Best Swagman in 2026

EASY TO ASSEMBLE: The CHINOOK hitch mount bike rack's instructions are easy to follow. Once installed you can load and unload the rack to the vehicle in under 2 minutes

CONVENIENT: Bike rack tilts down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

WORRY FREE SECURITY: Have peace of mind knowing that the adjustable locking ratchet hooks are securing the frame to the rack

EASY TO ASSEMBLE: The XTC2 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination

SAVES YOU STORAGE SPACE: Rack folds easily so that you can conveniently store when you are done using it

WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with locking ratchet hooks and locking hitch pin

EASY TO ASSEMBLE & USE: Only takes a few minutes to assemble and the upright ratchet arms easily adjusts to different bike frame sizes, will accommodate bike frames up to 59 cm (23.2")

KEEPS YOUR BIKE STABLE: Sturdy design includes a built in anti-wobble hitch device to keep bikes in place

SAVES YOU STORAGE SPACE: Rack folds easily in to compact mode so that you can conveniently store when done using it

1 bike rack wall mount storage

Fits 2" receiver style bike racks and 2” receivers with 1 ¼” universal adapter

Stores bike racks when not in use

VERSATILE: The ROAMER 84" Cross Bars will fit most bike and water sports accessories. They can also be used to mount solar panels on a camper. The square steel crossbars accept most clamp-on carriers and accessories. Use them as a car top carrier to carry kayaks, or on an RV camper to perfectly haul your bikes.

EASY TO ASSEMBLE: Directions provided help guide through an easy installation. The roof rack crossbars come with provided bolt-down hardware and rubber pad mounts and are flawless for a generic installation on a flat surface. The cross bars can also be cut to fit your specific application.

STURDY: The crossbars are made from steel with a black powder coat finish that resists rust, corrosion and fading making them solid, strong, and stable. Build a universal roof rack that holds up well to hauling kayaks and bikes at the same time!

EASY TO ASSEMBLE: The RV BUMPER ADAPTER is very easy to install it only takes 4 bolts (included) and secures tightly around the bumper

RV APPROVED: The RV BUMPER ADAPTER was put through a rigirous testing program to ensure it can handle the extra stress of being towed. You can be confident knowing the bumper adapter will get your bikes to their destination safely

STURDY: The adapter is made of solid steel and has a powder coated exterior to resist corrosion. The bumper adapter is built for a 4"- 4.5" continous welded steel bumper

EASY TO ASSEMBLE: The UPRIGHT roof rack installs in minutes following the instructions and carries one bike with no wheel removal necessary.Fits bikes with wheel base of 54” or lessFits tires up to 3” wide

VERSATILE: This rack fits square, round and oval bars up to 3" wide and multiple units can be used on a single vehicle. Maximum weight capacity of 35Ibs. per bike

SLEEK DESIGN: The minimalistic and sleek design looks great on any vehicle. It is made from sturdy plastic and steel and only weighs 5Ibs.

EBIKE APPROVED: The CURRENT hitch mount bike rack is designed for all types of bikes including fat bikes, eBike and nearly everything in between

EASY TO ASSEMBLE: Sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

CONVENIENT: Even with bikes loaded the rack can tilt away from the vehicle allowing for easy access. When not in use, the rack easily folds against the rear of the vehicle for easy access to the trunk

EASY TO ASSEMBLE: The PICKUP has a telescoping bar ensures quick and easy no-drilling installation and adjusts to fit many truck bed sizes. The rubber end pads help to grip your bed rails and prevent scratches and abrasions

WORRY FREE SECURITY: Bikes are secured on the fork mount blocks. These blocks include 9mm Quick Release skewers that anchor and secure your bikes to the rack.

VERSATILE: Transport up to 2 bikes. Maximum weight capacity of 35Ibs. per bike. The fork blocks can be repositioned along the main bar to ensure that your bikes are spaced properly

CONVENIENT: The G10 Hitch Mount Bike rack tilts down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

EASY TO ASSEMBLE: Only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination.

WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with Locking Ratchet Hooks and Wheel Ratchet Straps, as well as a Locking Threaded Hitch Pin

EASY TO ASSEMBLE: The XTC2 TILT hitch mount bike rack is light weight and only takes a few minutes to assemble following the instructions. Once assembled, simply load your bikes and you are on your way!

STURDY: Sturdy design with soft, frame friendly grip arms which hold bike in place so you have peace of mind knowing your bike will stay put!

CONVENIENT: Bike rack tilts down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

For use with Swagman Universal Racks fits 1-1/4" threaded receiver bar

Tubular high security key allows for easy access with only a half turn to unlock

Triple chrome plated for maximum rust protection; 8 feet long 10mm security cable with hitch pin

Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike)

Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper

Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion

EASY TO ASSEMBLE: The STANDARD is easy to assemble with no tools required, sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

CONVENIENT: The upright roof top carrier, easily transports 1 bike while attaching to your roof rack. Fits square, round and oval bars up to 3" wide

WORRY FREE SECURITY: Bikes are secured on the fork mount blocks. These blocks include 9mm Quick Release skewers that anchor your bikes to the rack.

EASY TO ASSEMBLE: The HANG IT storage system only takes a few minutes to install following the instructions. The floor and ceiling protective pads can pivot to adapt to uneven surfaces

DURABLE: This simple, sturdy indoor bike storage system is made with solid construction so you can take comfort knowing your bikes are secure

CONVENIENT: Store up to 2 bikes of a maximum 35lbs. each essentially anywhere in the room. Expands to a maximum height of 9 feet for a snug fit from floor to ceiling

EASY TO ASSEMBLE: The XTC4 hitch mount bike rack holds up to 4 bikes at once and is easy to assemble following the instructions

EASY TO LOAD: The set of easy to adjust, quick release tire hoops makes this a breeze to load & unload your bikes.

CONVENIENT: The center arm folds down for easy access to rear of vehicle - access your trunk conveniently without having to disassemble anything

Rear bicycle basket with space for groceries, shopping or personal items and even small pets

Mounts unobtrusively on the side of rear bicycle rack

Folds up compactly for easy storage

PAINLESS BIKE TRANSPORT: Easily attach and detach one of these hanging style hitch mounted bike accessories and efficiently get up to 4 bikes, 35lb each, safely to their destination.

STURDY AND RATTLE-FREE: The anti-wobble, threaded hitch pin and clip sturdily secure the bike rack for car to the hitch, eliminating rattle during transportation.

EASILY ACCESS REAR-CARGO: Remove pin to release the bike rack forward for easy rear cargo access.

EBIKE COMPATIBLE: eBikes or heavier bikes require a rack specifically designed to handle strain caused when carrying a heavier load. With the ESCAPEE Hitch Mount Bike Rack, you can carry 2 bikes that can weigh up to 60lbs each, with zero frame contact.

EASY TO ASSEMBLE: Sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

VERSATILE: The ESCAPEE creates zero frame contact so you don't have to worry about damage to your bike or RV. The ratcheting arms only grab the wheels and rear wheel ratchet straps firmly to hold the bikes in place.

EASY TO ASSEMBLE: The SEMI 2.0 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination

DESIGNED SPECIFICALLY FOR HIGH VALUE BIKES: Designed to accommodate premium carbon fiber and other high value bikes. Unlike other hitch mount bike racks, the pivoting arms with ratcheting hooks tightly grip the bike by the front wheel, making it a zero frame contact rack

CONVENIENT: Even with bikes loaded the rack can tilt away from the vehicle allowing for easy access to the trunk. When not in use, the rack effortlessly folds against the rear of the vehicle for safe transport

PAINLESS BIKE TRANSPORT: Easily attach and detach one of these hanging style hitch mounted bike accessories and efficiently get up to 3 bikes, 35lb each, safely to their destination.

STURDY AND RATTLE-FREE: The anti-wobble, threaded hitch pin and clip sturdily secure the bike rack for car to the hitch, eliminating rattle during transportation.

EASILY ACCESS REAR-CARGO: Remove pin to release the bike rack forward for easy rear cargo access.

Soft co-molded and form fitting cradle

60mm and 100mm bolts included

Includes 2 tie down straps with cam buckles and bow and stern straps

EASY TO ASSEMBLE: The PATROL Pickup Rack has a telescoping bar which ensures quick and easy no-drilling installation and adjusts to fit many truck bed sizes. The rubber end pads help to grip your bed rails and prevent scratches and abrasions.

KEEPS YOUR BIKE STABLE: Bikes are secured on the Impakt fork mount with the included 9mm Quick Release skewers or 15 mm thru axles. Add more bikes with additional Impakts thru axles sold separately.

VERSATILE: Transports up to 2 bike with a maximm weight capacity of 35Ibs per bike. The fork blocks can be repositioned along the main bar to ensure that your bikes are spaced properly.

EASY TO ASSEMBLE & USE: Sets up in just minutes following the instructions. Once assembled, simply load your bike and you are ready to go!

KEEPS YOUR BIKE STABLE: Sturdy design with adjustable, padded hooks that hold the bikes in place so you have peace of mind knowing they will stay put

RV APPROVED: RV's put more strain on a bicycle rack compared to a regular car, thankfully our RV approved racks have been built to withstand these conditions

PAINLESS BIKE TRANSPORT: Easily attach and detach one of these hanging style hitch mounted bike accessories and efficiently get up to 2 bikes, 35lb each, safely to their destination.

SECURE AND VERSATILE BIKE PROTECTION: The anti-sway rotating cradles with rubber straps secure your bikes to the rack at 3 points preventing bike to bike contact during transportation. They are versatile and eliminate the need for a bike adapter bar while accomodating many types of alternative frames.

CONVENIENTLY ACCESS REAR OF VEHICLE WHILE BIKES ARE LOADED: T-handle release enables rack and arms to fold down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

Carries 1 bike, fork mount roof top carrier

Includes aluminum adapters to fit 9 and 15 mm axles

Universal mount fits round, square and oval 3.5 inch cross bars

EASY TO ASSEMBLE: The SEMI 2.0 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination

DESIGNED SPECIFICALLY FOR HIGH VALUE BIKES: Designed to accommodate premium carbon fiber and other high value bikes. Unlike other hitch mount bike racks, the pivoting arms with ratcheting hooks tightly grip the bike by the front wheel, making it a zero frame contact rack

CONVENIENT: Even with bikes loaded the rack can tilt away from the vehicle allowing for easy access to the trunk. When not in use, the rack effortlessly folds against the rear of the vehicle for safe transport

Fits nearly all bike designs

Unique contemporary, minimalist design

Zinc plated steel with a durable powder Coat in pewter colour

PAINLESS BIKE TRANSPORT: Easily attach and detach one of these hanging style hitch mounted bike accessories and efficiently get up to 4 bikes, 35lb each, safely to their destination.

SECURE AND VERSATILE BIKE PROTECTION: The anti-sway rotating cradles with rubber straps secure your bikes to the rack at 3 points preventing bike to bike contact during transportation. They are versatile and eliminate the need for a bike adapter bar while accomodating many types of alternative frames.

CONVENIENTLY ACCESS REAR OF VEHICLE WHILE BIKES ARE LOADED: T-handle release enables rack and arms to fold down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

Product 1: EASY TO ASSEMBLE: The CHINOOK hitch mount bike rack's instructions are easy to follow. Once installed you can load and unload the rack to the vehicle in under 2 minutes

Product 1: CONVENIENT: Bike rack tilts down to allow access to rear of vehicle effortlessly. Saves you time and energy for more biking :)

Product 1: WORRY FREE SECURITY: Have peace of mind knowing that the adjustable locking ratchet hooks are securing the frame to the rack