Best Gas Tube Arrestors in 2026

★ Lead-free Brass,meets California AB-1953, Vermont, and new federal standards for low lead applications. Can gurantee your family health and safe on potable and non-potable water.Applicable in residential and commercial usage.

★ Inlet 3/8" OD female COMP x 3/8" OD COMP outlet x 3/8" OD COMP outlet . Angle stop add-a Tee-type is fit your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, second faucet and Supply Lines.This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways.

★ Resists corrosion and mineral buildup, rust, and freeze damage.Have a longer using life than iron and iron galvanized products.Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

Coupling for connecting two pipes with the same diameter in a straight run

Female National Pipe Taper (NPT) threads for connecting to male threaded pipes

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Equipped with a 1/2 inch Crimp PEX inlet and 1/4 inch OD compression outlet connections

The Snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch

The box with one-piece box-and-flange design, no additional support framing required

Tee – Full slip tee sweats in-line on 1/2" CTS near problem valve or fixture

Tee – Hose tee arresters install on washing machine supply valves or directly to washing machine

Arrester body: 304 stainless steel - Piston: polypropylene with two EPDM o-rings - Tee body: UNS C36000 machined brass

【Lead Free Brass】: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet.

【Wildely Used】: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc.

【Durable】: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products.

Tee fitting for connecting and branching pipes in a range of fluid transfer applications

1/2" female NPT threads on each end for connecting pipes with male-threaded ends

CA360 brass for strength and resistance to corrosion

UNIVERSAL FIT: Features Standard FIP COMP x MIP COMP x MIP COMP Connections to Fit Your Toilets, Sinks, Washing Machine, Water Heater, Dishwasher, Stop Valves, and Supply Lines.

SPLIT YOUR WATER SUPPLY: This Supply Line Add On Tee Fitting is Great for Splitting Your Water Supply to Separate Pathways. For Example, This Will Allow You To Hook On Your Icemaker Supply Line to Your Kitchen Sink Supply in Minutes! Easy, Cheap, and Safe Solution.

SUPERIOR QUALITY: One-Piece Solid Brass Body Provides Strength, Durability, Performance, and Corrosion Resistance

Certified by the American society of sanitary engineering to the ANSI/asse 1010-2004 standard

Lifetime cycle tested at U. S. Testing laboratories to withstand 10, 000 shock cycles. Factory tested to withstand 500, 000 cycles without failure (654-c tested)

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega propress and all push-fitting systems

SHOCK PREVENTION: stops pipe banging noise common in the plumbing system

REDUCE STRAIN: mini water hammer arrestor reduces the pressure on plumbing system joints

EASY INSTALL: installation of hammer arrestor only requires simple tools

Prevent water hammer noise and absorb shock and vibration，protect your plumbing system

Connection: 3/4"GHT F x 3/4"GHT M

Max working pressure: 250psi, temperature range 33 deg F to 180 deg F

Straight copper water hammer arrester AA size,

1/2" Male pipe connection Can be installed in any direction;

Maximum working temperature is 250F,

Straight stainless steel water hammer arrester

AA size, 1/2" Male pipe connection

Can be installed in any direction;

Copper Tee water hammer arrestor

MH-220 Pex Crimp Connection. Perfect for Dishwasher connection.

Max working pressure: 250 PSI Maximum working temperature 250 F

Connection: 1/2" male NPT thread

The hammer arrestor reduces the pressure on the plumbing system

Shock prevention: Stops pipe banging noise common in the plumbing system.

Manufactured in China

Easy to use

Highly durable

Hydra-Rester male sweat fittings are compatible with press-fitting systems, such as viega process and all push-fitting systems

Lifetime cycle tested at U.S. Testing laboratories to withstand 10,000 shock cycles. Factory tested to withstand 500,000 cycles without failure (654-C tested)

Asset 1010 certified as a water hammer arrester that is “designed to provide continuous protection, without maintenance” allowing the Hydra-Rester to be installed without access panels

5/8 In. OD with 15/16-16 Thread x 48 In. stainless steel connector w/corrosion resistant coating

(2) 3/4 In. FIP steel gas fittings

106,000 BTU max flow capacity. Use with natural or LP (propane) gas

Joins 1/2" NPT male pipe or fittings at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

Manufactured in China

Easy to use

Highly durable

Unique Design

Convenient And Easy To Use

Durable And Long Lasting

Easy to install on washing machines and 3/4 inch male valves in the washing machine outlet box.

Reduce the unstable water pressure and noise, protect your washing machine.

Low lead brass body and stainless steel water hammer chamber.

Easy to install on washing machines and 3/4 inch male valves in the washing machine outlet box.

Reduce the unstable water pressure and noise, protect your washing machine.

Low lead brass body and stainless steel water hammer chamber.