Best Hitchhammer in 2026

2 Sizes Available

STANDARD SIZE 11.5” WIDE / Designed for 2” Hitch receivers

XL SIZE 14” WIDE / Designed for 2” Hitch receivers

US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual. | FITMENT - Compatible with 1999-2006 Chevy Silverado 1500 (Do NOT fit 1500 HD models); Compatible with 1999-2006 GMC Sierra 1500 (Do NOT fit 1500 HD models); Fit also for 2007 1500LD Classic models

Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.

Pre-welded light mount channel for optional LED lights(Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed.

TYGER patented Hitch Armor provides easy access to storage area. Dual girder system provides maximum protection from rear-end collisions.

Only fits on 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation. Free pin lock & stabilizer are included.

Heavy-duty 2inch diameter & 0.120inch wall thickness tubes; Dual stage powdercoated textured black finish.

1 Premium Round Ramp Door Bumper (screw not included)

Approximately 2.5" round, 1" thick; Trailer Ramp Door Round Bumper

Round rubber bumper offers extra protection from ground dings and scratches; Universal fit for many applications, 3/8" screw hole (screw not included)

4 Premium Round Ramp Door Bumpers (screws not included)

Approximately 2.5" outer diameter, 1" thick; Trailer Ramp Door Round Bumper Set

Round rubber bumper offers extra protection from ground dings and scratches; Universal fit for many applications, 3/8" screw hole (screws not included)

The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.

Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.

The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.

SUPER WIDE Bumper Protection Area measuring 46" x 12" - The Largest Bumper Protector!

High Intensity Safety Reflectors make the BumperBully stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations

STEEL REINFORCED SECURITY STRAPS – Help Deter Theft – Ultra Heavy Duty

At 14" EXTRA WIDE x 8.5" HEIGHT X 2.25" THICK - BumpShox XL is Designed To Be Taller and Wider Than a Standard License Plate Frame

TOUGHER THAN STEEL – V-Tech All Weather Foam ** Will NOT Crack or Rust Like Metal or Plastic License Plate Frames **

RECESSED SCREW DESIGN - No Protruding Metal Parts That Can Damage Another Vehicle's Bumper

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing

Country Of Origin :United States

Package Weight: 1.429 Kilograms

Product Type : Auto Accessory

Oe Spec Or Performance/Custom: OE Spec, Year: 2014 2015 2016 2017 2018, Certifications: OE, Make: Compatible with Dodge

Manufacturer Part Number: 82213744, Manufacturer Warranty: 2 Year, Custom Bundle: Yes

Returns Accepted: Returns Accepted, Oe/Oem Part Number: 82213744, Modified Item: No

US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual.

Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.

Pre-welded light mount channel for optional LED lights(Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed.

Patented Top Stabilizer Bars – Keeps Product Flat on the Bumper

Premium Quality Material – All Weather Protection

Impact Absorption Zones – Raised Ribs Cushion Minor Parking Bumps

🚗 Feature: The car door protector strips can against fire and water, it is resistant to abrasion, oil, and superior heat preservation, effectively guard your car against bumps and scratches damaging your vehicle's door, bumper, bodywork, and other places.

🚙 Ultra Thickness: Compare to other brand product, our protector strips is 1.18-inch thickness, the service life of up to 5 years, can be better to provide full protection for your car, prevent damage caused by any moderate impacts.

🚚 Premium Quality: Made of Eco-friendly high-quality EVA Foam with strong adhesion tape backing, durable and easy to clean, easier installation on almost all smooth surfaces including plaster, wood, metal, concrete, etc.

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )

For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity

The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

Patented Top Stabilizer Bars – Keeps Product Flat on the Bumper

Premium Quality Material – All Weather Protection

Impact Absorption Zones – Raised Ribs Cushion Minor Parking Bumps

Allows you to mount hitch-mounted accessories to your RV bumper

Fits a 4-inch square RV bumper

Clamps in place- no drilling or permanent installation

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

Multi-functionality--- Eapele hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. And this step has the added bonus of functioning as a tow point to attach heavy-duty tow straps.

Works with 2" Receivers---2” square connector. There is also an included pin which can be used to prevent slipping down.

Powder-coated Solid Steel--- Extremely strong, 10,000 lbs rated tow strap capacity. The powder-coated steel is weatherproof and durable, it should last for years. Ridges offer sure footing with non-skid surface.

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

MaxxHaul Hitch Receiver Adapter instantly provide a 2" x 2" receiver for RV bumper and has a 200-lb tongue weight capacity

This hitch receiver is designed for RV bumpers with 4"- 4. 5" square bumpers

Universal Design - Is compatible and accept hitch mount accessories with 2" shank such as bike racks, RV tire carriers, hitch step and other accessories.

Added protection against scuffs, nicks, scratches, and other damaging marks

Textured surface provides slip resistance

Quick and easy no-drill installation with the use of self-adhering 3M Tape

48" x 12" Bumper Protection Area *** WEATHER RESISTANT RUBBER MATERIAL ***

Waterproof Steel Reinforced Straps - SRS Straps (Helps Deter Theft)

2" EXTRA Thick Hi-Density Foam Core - ULTRA BRITE Silver Safety Strip

US design patented TYGER Guard ! The kit includes one bumper guard and all mounting hardware and DIY installation manual. | FITMENT - Compatible with 2010-2018 Jeep Wrangler JK 2 Door & 4 Door (Excl. Winter Edition); Not for JL model.

Made of heavy-duty 2.5inch tubing frame with durable E-coating textured black finish for rust resistance and customized look! Seamless welding for a strudy structure.

Pre-welded light mount channel for optional LED lights(Lights excluded in the kit). Two pre-drilled mounting holes for license plate relocation if needed.

DURABLE BUILD - Tubular steel in black epoxy powder coating to promote high strength and a lightweight design. It is rated for 500 lbs.

OVERALL DIMENSIONS - 60"(L) x 20"(W) x 6"(H).It also features a mesh base to easily clean up messes.

ADDED GROUND CLEARANCE. This cargo hitch carrier is equipped with an angled shank. This provides additional ground clearance for offroad vehicles or low-riding vehicles