Best Pm Performotor Hitch Steps in 2026

TYGER patented Hitch Armor provides easy access to storage area. Dual girder system provides maximum protection from rear-end collisions.

Only fits on 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation. Free pin lock & stabilizer are included.

Heavy-duty 2inch diameter & 0.120inch wall thickness tubes; Dual stage powdercoated textured black finish.

Textured Powder-coat Finish

Compatible with any 2" Hitch Receiver

Boot Scraper

Solid steel construction

Ridges provide non-slip traction for use as step

Large center hole works with all our 3" heavy duty straps

MORE STABILITY — This stabilizer gives you the ground support you need to eliminate unwanted bounce and instability when going in and out of your RV.Fit Type: Universal Fit

PROTECTION — The Solid Stance even helps protect your bottom entry step from wear and sagging

ADJUSTABLE — Compatible with height ranges of 5” to 14”, this kit comes with dual, individually adjustable legs that have four adjustment angles to adapt to uneven terrains

Multi-functionality--- Eapele hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. And this step has the added bonus of functioning as a tow point to attach heavy-duty tow straps.

Works with 2" Receivers---2” square connector. There is also an included pin which can be used to prevent slipping down.

Powder-coated Solid Steel--- Extremely strong, 10,000 lbs rated tow strap capacity. The powder-coated steel is weatherproof and durable, it should last for years. Ridges offer sure footing with non-skid surface.

Features precision, stainless steel pivot pins for rock solid stability and bombproof, die cast, aluminum alloy linkage components

Anodized and coated to resist corrosion

Rigid, non slip, glass reinforced composite step pad for safe footing even in mud, snow or wet conditions

ADDED STABILITY — Built with an extra-wide top step, aluminum step treads and adjustable legs that can adapt to uneven surfaces

EASY STORAGE — When you’re ready to hit the road, all you have to do is fold your Solid Step up right into your RV’s entry doorway, it’s that easy

OPTIMAL SAFETY — Recessed feet at the bottom of the step help prevent tripping hazards — plus, the no-bounce, steel steps provide more stability

Fits on all 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation NOTE: The running board and bracket sometimes might divided in 2 different boxes by carrier. They might not arrive on the same day. Please wait 1 - 2 business days to receive the 2nd package. 

Free pin lock & stabilizer are included

Heavy-duty steel tubing; Dual stage powder coated textured black finish;Solid All-Welded Design & Construction for Maximum Strength & Safety

Bump Step: it is widely used to gain easy access to the truck bed, luggage racks, or rear cargo area of a vehicle. Hitch steps double-up as bumper guards and can protect against damage from low impact rear-end collisions.

Durable Construction: the sturdy hitch step is manufactured using 16-gauge steel to withstand extreme compressions. The non-slip, high-impact rubber step pad adds to the overall strength of the access step

Easy Installation: use of a plug-and-play helps with quick, effortless installation. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times

Made in the USA!

Includes: 1 BumpStep USA & 1 Stainless Steel Hitch Pin

Fits standard 2" receiver hitch.

Heavy duty steel hitch step, acts like bumper guard for maximum protection from rear end collisions.

Heavy duty powder coated for long lasting corrosion protection and high visibility.

Extra wide (12" wide) step area w/ non-slip tread.

An instant, multi-use step that provides dogs and people better access to your SUV

Install once, step twists under car for storage, with no need to remove after each use

Fits 1.25-inch and 2-inch hitch receivers and allows for 6 inches of height adjustment

Fits 2" receivers and provides easy access to a truck bed, SUV and/or roof rack

Easily installed within minutes. No tools required. Construction- Mild steel

Offers protection to vulnerable, molded bumpers in the event of a collision

Universal: Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch. (Bonus Pin Lock and Stabilizer which are value $8) Can be used as a step to reach the roof of the vehicle or to defend the bumper against rear end accidents, dents and scratches.

Useful Essential: Juegoal rear bumper guard is great option worth the buck, it is quite convenient for use at the parking area. It does not eat up extra space by protruding above the bumper.

Solid Construction: The premium quality material used in the construction further makes it extremely durable and sufficiently long-lasting. Of course, it offers all-weather protection for your car's bumper.

Functionality--- Eapele hitch step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient, improves rear access to your truck beds or racks.

Fits 2" Receivers---2” square connector. Overall Dimensions: 15.3"(L)x 10.5"(W)x2.5"(H). Includes hitch pin and clip which can be used to prevent slipping down.

Powder-coated Solid Steel--- Extremely strong 8GA thick steel, 400lbs maximum load. Powder-coated to be weatherproof and durable, it should last for years.

10,000lbs maximum capacity

Built-in step for easy access to truck bed

Black powder coated finish

Fits on all 2 inch hitch receiver. Weight Capacity: 350 LBS. Easy plug in installation

Free pin lock & stabilizer are included

Heavy-duty steel tubing; Dual stage powder coated textured black finish;Solid All-Welded Design & Construction for Maximum Strength & Safety

It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions

Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step

Easy Installation: Use Of A Plug-And-Play Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times

- Our MaxxHaul Hitch Step features a 5” x 13-3/4” wide step that has a non-slip surface to create instant step for easy cargo access.

- Constructed from high-impact nylon, it Will help reduce if not prevent costly bumper repair caused by either gently backing up to another vehicle or hitting a wall, post or another vehicle when parking. A must for pick-up, van or SUV owners with 2” hitch receiver.

- Fits standard 2” hitch receiver

INNOVATIVE DESIGN -Deliver a unique, outstanding and functional appearance to your vehicle.

WIDE STEP AREA -Massive 7.3" wide and 26" length with 6" Drop solid step area with safe, comfortable and non-skid footing to access your camper, roof rack and truck bed.

SURFACE FINISH -Matte light texture coating, best rusting and corrosion resistance. Premium Quality UV Resistance.

UNIVERSAL --- Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch; Step pad is 11-4/5” in length and 4” wide, 6” tube with 5 holes for adjustable length, Hitch hole 1/2 inch; Weight Capacity: 220 LBS.

PREMIUM MATERIAL --- This hitch step is made of solid iron with durable black ED coating + powder coat finish for long-lasting corrosion resistance. It offers all-weather protection for your car's bumper.

APPLICABLE SCOPE --- To truck beds, roof racks and SUV interiors. Once secured, the hitch cover provides access to your truck bed, roof racks, and in the case of an SUV, the rear cargo area.

UNIVERSAL FITMENT：Fits on Car/Truck/Vehicles with 2 inch hitch receiver. Weight Capacity: 350 LBS

USER-FRIENDLY DESIGN：With slip-proof design and free pin lock & stabilizer included.Nilight hitch step bar provides a secure and comfortable step for you

STURDY AND TOUGH：This bumper guard procter is made with heavy-duty 2 inch diameter and 0.120inch wall thickness tubes, Dual stage powder coated textured black finish

Built from 4" Oval Heavy-Duty Tubing with a high-traction molded step pad

Large 24" Wide Step pad

Easily installed into a 2" Hitch Receiver

Fit any vehicle with a standard 2" receiver hitch.

POFENZE patented hitch step provides easy access to storage area and provides maximum protection from rear-end collisions.

It is welded by 4"square steel tube and has anti-skid step pad, so strong and safe enough

High quality constructed step accessory that fits interlock and traditional twin wrench flats to Reese Towpower ball mounts

Slip resistant tread surface with raised edges

Integrated adapter for ball mount versatility for use while towing

SOLID CONSTRUCTION - Solid all-welded design and construction for maximum strength. The powder coated finish featured with long durable use. It is not easy to be corrosed and rusted.

SAFETY - The hitch pin & clip and on-slip polyethylene step pad prevent slipping down. The maximum weight capability is 350 lbs, which is able to withstand road abuse and heavy duty towing purposes to it's specified capacities.

HIGH PERFORMANCE - You can haul a lot of stuff in your pickup truck's bed. Climbing into the vehicle to put your cargo on and out safely. It also offer protection to vulnerable, moulded bumpers in the event of a collision.

Strong and convenient

Economical stair for camper entry

Three adjustable lengths of 1/2 inch, 3-1/2 inch and 6-1/2 inch

Solid all-welded design & construction for maximum strength & safety

Able to withstand road abuse & heavy duty towing purposes to it's specified capacities

Bolt-on installation / 3" diameter round bar

Unique design gives the vehicle a rugged off road look, while being a stylish accent for today's vehicles

Rugged 10" wide tread pattern provides for safe and attractive non-slip surface made of corrosion resistant, durable cast aluminum alloy.

Rugged tread pattern provides for safe and attractive non-slip surface

Heavy Duty steel Construction for Maximum Strength & Safety

Anti Rattle Stabilizer Kit, Bolt-On Installation

36.5" Wide X 3.75" OD Oval Step Bar