Best Vehicode Brighten The Way To Future Rv Lighting in 2026

8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.

left hand driver's side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger's Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments.

It is designed to mount on the surface of a trailer and Camper etc.; there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.

Partsam (4 x White) Clear Lens 12v DC Side Marker trailer Light Mini-Sealed LED Surface mount design

These are universal.Generally people use them as clearance, side marker or identification light. It can also be used as aux backup reverse light etc.

Brightness: 80 lumen each light with 2 pcs High Quality LED Diodes; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.

Partsam (5 x Amber & 5 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber/Red, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

Package includes 2 Pieces 17 Inch Thin LED Trailer Turn Signal Light Bar with Chrome Bezels, Amber Lens. Screws are included for complete mounting;

17 Inch Amber Led Strip Light Bar 3 wres in Amber lens: 17 Inch Trailer Light bar for use as a combination turn signal and tail lamp/running lamp, can be installed anywhere you'd like to mount them as well as the size fits. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a tail light or parking light simultaneously. It can also be used as only a taillight (or only a turn signal) by using two wires and leaving the third wire unused;

This 17 inch amber led turn signal light bar is powered by 40 high power Super FLUX LED for a bright performance; Dimensions: 17.12"(L)*1.58"(W)*0.83"(H), hole to hole distance: 16" approx.;

Package includes 2pcs 7" Diameter round waterproof Led transit light 17 LED, acts as brake, tail, and turn signal light; Surface mount to trailer with mounting gasket; 3-Wire design hardwires to trailer; 4-hole surface mount with Inner reflectorized lens; Hole to Hole Mounting Space: 6-1/4" Inch

HARDWIRED WITH 3 WIRES: White Wire - Ground, Red Wire - Stop/Brake Light , Black Wire - Running/Tail Light; NOTE: the brake light and the running light can not be used at the same time;

The light is DOT (Department of Transportation) compliant for street legal lighting making it a great choice for your light needs.

Packing: 5Pcs 4" Inch Double Bullseye Led Marker Lights 10 Diodes + LED RV Combination Tail Light Kit / Driver Side with License Illuminator / White Base

Bullseye Led Marker Lights: 4" x 2" Rectangle LED trailer light functions as a clearance or side marker light; Unique double bullseye design; Surface mount; 2-Wire design; Distance between mounting holes (center on center): 3"; WIRES COME OUT AT THE LOWER CORNER, NOT THE CENTER;

RV Combination Tail Light w/ License Bracket: 8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on RV CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base; left hand driver's side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger's Side: 22 Diodes;

WONDERFUL DESIGN: This Halo Glow Square Trailer Tail Light kit is visually distinctive from most normal square tail lights on market. The light gives your truck or trailer a distinctive look and it is completely street legal. Our Halo glow tail light has a unique solid light pattern when lit, so your lights stand out from the rest, adding both style and value to your truck or trailer.

FUNCTIONS & LED: This Submersible Waterproof trailer tail light kit serves 7 functions: brake, tail, turn, side marker, side reflector, rear reflector, and license plate light; 32 Diodes ( 20 Red+8 Red+4 Red ) LED Combination stop turn tail light-Curb side; 38 Diodes ( 20 Red++8 Red+4 Red+6 White ) LED Combination stop turn tail light-Street side with license illuminator

SEALED WATERPROOF TRAILER LIGHT & APPLICATIONS: The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board; Compliant with DOT standards, perfect replacement trailer lights for under 80 Inch width towing vechile, like boat trailer, RV, tractors, canoes,truck, trailer, bus, Lorry, Van, caravan, snowmobile etc.

Partsam (2 x Red) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Red Lens, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;

Package includes 2 Pieces 4 inch Round Led Stop Turn Tail Lights Red and 2 Pieces 4 inch Round Led fog back-up reverse Lights White, Round rubber Grommets and 3-prong wire pigtails are included for complete installation;

These Waterproof round led trailer lights 12 LED serves as the following functions: stop light, turn signal light,tail light(red lights) and Backup Lights or Reverse Lights(White lights); Recessed mount with rubber grommets and Pigtails and accepts standard 3-prong plug; These round tail lights are Approx. 5 inch Grommet Ring and 4" inner diameter and 1 3/16" Thickness, Please drill a hole about 4.5" to install; IP65 waterproof and please do not use it under water;

Easy to install: White is the ground, red is the high brightness and Black for low brightness; These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each round trailer light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb; 12 Volt Input;

【Wide Operating voltage】 DC 11-18V, LED technology designed to withstand fluctuat working voltage and not still make it energy-saving and durable of more than 50000 lighting hours

【Easy Installation】2 wires connection: black is the ground and red positive; Interior and Exterior Compatible with 12 Volts DC recreational vehicles, great for RV camper motorhome travel trailer etc

【Waterproof IP65 & Durable Material】compared to old-typed gasket sealed design, the LED panel of this new type is completed sealed with resin and water will NOT get into the light or disrupt lighting even when you take off the lens. With all-weather molded plastic housing and durable lenses, it can prevents corrosion and last longer

【Wide Operating voltage】 DC 11-18V，LED technology designed to withstand fluctuat working voltage and not still make it energy-saving and durable of more than 50,000 lighting hours;

【Interior and Exterior Compatible with 12 Volts DC recreational vehicles】Easy Installation - It has 2 wires: black is the ground and red positive;

【Waterproof IP65 & Durable】 compared to old-typed gasket sealed design, the LED panel of this new type is completed sealed with resin and water will NOT get into the light or disrupt lighting even when you take off the lens. With all-weather molded plastic housing and durable lenses, it can prevents corrosion and last longer.

4.56" long x 3.78" tall x 2.63" deep; trailer light kit with 2 stud mount waterproof LED tail lights, corrosion-resistant license-plate bracket, 25ft wiring harness(one 21.98 feet and one 3.93 feet wiring harness), stainless steel mounting hardware, 2pcs amber clearance lights and 4pcs reflective sticke. 2-stud mount on 2" centers;

2 Clear/Red, waterproof, stud-mounted LED trailer tail lights for less than 80" trailers tractors truck boat snowmobile, esp. ideal for jet ski trailer lights. Square trailer light serves 7 functions: Stop light, Turn signal light, Tail light. Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator(only for LH Side/Driver Side)

For this Red submersible LED trailer light kit, Right light has 16 LEDs (12 face, 4 side); Left/streetside light has 21 LEDs (12 face, 4 side, 5 bottom). These trailer tail lights has no screws on the lamp shade, the LED trailer lights are completely welded together, The circuit board of tail light is seal. excellent tightness makes it be definitely IP67 waterproof and submersible. Of course, you can also put the clear epoxy around it for a guarantee;

Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once;

Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;

High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;

Partsam (2 x White) 4 inch Round /40 LED lamp function as Stop Turn Tail and Brake Backup Reverse Lights.

Application: Trucks,Trailers (Boat, Box, Camper, Transport), 4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining EquipmentForklifts, Buses and Coaches, Camping, Fishing

Dimensions: 4 inches; LED Quantity: 40 Diodes; Clear Lens White Light.

Clear Lens Square 39 LED Double Face Led Pedestal Lights Cab Fender Turn Signal Light with Dual Mounting Studs: 39 Total LED's : 18 Amber LED's, 18 Red LED's, and 3 Amber Side Marker LED's; Heavy Duty Chrome Plated Housing, Reflector Design; Versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees; universal stud mount design with interchangeable single or double studs

These are right and left fender mount clearance lights emiting red or amber illumination from the front or rear and also emits amber illumination from its side: Amber LEDs for turn signal & Side marker Lights, Red LEDs for brake stop light; Perfect lights to mount on your truck or trailer side fenders; Sealed high impact Polycarbonate lens & housing to prevent moisture damage; DOT (Department of transportation) compliant for street legal lighting; meet or exceed DOT and/or SAE standards

Clear Lens Dual Face Led Pedestal Lights: Red side serves 3 functions - stop, turn and tail light and Amber side serves 2 functions - parking and rear turn signal light; Built-in, amber side marker light with reflex reflector; The lights are easy to install with their double stud bolts: White Wire--Negative; White + Black--Full light on, 50% low brightness; White + Red--Back & Front light on, 100% high brightness.

Truck Trailer Molded 3 prong pigtail harness, Stop / Turn / Tail, Camper RV.

3 Prong Trailer Truck Light Pigtails. Note: The three wires may not follow the "universal" trailer light plug wiring diagram, please just switch the red and white wire for a try. Thanks

Standard 3 prong pattern.

Partsam (2 x Red) 10 diode LED Oval Lights with 4 screw holes for mounting.

Outside surface mount measures 7 1/2" L x 3 1/4" W. Actual light measures 6 3/8" L x 2 1/8" W.

DOT approved. Includes 2 Poly CHROME Trim Rings (snap-on). These are chrome plated. 6 inch polycarbonate housing/lens with poly mount and 3-pin hardwired.

6.3 inch oval red/White light serves as brake light,Stop light,tail light, Running Light, Backup Light and Reverse Light: Outer Ring of LEDs comes with dual modes(high low Beam) and function as tail brake lights; Center Clear/White LEDs act as Backup and Reverse Light;

Outer Diameter: 7.4"; Inner Diameter: 6.3"; Drill hole: 6.5"; LED Quantity: 23 LED (Inner White 7 LED + Outer Red 16 LED); IP65 waterproof light fixture; Reccessed mount with grommet; The inner Miro-Flex faceted reflector design provides increased light output with a contemporary appearance

Easy Installation With High Quality Durable oval rubber grommet, HARDWIRED WITH 4-WIRE connection system for Ground, Reverse, Brake Light and Running Light: Black Wire - Ground / Red Wire - Brake Light / Yellow Wire - Reverse Light / White Wire - Running Light/Tail light

Partsam 4" round 12 LED red tail lights in smoke black lens are general purposed trailer lights which can be used as turn signal, stop brake lights, or just tail lights. These 4 inch round LED tail lights are DOT approved and are submersible, making it suitable to be used on trailers transporting boats, jet skis, or in various other applications where the lights are expected to be exposed to water.

12 LED Diodes; Work on 12v DC, 3 wires with 2 steps Brightness , Can Modify for Signal Light , Flash Light , Emergency Light ( Flasher relay or Controler not included ); Please check the left detailed pictures for the dimensions

Compatible with almost All automobiles and devices equipped with a 8-16 Volt DC power source such as Semi Truck, Semi Trailer, SeRVice Truck, Bus, SeRVice Van, Utility Truck, Enclosed Trailer, Utility Trailer, Boat Trailer, Parade Float, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV Peterbilt, freightliner, international ,Kenworth, mack and lorries etc.

Package includes 2 Pieces led double horizontal mount taillights FULL LEDs featuring a black base with 6 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light;

These double Vertical Taillights include 2 red lenses: 1Pc replaceable red led stop, tail, and turn lights, 1Pc clear backup light with red reflex lens border and White Leds(Built-in reflex reflector removes the need for a separate reflector); This Led double tail light assemblies can be mounted oriented horizontally or vertically, whatever suits your application;

This LED Triple Tail Light is hardwired with 5 wires: White is the ground, Blue is backup/reverse light, red is high mode for stop or turn signals, black is low mode for tail or running lights; NOTE: If upgrading form halogen bulbs to led, you may need resistors to splice in or you may have hyper flash on your turn signal;

【Package Includes】20 Pieces (10Red+10Amber), Universal 4 Inch Led Side Marker Indicator Lights, Mounting Screws(screws specs: 0.3cm diameter and 2.6CM long) and Nuts are included;

【Super Bright】Each Clearance Light is built in 8 LEDs w/ miro reflectors, provide you super night visability on the road. Marker Light Size: 4" x 1.6" x 0.7" and Mounting holes spacing: 3.15in. approx.,operates form 9-16Volts;

【Easy Installation】HARDWIRED WITH TWO WIRES: BLACK IS GROUND, YELLOW IS POSITIVE; This Rectangle led light is surface moount and you can mount anywhere as long as the size fit; Usage: side marker lights, roof lights, corner lights, front turn signal lights, rear lights, identification lights fender lights,cab lights,clearance lights etc. Note: this led marker lights only come with one positive wire, one functions at a time;

Material: Made from 45 Gauge Steel S45C 1045 Heavy Duty Steel

Color: Black Painted

Dimensions: 6.3"x5.5"x3.15"; 9.05"x1.1"x0.04"; Thickness: 0.04"

PACKAGE INCLUDED: 2pcs led double horizontal mount taillights FULL LEDs featuring a black base with 6 screw holes for secure mounting, stainless steel screws are included. Also mounting gaskets are included to create a tight seal and offer some cushion behind the actual light.

These double Vertical Taillights include 2 red lenses: replaceable red led stop, tail, and turn lights with red reflex lens (Built-in reflex reflector removes the need for a separate reflector). It can be mounted oriented horizontally or vertically, whatever suits your application.

This LED Triple Tail Light is hardwired with 6 wires: White is the ground, red is high brightness for stop or turn signals, black is low brightness for tail or running lights.

Package includes 2 Pieces "Dual function" light bar in Clear Lens. It doubles as the DOT required 3 light ID bar required on any vehicle more than 80 inches wide, BUT also includes eight bright white LED lights that can be used as a back up light, Reverse Light, loading light, or light just to help you hook up a trailer at night;

Dimensions: 15.5" x 1.3" x 0.47", Hole Center to Center is 14.5" and surface mounting requiring simple about 0.57" circular cut-out. mounting screws not included; This 11 Diodes low profile waterproof 15" lamp is HARDWIRED with 3 wires: White Wire is the Ground; White+Red, Red 3 light works; White+Black, 8 bright white LED lights works;

This high quality waterproof 15" light bar with ultra-low profile and narrow width can be mounted horizontal, vertical or at an angle and also for use in unique locations where space is a premium. While narrow and thin, it meets FMVSS requirements with a wide angle of bright illumination for maximum safety;

Package includes 2 Pieces 8.5 Inch Oval Led trailer tail lights in Red Lens, 2pcs self tapping screws are included for complete mounting. It is a really nice Low profile trailer light for the back of your trailer, RV, Camper, Airstream or motor home. This led taillight is universal design 12V DC and is not vehicle specific. In fact, it can make a really nice upgrade for any kind of vehicle that you're putting these on;

These oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack;

Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light; They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light;

Partsam (5 x Amber) Trailer Truck LED Sealed 2" Round Clearance Side Marker Light w/Grommet/Pigtails, Amber Lens, Reflex Lens

12 Volt; Flush Mount; 4LED; Kit includes grommets and pigtails for complete installation; Sonically sealed, waterproof housing and lens unit is submersible

Round trailer light serves as either a side marker light or a clearance light; LEDs make great replacements for incandescent lights;