Best Powder Coated Towing Hitch Steps in 2026

Multi-functionality--- Eapele hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. And this step has the added bonus of functioning as a tow point to attach heavy-duty tow straps.

Works with 2" Receivers---2” square connector. There is also an included pin which can be used to prevent slipping down.

Powder-coated Solid Steel--- Extremely strong, 10,000 lbs rated tow strap capacity. The powder-coated steel is weatherproof and durable, it should last for years. Ridges offer sure footing with non-skid surface.

Fits on all 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation NOTE: The running board and bracket sometimes might divided in 2 different boxes by carrier. They might not arrive on the same day. Please wait 1 - 2 business days to receive the 2nd package. 

Free pin lock & stabilizer are included

Heavy-duty steel tubing; Dual stage powder coated textured black finish;Solid All-Welded Design & Construction for Maximum Strength & Safety

Heavy duty steel hitch step, acts like bumper guard for maximum protection from rear end collisions.

Heavy duty powder coated for long lasting corrosion protection and high visibility.

Extra wide (12" wide) step area w/ non-slip tread.

Fits 2" receivers and provides easy access to a truck bed, SUV and/or roof rack

Easily installed within minutes. No tools required. Construction- Mild steel

Offers protection to vulnerable, molded bumpers in the event of a collision

Functionality--- Eapele hitch step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient, improves rear access to your truck beds or racks.

Fits 2" Receivers---2” square connector. Overall Dimensions: 15.3"(L)x 10.5"(W)x2.5"(H). Includes hitch pin and clip which can be used to prevent slipping down.

Powder-coated Solid Steel--- Extremely strong 8GA thick steel, 400lbs maximum load. Powder-coated to be weatherproof and durable, it should last for years.

10,000lbs maximum capacity

Built-in step for easy access to truck bed

Black powder coated finish

Fits on all 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation

Free pin lock & stabilizer are included

Heavy-duty steel tubing; Dual stage powder coated textured black finish;Solid All-Welded Design & Construction for Maximum Strength & Safety

- Our MaxxHaul Hitch Step features a 5” x 13-3/4” wide step that has a non-slip surface to create instant step for easy cargo access.

- Constructed from high-impact nylon, it Will help reduce if not prevent costly bumper repair caused by either gently backing up to another vehicle or hitting a wall, post or another vehicle when parking. A must for pick-up, van or SUV owners with 2” hitch receiver.

- Fits standard 2” hitch receiver

DURABLE CONSTRUCTION: ---Weight Capacity: 220 LBS. This hitch step is made of solid iron with durable black ED coating + powder coat finish for long-lasting corrosion resistance. It offers all-weather protection for your car's bumper.

PROVIDES EASY ACCESS : --- To truck beds, roof racks and SUV interiors. Once secured, the hitch step provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.

UNIVERSAL: --- Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch; Step pad is 23-1/2” in length and 4” wide, 6” tube with 5 holes for adjustable length, Hitch hole 1/2 inch.

UNIVERSAL FITMENT：Fits on Car/Truck/Vehicles with 2 inch hitch receiver. Weight Capacity: 350 LBS

USER-FRIENDLY DESIGN：With slip-proof design and free pin lock & stabilizer included.Nilight hitch step bar provides a secure and comfortable step for you

STURDY AND TOUGH：This bumper guard procter is made with heavy-duty 2 inch diameter and 0.120inch wall thickness tubes, Dual stage powder coated textured black finish

High quality constructed step accessory that fits interlock and traditional twin wrench flats to Reese Towpower ball mounts

Slip resistant tread surface with raised edges

Integrated adapter for ball mount versatility for use while towing

SOLID CONSTRUCTION - Solid all-welded design and construction for maximum strength. The powder coated finish featured with long durable use. It is not easy to be corrosed and rusted.

SAFETY - The hitch pin & clip and on-slip polyethylene step pad prevent slipping down. The maximum weight capability is 350 lbs, which is able to withstand road abuse and heavy duty towing purposes to it's specified capacities.

HIGH PERFORMANCE - You can haul a lot of stuff in your pickup truck's bed. Climbing into the vehicle to put your cargo on and out safely. It also offer protection to vulnerable, moulded bumpers in the event of a collision.

Large 8" x 18" platform.

300lb. load capacity.

Chemical resistant non-skid surface.

Steel step pad area with fish mouth design effective anti-skid. Overall Dimensions: 11.22"(L)x 5.9"(W)x2.17"(H). The hitch step can bear a weight of 450 pounds. Strong steel composition and really durable.

Works with 2" Receivers---2” square connector. Hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient.

Easy Installation ，Use of a plug-and-play helps with quick, effortless installation. Simply slide it into the receiver, then into the hook and tighten it, no drilling or cutting needed.

CONVENIENT. This hitch step provides a useful step up on your vehicle wherever and whenever you need it! Mounted on a CURT channel mount, it offers a 16-inch wide stepping surface for easier access to your truck bed or under the hood

CHANNEL MOUNT. This versatile receiver hitch step mounts on virtually any 2-inch or 2-1/2-inch trailer hitch receiver. All you need is a CURT channel mount. This package includes the step only; channel mount sold separately

ADJUSTABLE. This truck hitch step is highly adjustable when mounted on a CURT channel mount, able to be raised or lowered as needed to accommodate your own specific vehicle and needs

✔️Step measures 12" in width providing easy access to bed of truck and protection from rear-end collisions.

✔️ 2 Sizes Available to fit 2" OR 2.5" Receivers

✔️ Press formed out of 3/16" Steel with a Weight Capacity of 500 LB

PRECISE FIT: OEDRO hitch steps are compatible with all 2-inch hitch receivers; The unique step design enhances your vehicle’s functional appearance and offers easy access to storage area (Please check the hitch receiver size if you’re not sure which size you have)

UPGRADED MATERIAL: We only offer high quality products; OEDRO hitch steps are made from upgraded aluminum alloy with double-layer black coating and stainless steel silver textured panel; Product is slip-proof and resistant to rust, UV, and collisions; Suitable for all weather conditions

EASY-TO-CLEAN & AMPLE LOAD CAPACITY: Built from black aluminum alloy steel pipe and thick silver textured panel to form an 8.27’’ wide step area; Bears loads of up to 350LBS; Compared to traditional designs, this silver panel is easier to clean and increases ground clearance

Package Including: 1* hicth step, 1* hitch lock, 1* hitch key. Only fits on 2-inch hitch receiver. Weight Capacity: 400 LBS.

Hitch Step for Trucks/SUVs with 2" Hitch Receiver Fit Car/Truck/Vehicles with 2 inch Hitch Receiver.

Heavy-duty 2inch diameter & 0.12-inch wall thickness tubes; Dual-stage powder-coated textured black finish.

Unique design gives the vehicle a rugged off road look while being a stylish accent for today's vehicles

Rugged tread pattern provides for safe and attractive non-slip surface made of corrosion resistant, durable cast aluminum alloy

Carr's new Xtreme black powder coat finish features a lightly textured matte finish that resists scratching, peeling and fading

UNIVERSAL APPLICABILITY - Our hitch step is compatible with 2" hitch receiver of all car/ truck/ Vehicles. If your car has a reverse sensor, please note whether the size of our tow hitch step will conflict with the sensing range of your sensor.

PREMIUM PROCESS - Made of strong and heavy-duty 2.36" square tubes, the bumper step with black powder-coated provides better rusting and corrosion resistance. The anti-slip and high-impact 16.6" step makes getting on and off easily on the truck bed step. With the maximum size of 28 x 7.7 x 5.8 inch (L x W x H), the tow hitch step improves the carrying capacity up to 350lbs.

USER-FRIENDLY DESIGN - With slip-proof design and 4 locking pin lock positions, LONGSUN hitch step provides a secure and convenient step for you to visit your truck beds or racks.

Fit For: Universal fit 2" Hitch Receivers

Powder Coated Black, 37" Length x 3" Height x 4" Width

350 lbs Weight Capacity

Heavy-Gauge Material The product is cut from 13GA thick top-notch metal. Black powder paint for rust-resistant to go through the entire summer of heat and rain. Sturdy enough to support the car's rear. The hitch is made with a steel surface, and black matte powder-coating treatment, more stable and durable in structure, beautiful, and anti-corrosion. Quality metal hitch for car usage. It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Rack, Or Rear Cargo Area Of A Vehicle.

Universal Fit The black steel-made bump step can be mounted to most vehicle with a standard 2 inches receiver trailer hitch. It can be used as a step to reach the roof of the vehicle or to defend the bumper against rear-end accidents, dents, and scratches. This is a 2” square connector. Overall Dimensions: 15.3"(L)x 10.5"(W)x2.5"(H). Includes hitch pin and clip which can be used to prevent slipping down. The sleek and simple design make it more clear-cut and safe to use in outdoor environments.

Strong Bump Guard Not only makes accessing the cargo in the back or on top of your truck safer, more convenient, and less strenuous, but it also can save your car from damage during a low-speed rear-end accident. The hitch step would protect your vehicle's bumper and avoid scratching when the car behind or the rear car hits the rear wall. The product delivers a unique, outstanding, and functional appearance to your vehicle.

Fit For: Universal fit 2" Hitch Receivers, 36" Length

Powder Coated Black

350 lbs Weight Capacity

12" Raptor-style

Exclusive injection-molded, non-slip tread step pad

Easily installed into a 2" Hitch Receiver

【Universal Fitment】 Compatible with 2-inch rear hitch receiver, install fast with no drilling and removing（Including safety locks and stabilizers)

【Heavy Duty Hitch Step】 Size for Length: 25". Width: 7". Height: 6.5". Make of 0.12 inch wall thickness tubes with black powder coated finish, durable durability and rust resistance, carrying capacity of up to 400 lbs.

【Unique Double Sides Design】 Change the pattern easily as your favor, both side has non-slip design, the height of the pedal can adjusted 4 inch（via converting two sides)

Fit For: Universal fit 2" Hitch Receivers

Powder Coated Black, 28" Length x 3" Height x 4" Width

350 lbs Weight Capacity

Quick-fit step - assist for ease of access into the rear of SUV’s and trucks

Elegant styling with seamless sealed steel end caps.

Unique tapered mild steel tube 4” wide by 3.5” high at its highest.

??Universal fits for 2 inch Receivers:?Hitch step is customized for standard 2in receiver, compatible with Chevy, Ford, Toyota, GMC, Dodge RAM, Jeep

??Sturdy and Protects:?Sammanlight hitch step is crafted from sturdy heavy duty metal with black powder coat finish, which is protect the hitch mount from rust and corrosive. It makes a nice addition to your vehicle, adding a little something to the overall appearance of your vehicle, also prevent your bumper from damaging when someone parking behind your vehicle

??Non-slip Plastic Cover:?Truck hitch step with plastic cover, providing non-slip support

A must have item for your vehicle, this hitch step help you to gain easy access to the truck bed, roof rack.

Adds extra bumper protection for your bumper in case someone slides into you during winter season.

Receiver hitch step crafted from heavy-duty black powder coated steel to withstand rust, corrosion, hold weight up to 350 LBS.

Makes it easy to load or unload your truck bed; acts as a buffer to protect your bumper in collisions; extends your 2" hitch

Measures 13" L x 7.5" W x 4" H

Easy installation; rubber traction for excellent grip in all weather conditions