Best Reducer Sanitary Fittings in 2026

Pipe Size: 3/4" NPT Thread

Ferrule Size: 50.5mm, and fits 1.5" Tri-clamp

Two fittings are clamped together with a high temp silicone gasket in between

Tri Clover Compatible Clamp Style Concentric Reducer 2" X 1.5"

Concentric Reducers make a smooth sanitary connection between sanitary fitting sizes.

Fits to sanitary stainless steel tubing at both ends

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm

Not intended for pressure use

For use where systems will not exceed 140° F

Material: stainless steel 304

Tube OD: 64mm, Fits 2 Inch Tri-clamp

Type: stainless steel 304 single pin heavy duty clamp with cross hole wing nut

Connection Type(s): Tri Clamp / NPT

Connection Size：Fits Tri-Clamp: 1.5"（50.5mm Ferrule OD)

Connection Size：1 x 1/2" NPT Port

90-degree clamp elbow for connecting two pipes or tubes at an angle

Fitting connects to tubing on both ends

High Pressure Durable,ensure tight seals and reduce the possibility of leakage

High quality 304 stainless steel, having durable and long service life.

For use with rubber hoses: Barb: 1" Barb For Rubber, Plastic, TPU, or other hose.

Adapter for connecting pipes or fittings of different types. Connects to a hose on both ends.

Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis

Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access

Stainless steel 304 for resistance to corrosion and high temperatures

Ferrule fitting for providing a seal when compressed between two mating components

Attaches to a fitting to help provide a leak-resistant seal on a tube or hose

Stainless steel 304 for resistance to corrosion and high temperatures

Connection:1/2" NPT thread adaptor

Ferrule Size: 50.5mm, fits 1.5" Tri-clamp

Stainless steel 304 for resistance to corrosion and high temperatures

Pipe OD:25mm （1"）

Ferrule Size: 50.5mm fits 1.5" ferrule tri clamp

Tee with three openings for connecting and branching three pipes or tubes

End cap for closing the end of a pipe or tube

Clamp end connection for a non-permanent seal, providing access to lines

Stainless Steel 304 for resistance to corrosion and high temperatures

Teflon gasket fit standard 1.5" tri-clover or tri-clamp fittings, apply to Pipe Outer Dia: 38mm / 1.5"

Outer Diameter : 50.5mm / 2"

Inner Hole Diameter : 34mm / 1.34"

[Hex drive] Countersunk plug with a hex drive for closing the end of a pipe or fitting.4 SIZES Pipe Plugs FOR DIFFERENT NEEDS.

[application] Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc.

[Material] Made of high quality brass with superior anti-corrosive properties suitable for use in wet environments, these countersunk hex drive plugs can be extensively used for commercial, industrial, automotives, boats, sanitary pipes and fittings.

Certified by the American society of sanitary engineering to the ANSI/asse 1010-2004 standard

Lifetime cycle tested at U. S. Testing laboratories to withstand 10, 000 shock cycles. Factory tested to withstand 500, 000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega propress and all push-fitting systems

Connection: 1/2" NPT Female Thread

Ball Diameter: 38mm

Working Pressure: 1-2 bar

For use with rubber hoses: Barb: 1/4" Barb For Rubber, Plastic, TPU, or other hose

Ferrule Size: 50.5mm, and fits 1.5" Tri-clamp

Made of stainless steel 304 for resistance to corrosion and high temperatures

90-degree clamp elbow for connecting two pipes or tubes at an angle

Fitting connects to tubing on both ends

High Pressure Durable,ensure tight seals and reduce the possibility of leakage

Includes 2 x 2" Weld-on Fittings, 1 x 2" Clamp, 1 x 2" PTFE Gasket

Fit for all other home brewing stuff sanitary fittings

This Tri Clover Clamp is more easy to install than the flange connection pipe.Easy tighten thumb screw.

What you get: You will get a total of 6 sanitary tube caps suitable for 1.5 inch clamps, beautiful internal and external polishing, beautiful internal and external mirror surfaces, and smooth surface, acid and alkali resistance, corrosion resistance

Quality material: this sanitary fitting cap is made of quality stainless steel 304, therefore, it's sanitary, rust and resistance to corrosion and high temperatures with long service life

Easy replacement: it is standard size and regular material parts compatible with most standard size clover or clamp fittings, the solid end cap should be combined with a gasket and clamp to make a sanitary and easily cleanable connection

NPT Size:2 inch

Tri clamp Size: 2 inch

Milling edge is easier to install

Sanitary spool tube length: 4 Inch(102mm).

Sanitary spool tube OD: 1.5 Inch(38mm).

Sanitary spool tube fits Tri clamp: 1.5 Inch; Ferrule OD: 50.5mm.

1 x Adjustable Tri Clamp, 2 x Female Threaded Fitting, 1 x FKM Gasket.304 Stainless Steel Material

Clamp Size: 1.5" Tri Clamp; Ferrule Size: 50.5mm Pipe OD

Female Threaded Pipe Size:1/2 Inch ( DN15 )

100% Brand New and high quality

Type: Weld on Ferrule Set,high-pressure

Material: SS316 Grade Stainless Steel

Pipe OD:38mm （1.5"）

Ferrule Size: 50.5mm Ferrule OD fits 1.5" tri clamp

With FOUR openings for connecting and branching three pipes or tubes

[SIZE DETAILS]--Tri Clamp fit for 1.77inch(45mm) / 2inch(51mm) tube OD. Flange Size: 2.5"(64mm). package include: 2pcs tri clamp.

[EASY TO INSTALL]--Sanitary tri clamp is easy tighten thumb tcrew and quick to assemble .Heavy Duty for Water, Oil, and Gas. Fits for all other home brew stuff sanitary fittings sanitary hose connections.

[PREMIUM MATERIAL]--Tri clamp made of 304 stainless steel, it's has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body.

End Cap Reducer Ferrule Size 77.5mm = 2.5 Inch Tri Clamp

End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp

Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis

Includes 2 x 2" Weld-on Fittings, a 2" Clamp, and a 2" PTFE Gasket

Fittings Will Work With All Other 2" Sanitary Tri Clamp Fittings

Material: SAE 304 Stainless Steel

【Material】Made of stainless steel 304, featuring high resistance and tolerance in extreme temperature.

【Working Environment】Hose barb adapter working environment for water, oil, gas.

【Tip】Barbed fitting for a tight seal on hoses when used with a hose clamp (not included).

Body Material: Stainless Steel 304

Connection: 1/2" NPT Female Thread

Carbonation Stem Length:6 Inch