Best Walls Safety Overalls in 2026

Carhartt Company Gear Collection

The updated version of Carhartt classic R01 bib was built with feedback from Carhartt consumers. 12-ounce, 100 percent ring-spun cotton duck

Adjustable front-elastic suspenders

SUPERIOR COMFORT FIT: These coveralls feature a generous, roomy fit in the chest & shoulders, a bi-swing back to accommodate a full range of motion, elastic waist inserts for exceptional comfort, & concealed snaps at waist, neck & cuffs for secure fit

STURDY FUNCTIONALITY: These deluxe coveralls are built for hard work & fully equipped with a heavy duty brass 2-way front zipper, roomy front & back pockets secured with brass zippers, handy dual tool pockets on the right leg, and a hammer loop on left.

DURABLE WORKWEAR: This roomy coverall is built for utility, efficiency & easy care, no matter how greasy or grimy the job. Durable yet breathable poly-cotton twill resists fading, wrinkles & stains. Features heavy-duty brass zippers & concealed snaps

Bi-swing back for ease of movement and elastic waist inserts

STURDY FUNCTIONALITY: These coveralls are built for hard work & equipped for comfort & protection with a heavy duty brass 2-way front zipper secured with concealed snaps to prevent snags, roomy chest & back pockets & a handy ruler/tool pocket on right leg

DURABLE WORKWEAR: This roomy coverall is built for utility, efficiency & easy care, no matter how greasy or grimy the job. Durable yet breathable poly-cotton twill resists fading, wrinkles & stains. Features heavy-duty brass zippers & concealed snaps

Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment.

Serged seams, front zipper closure, stormflaps, collar and attached respirator fit hood

Elastic waist, wrists and ankles

12-ounce, 100% ringspun cotton duck

Ankle-to-thigh leg zippers with storm flaps and snap closures

Cordura kick panels, adjustable front-elastic suspenders

Signature Liberty green accents

Adjustable bib straps

Reinforced at stress points for added strength and classic triple needle stitching for durability

WEATHERPROOF - Windproof and water-resistant 300D performance ripstop polyester shell with PU coating protects from the elements without compromising comfort or breathability

THERMAL INSULATION - 160g insulation for warmth in extreme cold

HIGH VISIBILITY - ANSI/ISEA 107, Class E compliant with reflective tape for low-light visibility

Temp-iQ intelligent cooling for advanced temperature control

Easy care stain release

Flex technology and elastic along back of waistband

85 grams ThermaTech Insulation offers warmth in a lightweight, low bulk garment

Reinforced seat, knees, friction and scuff guards to hold up against daily wear and tear

20" Boot Zipper for easy on and off

ZERO SCRATCH. ZeroSkratch technology and covered zippers & buttons helps protect that perfect paint job from accidental scratches.

ACTION-BACK PLEATS offer additional room across the back for easy movement and range of motion.

SIDE VENTS. Strategically placed vents allow quick access to pockets or tool belt, and greater range of motion.

FLAME RESISTANT PANTS made from self-extinguishing material, tested in accordance with test method CAN/CGSB-4.2 No.27.10 & ASTM D6413 for momentary contact with open flame

WIND- AND WATERPROOF PANTS utilizing innovative technology to provide foul weather protection for deckhands, dock workers, and other heavy outdoor industries

HIGH VISIBILITY FR PANTS fully CSA Z96-15 Class 1-Level 2 compliant and ANSI/ISEA 107-2015 Type O-Class 1 compliant Vi-brance material in contrasting tape; meets WCB/Worksafe/DOT configuration

High Visability: ANSI Class III rain suit with highly reflective 3M tape and John Deere logo ensures extremely high visibility to keep you safe on the job

Water Resistant: a high visability rain suit that includes sewn and taped seams and hook and loop closures for water resistance, keeping user dry and safe on the job

Safety Gear: ANSI Class III rain suit provides greatest visability and body coverage at far distances and under poor lighting conditions keeping you safe on the job at all times

WORKWEAR DONE RIGHT: Red Kap knows all about "done right." We’ve been creating comfortable, durable workwear since starting out as a family business back in 1923. Today, we outfit 16 million Americans who apply their hands & hearts to all kinds of jobs.

Every Red Kap garment must pass rigorous testing for proof of excellence in design, engineering and construction. Compare our quality to similar garments from Carhartt, Workrite, Goodthreads, Chefworks, Cintas, Cherokee, Magellan or Duluth Trading Company

EVERYDAY EXCELLENCE: Our workwear collection is designed for the work you do everyday. Stronger seams. More durable fabrics. Pockets in just the right places. With so many features that help you get the job done, our workwear definitely has what it takes.

Hi-vis reflective tape on legs, across front, and down back

Adjustable bib straps

Reinforced bartacks at stress points for added strength

Pioneer safety pants meets ANSI/ISEA 107-20 Class E visibility requirements. When worn with CSA other gear, such as Class 2/3 reflective vests, shirts or jackets, it meets Class 3 standards

HEAVY DUTY DESIGN - Made of 300 denier PU-coated oxford polyester. Pants are 100% waterproof and windproof with 5.3 oz (180 GSM) warm quilted insulation, double stitched and heat sealed seams and have an elastic waist.

HIGH VISIBILITY & FUNCTION - Features StarTech silver reflective tape which provides excellent visibility, elastic suspenders with quick-release clips, two-way 20" leg zippers for ventilation and easy boot access, and 4 storage pockets.

This CAT2 FR/AR garment provides a Arc Rating of ATPV 11 calories/cm² and is UL certified to be NFPA 2112 compliant.

This midweight premium coverall provides CAT 2 FR/AR protection with added features for comfort and convenience

100% Cotton

Pioneer safety pants meets ANSI/ISEA Class E visibility requirements. When worn with CSA other gear, such as Class 2/3 reflective vests, shirts or jackets, it meets Class 3 standards

WATERPROOF & REFLECTIVE – Silver StarTech reflective tape provides high visibility; work rain gear pants are 100% waterproof, and are abrasion, puncture and tear resistant

HEAVY DUTY DESIGN - Fully lined and made of PU-coated ripstop polyester with double-stitched and heat-sealed seams; Includes 12” leg zippers, zipper closure inside bib pocket, and zippered fly access

Temp-iQ intelligent cooling for advanced temperature control

Flex fabric for comfort and ease of movement

Easy care stain release, Resists wrinkles

MATERIAL & CONSTRUCTION: Flame Resistant 88% Cotton / 12% Nylon twill fabric. Fabric wt. is 7 oz. Fabric complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability.

DESIGN & SIZING: Full sleeve. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image.

COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). ANSI / ISEA 107 Class 3 Compliant UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system.

THREE-PIECE SET – The rain suit comes with bibs, a detachable hood, and a rain jacket. The rain suit jacket has a zipper and snap closure to provide a secure, snug fit. It also has two front pockets for your convenience and a durable corduroy collar.

WATERPROOF – This FrogWear rain suit keeps you dry in light or heavy rains. It is constructed with PVC and Polyester along with fully taped seams that are waterproof and windproof. Stay dry in any conditions with this long-lasting waterproof rain suit.

LIGHTWEIGHT – This set is perfect for outdoor construction gear, motorcycle rain gear, camping gear, hiking rain gear, and more. Its lightweight design allows for breathability and comfort. The rain coat also has a vented back to provide airflow.

PRODUCT USES: This cotton coverall offers practicality and lightweight comfort. Reflective tape provides increased visibility ensuring safety in the workplace.

DESIGN AND FUNCTIONALITY: This Premium Cotton fabric is constructed using special long staple fibers which create a strong but soft material with excellent pilling resistance. Moisture is absorbed quickly which allows the wearer to feel cooler.

MATERIALS: Kingsmill Cotton: 100% Cotton 190g. Portwest products are manufactured to the highest standards with quality materials to ensure durability, comfort, and style.

MADE OF MICROPOROUS PE LAMINATE MATERIAL: Helps protect against certain light liquid splashes (Type 6) and hazardous dusts (Type 5). Does not contain silicone or natural rubber latex components. Suit is made of polypropylene/polyethylene laminate film. Zipper is made of nylon on polyester braid.

FIT AND COMFORT: 4510 protective coveralls combine ease and comfort thanks to neoprene rubber elastic at the waist, ankles, and wrists as well as extra material in the arms and legs to help increase mobility

SIZING: XL - For Person with height 70 - 74 inches (179 - 187 cm) with chest measurements between 43 - 45 inches (108 - 115 cm). An appropriate size garment should be selected to allow sufficient movement for the task. Meets ANSI 101-1996 (R2008) sizing guidelines

Rainwear

Manufacturer: Occunomix

Made in: United States

Waterproof PVC material - Made from 100% PVC, our chemical suit provides excellent protection against chemical splashes and spills.

Adjustable drawstring closure - The drawstring closure ensures a secure and comfortable fit, while the adjustable design accommodates a range of body sizes.

Two size options - With two size options to choose from, our chemical suit accommodates a wide range of body types. Choose from S-L or L-XXL for the perfect fit.

Quick disconnect and easy adjustable shoulder straps for quick entry

Glove color may vary

ArcGuard Arc Flash Kit

Kits Include: FR Short Coat & Bib Overall; Class 2 Voltage Gloves; Glove Protectors; Arc Flash Hood with Faceshield; Safety Glasses

Designed for use in multipurpose applications

2 inch

100 percent waterproof protection

PREPARE FOR ANYTHING: Weather is unpredictable, but don't let a little rain dampen your fun! Add this rain suit to your camping gear so you never end up all wet.

HEAVY DUTY RAIN GEAR: This rain suit comes with a jacket and overalls all made with heavy-duty polyester backed vinyl laminate construction. The extra full cut allows for heavy clothes underneath with two utility pockets in the liner.

RAIN SUITS FOR MEN AND WOMEN: Suit features include- full cut shoulders and sleeves, full bib overalls and J-hook suspenders. All jackets offer large cargo pockets and storm flaps. Also includes a hood, and double-reinforced seat, knees, and elbows.

Permanently flame resistant

Cool Climate Insulation provides optimal lightweight comfort and warmth

Wind and water resistant

【Using Denim & Leather Stitching】: This blaster suit is made of denim and leather stitching fabrics. The chest, elbows, front thighs and buttocks, which are easy to wear, are made of leather to improve durability and wear resistance. The rest of the suit adopt durable denim fabric.

【Excellent Workmanship Zipper&Buttons】: The upper body part of the suit is designed with a zipper and five press buttons. The inner side of the zipper is bound with cloth, so the zipper is more smooth when used. The press buttons design also makes it more convenient to wear and take off.

【Size of Sandblaster Suit】: Shoulder width 21.7”, arm length 24.8”, chest width 20.8”, waist width 23.2”, hip breadth 24.4”, thigh width 11.8”, leg length 43.3”, trouser width 9.8”, belt length 23.6”. There will be slight errors in manual measurement.