank to fit any industry-standard 2-inch trailer hitch receiver

SOLID STRENGTH. This 2-inch receiver hitch extension is constructed from high-strength steel to ensure reliable towing for the road ahead. It is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight

1-1⁄4 in. Square Receiver Tube Opening

Rated Up To 3,500 lbs. Gross Trailer Weight (GTW) And Up To 300 lbs. Tongue Weight (TW)

All Hitches Are Designed For Customers With Passenger Cars And Sport Utility Vehicles

Fits: 2020+ Kawasaki Teryx KRX 1000 | NOTE: Not compatible with Kawasaki rear bumper. Compatible with SuperATV rear bumper. | Fits standard 2" attachments | NOTE: Max towing capacity is 1,500 lb. Not for use with hitch-mounted spare tire carriers

Make Work Easy: Made with heavy-duty 3/16” steel plating and is hand welded for maximum strength and durability. A receiver hitch is an essential tool for any UTV whether you’re hauling ass or hauling a trailer.

Towing Capacity: Max towing capacity is 1500 lb

Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go.

Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.

Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.

【Adaptability】The tow hitch designed to be compatible with factory bumper of 2018-2021 Jeep wrangler JL/JLU (Both 2 door & 4 door models.)

【Heavy Duty】Jeep wrangler towing hitch receiver with ratings of 3500 Lb Gross Trailer Weight, 350 Lb Tongue Weight.

【Updated Hitch Cover】The updated tow receiver square ring stays the 2 inch hitch tube plug in place. No worry about cover cap falling in driving. Keep mud dirt and pests out!

FITMENT：This bumper trailer hitch is equipped with a standard 2 inch x 2 inch hitch receiver, it will compatible with 4"- 4.5" square bumpers, please check the size carefully before purchasing.

CONDITION: Color: Black. Material: Alloy Steel. Surface Finish: Powder Coated. This bumper trailer hitch is wear resistance, durable, not easy to damage, fully able to meet your use needs.

FUNCTION: This bumper trailer hitch is the good ideal for lightweight applications such a bike and cargo racks,cargo racks, allows 200 Ib tongue weight capacity. Not intended for towing purposes.

Please check the size carefully before buy this hitch extension rise/drop; Fit All 2 inch square receivers hitch tube, (less than 6" horizontal from hitch to bumper and 13-15“ to ground are recommended

2in tow hitch extension rise for class 3 or 4 hitch receiver

Features a 6.25 inch drop down hitch to accommodate vehicles that are too high or too low

2.5" SOLID SHANK 20,000 LB.TOWING

ADJUSTABLE PINTLE RING/LUNETTE, LOCK/ATTATCHMENT

THE MOST HEAVY DUTY HITCH ON THE MARKET

Our Integrated 4 Point Sway Control provides the highest level of resistance to your trailer's attempts to sway. There is no other hitch on the market that offers as much sway control as the Equal-i-zer.

The Equal-i-zer hitch's weight distributing design effectively transfers trailer tongue weight to all the axles and helps keep the front of the tow vehicle firmly on the road.

The Equal-i-zer hitch gives you a safer ride by providing both sway control and weight distribution. This provides better steering, braking, and sway control, which help eliminate stressful driving situations and work to keep your family and your investment safe on the road.

Accepts standard 2 inch receiver bars

Carries 350 pounds tongue weight and 3,500 pounds gross trailer capacity

Bolts to most factory step bumpers for an easy installation